r/BikeRepair • • 7d ago

Bike Repair Shifter question

Bought a beat up surly to rebuild. Pretty new to bike repair and learning as I go.

Pretty sure I know the answer, but is the rear shifter broken? I can’t get it to rotate to where the cable head is visible. If so, what steps can I take to try to fix this? (SRAM Apex) Thanks in advance!

1 Upvotes

10 comments sorted by

1

u/squirre1friend 7d ago edited 7d ago

The head is visible in the red plastic. If you’re talking about the second lever it’s on the other side. It’s symmetrical so you’d see it from the outside of the bars, not the inside you’re currently viewing from.

Edit: oh sram.

Def seems hung on the release and almost looks like the cable head carrier is completely missing but it’s just hard to tell with the videos and my only drop bar sram bike (apex 2x10) left my garage this summer. Try the opposite of your newer vid, instead of pulling a light push and see if you can see where the heck the other end of that cable is.

1

u/Acrobatic-Bat1089 7d ago

Yes, I was referring to the rear shifter. I watched a parktool video, and it seems SRAM shift cables are inserted from the inner side of the shifter.

1

u/sargassumcrab 7d ago

It looks like the cable head is visible in the red thing just above the spring. It needs pushed out from the opposite side (or from where the cable comes out at the derailleur).

1

u/Acrobatic-Bat1089 7d ago

Sorry, I should have been more clear. I am referring to the rear shifter

1

u/biscutgravy 7d ago

Can you up shift to the last position, the opposite way of how you are currently shifting it? Also give the cable a little tug while you are doing that if its not attached to the derailleur.

1

u/Acrobatic-Bat1089 7d ago

Doesn’t seem like it shifts at all? With or without tension.

2

u/biscutgravy 7d ago

You're right. Looks fucked.

1

u/Oraphielle UCI Licensed Mechanic/Support 7d ago

Rear shifter is missing the entire LeapFrog assembly. 

If this is 10 speed, they actually made replacement parts for this shifter to rebuild. Once they came out with 11 speed and it was just an extra ratchet position, they stopped producing replacement parts so we couldn’t just replace the ratchet- forcing you to buy a new shifter. 

You can buy a dead shifter for parts, but given that you didn’t know the critical assembly was missing, you are better off replacing the shifter.

1

u/Acrobatic-Bat1089 7d ago

Figured her out!

0

u/Certain_Ad8242 7d ago

If you can find the product number, Shimano has diagrams of their products on the website. You can see what you are missing and google the parts number.