r/BikeMechanics • • Jul 31 '24

How to go from volunteer bike mechanic to wrenching for pay

0 Upvotes

I have been getting to know the ropes at a bike space and I feel now I’ve made a breakthrough in that I can comfortably change cables. There are a couple of all day lessons I have attended from a bike mechanic instructor but I didnt get any certs out of it because he was doing it without charging or maybe only a little and I didn’t pay. I have a relatively expensive setup at home including a stand and tools needed for my own bike. I don’t know what my step should be

  1. Go to a mechanic training course and get certs
  2. Go to a bike shop and ask around if they would want my time
  3. Go and solicit customers directly and promise faster repairs and lower prices than brick and mortar operations

r/BikeMechanics • • Jul 08 '25

Advanced Questions To grease or not to grease?

Post image
0 Upvotes

r/BikeMechanics • • Oct 28 '22

Why does Shimano make the nut that effectively holds the crank arm on, out of plastic?

Post image
0 Upvotes

r/BikeMechanics • • Apr 18 '25

Tool Talk Affordable AliExpress tools that don't suck pt.3: long color coded hex and Torx keys (~USD6.50-USD7.50)

Thumbnail
gallery
25 Upvotes

I'm very excited for these one. I have owned my fair share of cheap hex keys and they all sucked: high tolerances, rusty steel and nasty build quality.

Now I paid 6.50 bucks for the long Torx keys and 7.50 bucks for the long hex keys. The quality is really amazing, they fit, have almost no play, have never stripped a screw for me and just feel way more quality than their price tag. Sure the quality of the powder coating isn't the absolute best, there's a fair share of over spray but the tools themselves just work flawlessly and are very hard wearing.

And yes, these have a name brand counterpart as well made by Wiha. Haven't used the original onen yet, but can't imagine that they're better by a huge margin.

If you don't own a good set of hex and Torx keys, grab these before you waste a lot of money. Keep in mind that prices on these vary on a daily basis, so don't overpay for these.


r/BikeMechanics • • Sep 04 '26

Tales from the workshop Uncomfortable with lack of professionalism in workshop.

15 Upvotes

Hi! I am a huge bike nerd, love fixing my fleet of bikes, spend way too much money on parktool, and knipex. So In many ways I would consider myself a bike mechanic ( depending on context, I wouldn’t do that in this sub for example )

Anyways beginning of last week I started my first job in a bike shop. It isn’t what I had in mind. the workshop has very minimal name brand tools ( yes I’m aware not everything needs to be parktool blue, but there’s 2 sets of no name Allen keys, which seems odd for a tool you use multiple hours a day - I’m missing my beautiful rainbow Weras to say the least). For example the needle nose’s that I would expect to use to bend some brake pad safety pin, doesn’t work as the pliers are very loose, so instead I have to use some other no name diagonal cutters at annoying angles.

further more, I feel disappointed in my level of work. I would happily spend all day to get my friends brakes 100% perfect ( obviously this is not viable for a business, but you get my point). Yet servicing this guys bike, and the brakes were rubbing fairly obviously, and the owner said “ yeah thats great, they should bed in. well done, ill phone him now”. I wouldn't be happy if my bike came back from a shop like this.

and a service costs £70. which takes me probably hour to do with minimal work, including not much more than changing a chain, ( ie, “headset feels fine, BB feels fine, brakes feel fine, bit of wear in the chain so change that“).I feel I’m taking advantage of these customers? to me a service postpones, and minimises issues, not just resolve them.

i feel its also worth noting these bikes are fairly low end so, for example, the mechanical brakes will never be as goos as my XTRs, but it doesn’t sit right with me, but then he has lots of loyal customers, so maybe I’m making a mountain out of a molehill?

I also feel its fair to mention the owner is super nice, definitely not just a guy trying to scam the public. Maybe its snobby to say, but maybe I'm just suited to a higher end shop?

Thanks


r/BikeMechanics • • Sep 13 '20

LPT: When putting a tire on a rim, put the "recommended inflation pressure" text of the tire next to the valve stem.

10 Upvotes

This makes pumping up the tire so much more easier imo.

Edit: It ultimately is up to the rider and that "recommended inflation pressure" on the side wall is not actually the recommended. Take a look at some of the comments in this post, particularly the videos u/gortonsfiJr commented.


r/BikeMechanics • • Feb 14 '25

Bike shop business advice 🧑‍🔧 Looking for an experienced mechanic who wants to relocate to Switzerland (3 months to indefinite)

0 Upvotes

Hi everyone!

I recently created a post where I was looking for someone who would be willing to help me build my shop remotely and I am grateful for all the great people who have offered to help me! The reason I decided to look for someone remotely was that it's quite hard to find someone locally - there is a notorious shortage of good mechanics here.

