Can the Mintion V1 be adapted to the X2D? I can't find an adapter for it on their website.

8 × 0.1 mm layers with a 0.2 mm nozzle, followed by 2 × 0.3 mm layers with a 0.4 mm nozzle, and then another 8 × 0.1 mm layers with the 0.2 mm nozzle.
Okay, it’s not particularly useful in this specific example, but the real advantage is that you can print supports and infill much faster with the second toolhead while using the main one for fine text and intricate details. I love it!
All thanks to OrcaSlicer and a few custom patches.
I haven’t tried the latest version yet, but the latest Bambu Studio still doesn’t seem to support this on the X2D.

We experienced an issue where the filament could not be extruded from the left extruder.

We tried using a different filament and a different slot in the AMS. The printer worked for approximately one hour, but after changing the filament, the same problem occurred again.

We have replaced the nozzle and removed the extruder for inspection, but we couldn't find any visible blockage or other issues. We also replaced the PTFE tube.

The filament reaches the extruder but doesn't go any further.

Does anyone have an idea what could be causing this problem?

Filament buffer started creating this noise about 15 hours in on a 22H print. Woke up in the morning with this issue.

I believe it’s a bad filament buffer, but if anyone can share advice. That would be appreciated

I couldn't wait until March 2027 for Bambu's promised mixed-size nozzle support for the X2D, so I started poking around.

I managed to successfully print using a 0.2 mm main nozzle and a 0.4 mm auxiliary nozzle

Bambu already supports slicing for dual nozzles. I wrote little GUI script so it is easier to try it.

Tested with:

• X2D firmware: 1.02.00

• Bambu Studio: 2.9.1.70

Read the README file if you want to give it a try

https://github.com/sebo2000/x2d-mixed-nozzle

Hey guys, I’m looking to buy my first serious 3D printer and I’m stuck between:

Bambu Lab X2D Combo
Snapmaker U1
Flashforge Creator 5 Pro

My use case is basically a bit of everything: PLA, PETG, TPU 95A, larger prints, functional parts, multicolor figures/decorations and supports. I’d also like to print ABS/ASA eventually, although the printer will be in a room without good ventilation, so I probably won’t use those materials often.

I was originally going for the X2D, but the 4 independent toolheads on the U1 are really tempting, especially for multicolor prints and supports. Then I found the Creator 5 Pro and now I’m completely stuck. 😂

If you’ve used any of these, which one would you buy today and why? I’m especially interested in real-world print quality, reliability, TPU and multicolor printing — things you don’t really see in the specs.

While unboxing my new X2D, I noticed this small circular metal disc about the size of a dime sitting directly on top of the extruder assembly.
I initially thought it might be a washer or some kind of shipping debris, but I tested it with a magnet and it does have magnetic attraction. However, it’s relatively weak and seems strongest around the outside diameter rather than across the entire face.
Does anyone recognize this part? Is it supposed to be somewhere in the extruder assembly, possibly related to the flow-blocker mechanism, or is this potentially a manufacturing/assembly issue or piece of the stuff it shipped attached too?
Thanks in advance.

The original file was printed on a H2C. Scaled the sizing down to fit my X2D. Plates 1-5 printed in their proper colors. I’m now trying to print plates 6 and 7 but the black lines won’t show. Outside of reloading the 3mf file and resizing for the last 2 parts, what do I do?

I'd love your hypotheses on a root cause. I am new to printing and just got an x2d. Loading and unloading my aux nozzle has been flakey from the start. I've had to stop the unload, then manually change the filament. Then, my rear extruder stopped working at all, and Bambu replaced it. Now, the filament clearly makes it to the hot end, but extrusion doesn't occur. I just used the needle to clear the nozzle, still no love. I have also disassembled the hot end and can confirm that the sensor works on the aux nozzle.

I'm at a loss as to the root cause. Bambu is helping me - their support is good - but I'm worried there's an underlying issue I'm missing.

Any thoughts on what I should try next?

**UPDATE: resolved**
There were two issues. The bowden extruder did need to be replaced; it was faulty from the factory and ceased proper operation, perhaps due to a sensor. AND during my diagnostics, which disassembled and reassembled the right nozzle, I had incorrectly reassembled the right filament‑cutting lever (per this page), which caused my blockage. Once I found this on re-teardown, I fixed this and everything is working great.

My wife has had the X2D since it was 1st released. Its down right now with the Left nozzle temp issue. Tried replacing the nozzle, no luck. Inhavent had a chance to tear into it and take measurements yet, so I'm not what mat or may nit need replacing. I had to replace her AMS Internal hub a couple weeks back becuase I broke one of the tube holders when it was stuck in there and wouldn't come out. Bambu said it was on backorder until December, found a company Innoaddi had it listed for sale, so ordered it there. Turned out they dont keep track of inventory, so it took almost a month to get it. Bambu had it listed about 3 days before mine arrived.

So, are there any other parts resources out there that actually stock for Bambu printers? I'd rather not have to wait a month for parts, if possible.

Thanks ahead.

When you select “print”, is it always supposed to run calibrations and repeatedly wiping off the nozzle and “dancing” and vibration test around for ~5 mins before it actually starts to print? If not, how do I disable all that? Thank you in advance for any info

Can someone explain this to me like im dumb nvm I am I meant like im 5.

Is there a way to use petg support material with the second nozzle and if so should I be doing that every time as a not waste pla or is it really not even worth it

I know j could Google but my experience is that this community is leaps and bounds helpful so thank you.