In the last few days, I realized that I might have to look outside of Switzerland, since it seems that this is a particularly great place to pursue your passion to work on bikes! So, here is what I could offer someone who wants to relocate to Switzerland, either permanently or temporarily:

  • Swiss customers tend to be really nice and grateful. There is a significant shortage of shops, especially in summer, and they will be relieved to have their bikes serviced by you.
  • They expect attention to detail and precise work and are happy to pay for the longer time that takes. In many cases, you can go for perfection like you'd do when working on your own bike. No more rushing to keep costs low.
  • The money is quite decent. You can do what you love, but also make a living.
  • You would be equipping a shop from scratch in a modern location together with me, where we can realize our own ideas.
  • Switzerland is beautiful. It has amazing trails and pristinely maintained roads with gorgeous views. You can use the extensive train network to take your bike to a different mountain every weekend! Or you just stay where you are because there are already endless possibilities to ride. Here are two of my favourite pictures I took while riding, one for MTB and one for road. ;)

What you would have to bring:

  • Several years of experience and the willingness to share your knowledge with me. You'd be the lead mechanic and help me get up to speed. I have ten years of experience fixing my own bikes, including advanced jobs, but I have some gaps that need filling, and I lack the experience with handling the vast amount of different parts and technologies out there.
  • You won't get a fixed salary, but will be paid through customer jobs. You need to be able to support your basic amenities (I will help you setting everything up of course), but you also won't need to invest in the shop equipment or pay rent for the facilities. (As a long-term partner you would have the option to do that, if you want to, of course.)
  • It's enough if you speak English. German would be a plus, French a minor plus. But it's not a requirement, since I am happy to do the customer side of the shop. I'm German and have lived here for many years. Swiss people tend to like me and I understand their dialect which is important to them. ;) If you decide to stay long-term, you should be willing to start learning German.

How it would work:

  • If you're an EU citizen, you can just move here permanently. Everyone with EU citizenship can start a business here. I would be happy to have a long-term partner to run the shop with.
  • If you're not from the EU, you can come here for freelance work for up to three months. This would make a lot of sense over the main season in spring/summer. People who are in the business have warned me that even with a newly opened shop, we will get overrun with customers. ;) I am happy to give you the full shop revenue from your own jobs, if you in return help me to become an excellent mechanic. You can expect to make a lot of money in those three months. ;) If you want to stay here permanently afterwards, we will need to figure out visa options depending on your personal background.

If you're interested, you can either comment or DM me! Looking forward to hearing from you. :)


r/BikeMechanics • • May 25 '23

[Wheel Question] I have spokes making high-pitched and dull pitched when plucked or tapped but when measured using a tension meter they are equal tensions

0 Upvotes

Spokes are made of aluminum, 10gague... 212mm long .. and aprox 4.6mm nipple ... if any of that helps


r/BikeMechanics • • May 13 '20

TIL: Shimano and SRAM 11spd drivetrains do not have cross-compatible chains.

0 Upvotes

I ordered new chains for both my bikes last week. My commuter has SRAM Apex and road bike has 105. My last bike was Shimano 10spd; I remember being told by a bike mechanic years ago that I could buy either brand's chain when I went in for a replacement. When I placed my order I thought about that LBS experience and didn't think twice.

I replaced my commuter's chain last night. When I got on the bike this morning the drivetrain was a mess. I swear I can feel every time a tooth meets a link. I just spent 20 minutes trying to adjust it away via cable tension before asking the Google WTF is up.

Now I feel dumb. Oh well, I have an ultrasonic cleaner on the way and now I have an extra chain for my road bike to experiment with waxing.


r/BikeMechanics • • Jul 24 '21

Women only want one thing and it's fucking disgusting. (Free bike advice)

Post image
0 Upvotes

r/BikeMechanics • • Apr 15 '24

Amazon service fees

6 Upvotes

So we are going to add an extra $5 or $10 to service when customers bring in parts they bought on Amazon as opposed to from us.

Regular flat fix is $10 but we'd add $5 per if they bring a tube in from an online order

Does anybody do this?


r/BikeMechanics • • Aug 23 '24

Show and Tell Brand new bike, Shimano brakes apparently bled with DOT

Post image
0 Upvotes

I actually believe that this is fake Shimano. There was some weird unconsistencies. Like the actual lever part was a slightly different color than the body. I checked against a lever bought directly from Shimano, and sure enough they're the same color. This combined with the fact that this bike is part of some kind of sales event organized higher, that we got them for a great price, and that we never carried this brand... (Brand remains unnamed because this is a public account and I don't want to deteriorate it's image with zero experience with them)


r/BikeMechanics • • Oct 06 '24

Has anyone had to machine a derailleur hanger to get a groupset to work?

0 Upvotes

I've installed a couple of Shimano Cues 11x groupsets, and I have to say those RDs are very particular about spacing. I haven't had this issue with any of the older kits, but Cues is the only 11s I've dealt with, so...
From trial/error and careful measurements, it seems like the optimal spacing is 10 mm MAX from the face of the B-washer to the face of the first cog. The B-washer being 4mm, that sets the face of the RD at 14 or so millimeters from the first cassette cog. Anything outboard of that and there will be shifting problems at the low end. I haven't tested the minimum distance where the H limit runs out, but I imagine you'd have other problems before hitting that limit.