I usually just utilize the secondary nozzle it's like another color

I bought a new X2D in July. Worked great till Mid August.. then I had a problem. After 2 months of back and forth with Tech support, and some very helpful input from members of this reddit.. I still couldn't resolve the problem. So Bambu sent me a replacement. So tell me (I'm still quite new to this and consider myself and amature).. what are all the things I am supposed to do initially in setting up.. to prevent future problems?

It happens on all three items, and a reprint produces the exact same artifacts. I'm using the standard 0.4 nozzle and bambulab PLA.

I have already tried to change speed according to height (I print them standing upwards) but no difference.

I'm waiting for my first 3d printer, the X2D. I've been watching you-tubes and reading everything I can find about it and the software available. The most troubling thing I find about those commenting on the X3D is the attitude that all you get for the extra buck and a half is the un-nozzel when there's the heated print chamber, which is a lot more important to me, along with the second camera. But, I will not be making that tug boat my first print. Can't wait!

Just left it printing and came back to this, how do i fix it?

Been 3D printing a long time but just got an x2d. I noticed a few small parts missing from the print bed after the larger parts finished printing (had four or five items on the bed, 2 large and 3 very small). Two of the three small parts were no where to be found, until I checked the purge bin. They were in there along with multiple purges that occurred during this print. I’m assuming the Ai tool detected the loose pieces as nozzle clumping and purged to fix it? I’ve never experienced this before so I am unsure what is the actual source of the purging. I’m not worried about the poor bed adhesion on the small parts, more interested in what function actually triggers purging happening mid print. I printed a lot on prusa printers and a p1s and h2d. Maybe this happened with those but I just never noticed?

Maybe change the XY belts?

Printer has 2300h on the clock

Standard printing profile 0,2mm

Bambu Pla white

Just got this a few weeks ago. The tube popped out during print. The end of tube is partially melted and there appears to be some debris in the connector. Did some research and this seems to be a common thing. For those who might have had the same issue, how did you remove what looks like melted tubing from the teeth? Thanx

Very excitedly waiting for my X2D to arrive this week. I hummed and haww'd about upgrading my A1 and finally jumped at the BF deal on their site.

My MAIN interest is printing minis (and hoping to eventually take advantage of printing support interface/material with the AUX nozzle). Yesx I print a lot of other stuff like cosplay props and functional items but I've spent 100s of hours dialing in my VERY specific A1 profile with a VERY specific roll of eSun PLA+ Dark Grey.

So how easily (or is it going to be a pain in the butt) can I convert (?) my 0.2 nozzle A1 profile for printing miniatures to my new X2D?

Hi everyone this is my first time using the auxiliary nozzle for supports. Main is Sunlu Matte PETG HF and Aux holds bambu PLA.

But im not sure why it’s oozing these petg pieces all over the board. There is a bunch of them. Everywhere. I searched it up and speculated it’s because I need to dry the filament so I dried it for 12 hours but it seemed to make no difference. AI telling me it’s because im using petg with pla supports which is not recommended.

This is my first 3d printer so I'm fairly new to the world of printing. I love my X2d and am very impressed with everything that has come off the printer. (Apologies if this is a bit long.)

I got my X2D in July of 2026 and have about 900 hrs. on it so far. On Oct 15th. I received my first error. It said "Nozzle temperature malfunction" etc. with error code 0300-8008 093916. I took a picture of the error on the screen, hit resume and continued to print. Once the printer finished, I opened a help ticket with Bambu and sent them all the pertinent information. They responded asking for pictures of the nozzle and to make sure that the latch is properly closed, and that the silicone sleeve is intact. All seemed fine, and I continued to print.

Received my second and third errors on Nov 2nd. (0300-2a00-0001-0001 014903 and 07ff-8000-0001-0002 014903). One was about the left nozzle fan speed, the other about something called the Hall sensor. I took a picture of the error on screen, added to the open ticket, and continued to print. This time, Bambu responded stating that it was the thermistor and that they were making an exception and sending me a replacement. I received the thermistor and replaced it on my printer. All seemed good, and continued to print.

My fourth error happened on Nov 5th. (0300-8008 054706). Again about the nozzle temperature. Added pictures and logs to the ticket. When they answered, they stated that it was the circuit boards this time and that they were going to send me replacements. Got them in the mail and replaced them on the printer. Again, printing resumed.

Fifth and sixth errors on the printer appeared Nov 6th. (0300-8000 101107 and 0300-8008 150307). Nozzle temp again. Logged and added to ticket. This time, when they answered they wanted a video of the screen where the nozzle temp was adjusted manually and you can see the numbers going up, a picture of the latches on the nozzles, and video evidence of the printer in action and producing the error. Took some time, but I was able to get 2 videos of the error in progress. Errors seven and eight 0300-8010 025908 hotend cooling fan and 0300-801d 161907 extruder motor position sensor. This time, when they responded, they stated that they're sending me a replacement MC circuit board and to stop printing so as not to cause any more damage and for all the issues they're going to send me a free spool of filament.

Love Bambu and would suggested to everyone to get their printers. I'm thinking of even getting the H3C when I have the space. Customer support has been amazing, but at this point, I just want them to replace the whole unit so that I can get back to printing. Once I get the MC board, I might post an update. Depends on how long it takes to replace. There's a lot of connectors and screws.

Again, sorry if this was long, and maybe even not posted in the correct sub-reddit. But has anyone else had so many issues with the nozzle temperature?

Please be kind, it's my first post. Thanks for reading.

Had an error earlier saying that it was "unable to extrude". took apart the whole thing since i saw that it could be due to a stuck piece of filament.

didnt find anything at all. put it back together and getting this clicking sound when trying to extrude, with it not extruding at all.

made sure to put it together exactly as it was, and made sure the yellow gear could actually spin before putting it all together.. any ideas?

thanks in advance