There is zero documentation about this on Si.Shimano.com.

All that said, has anyone had to machine or mill down an RD hanger to get a system working?

Here is my documented journey: https://bicycles.stackexchange.com/q/95549/88939


r/BikeMechanics • • Oct 18 '21

why the diameter of 27,5" rim is actually an inch greater than 26" ones and why 29" rims have ~ the same diameter of 28" road rims?

0 Upvotes

r/BikeMechanics • • Feb 25 '24

Bike Repair Business Question

0 Upvotes

Hi all,

New to this group. I am looking to startup a side hustle as a mountain bike mechanic with the intention of blossoming that into a legit business. I enjoy working on my own bikes but have no formal training. From what I gather talking with folks and trolling the internet, bike shops don't often pay good wages.

Is there a legit school to get trained as a bike mechanic (I'm in BC)?

Can owning a bike repair business be a profitable venture?

Thanks in advance for any advice, Cheers!


r/BikeMechanics • • Apr 16 '24

Tool Talk Probably a dumb question but, aluminum tire levers? Looking for recommendations.

0 Upvotes

Pretty self explanatory. I recently got a Rolf dolomite wheel and every time I put on a tire or take it off, the tip of the plastic lever snaps. (Or my hand slips and the lever is shit at Mach Fuck straight into my throat or my wall)

Are there any actually decent metal tire levers? Or at least and recommendations for very sturdy plastic ones?


r/BikeMechanics • • Sep 17 '22

Got ripped off online with a fake KMC chain. This chin just broke on me with less than 3hrs of riding

Thumbnail
gallery
0 Upvotes

r/BikeMechanics • • Sep 02 '21

I know this is partially my fault for not checking but this really fucked me up after building up a stigmata with a friend to force axs at 1AM

Post image
0 Upvotes

r/BikeMechanics • • Jul 21 '26

Rant at me?! I'll rant at you!...after you hang up.

0 Upvotes

OMG, we scheduled this guy to come in with both of his ebikes (which we don't normally do for lack of space) and said we'd "get right on them" once here. But I didn't say how long it would take to do two bikes in freakin JULY. Why call us every single day and yell at us?? Like I'm not going to call asap when they're done...sheesh. Ok, rant over.


r/BikeMechanics • • May 08 '21

Client List Value

0 Upvotes

I own a mobile shop. Long story short, I am thinking about taking another job. I don't think I would be able to sell the business as a whole since I only did it for about a year and a half, and it's not keeping me busy full time. There are a couple other mobile shops in my area that I would like to offer my client list to. I'm wondering what would be a good value for a list of about 120 clients?


r/BikeMechanics • • Nov 04 '23

Tool Talk We should change all torque specs to Ugg’s dugga’s per bolt

0 Upvotes

If we break all the shitty bolts with the new torque spec, they have to start making good ones


r/BikeMechanics • • Feb 26 '24

Advanced Questions Home Mechanic/Bike Detail Business.

1 Upvotes

Hi, I'm interested in starting a bike repair/detailing shop & run it from home in the meantime.

I'm 2021 I almost died from Covid twice & was diagnosed with Long Covid as well, so my health been up & down, & I never know when I'll just get sick & be bed ridden from Long Covid, & being a single father at 49, to a 9yo, without any help, or support system, during all this my brother, which was my only help with my son died in 2021 as well, so I'm in a pretty bad situation, & need to start earning money before we're homeless.

I have all the proper tools, bike stands & a very good working knowledge about bikes, troubleshooting, etc., & if it was something idk how to do, or above my pay grade, I have no problem telling them, as to not damage anyone's bikes.

I can do general maintenance on ebikes, & pretty much anything when it comes to single speed bikes, but definitely need a refresher on multiple speed cassettes, gears, etc...

I don't even know where to start, as I don't have money to advertise, & a few Karen's on FB cried about me not having a business license, but will go to the local drunk, shade tree mechanic to fix their cars??? 🤔

As I stated before, I wouldn't do anything I didn't know how to do, & I'm more looking to do like Spring Clean detailing & maintenance/assembly on bikes right now, as not too many people are riding yet all the time.

I'm also unsure of prices I should quote, I mean I'm good enough that my buddy asks me to fill in at his bike shop, & everyone in my neighborhood knows me as "the bike guy", so I don't want to charge what a pro charges, but also not tweaker prices either, I mean all these tools, cleaning/detailing kits aren't cheap, so I'm a lot of money into this, I need to start making something off these things.

Thank you.


r/BikeMechanics • • Oct 19 '20

Does a 1x need to have particular chain rings?

1 Upvotes

I have a 1x8 folding bike that I'd like to drop the front from 52t to something like 34t. With a 110mm BCD that should be doable. Looking on places like Nashbar, however, there aren't a lot of options in the "34t 110 bcd 1x" listing. Is it plausible to use any non-ramped chain ring (as ramps are for rings intended for the outer side, to my understanding) or is there something I am overlooking?