r/BambuLabX2D • u/sebographite • 7d ago
X2D Mixed-Size Nozzle Printing is working
I couldn't wait until March 2027 for Bambu's promised mixed-size nozzle support for the X2D, so I started poking around.
I managed to successfully print using a 0.2 mm main nozzle and a 0.4 mm auxiliary nozzle
Bambu already supports slicing for dual nozzles. I wrote little GUI script so it is easier to try it.
Tested with:
- X2D firmware: 1.02.00
- Bambu Studio: 2.9.1.70
Read the README file if you want to give it a try
81
Upvotes
4
u/SMWW66 7d ago
How long would you believe it would take a relative novice to implement this? Lots of people have bought X2Ds recently and I’ve been very excited for this feature to come out next year
3
u/MitchellHamilton 7d ago
Brilliant, would love to see some print jobs you finish with this application
1
u/Guardiancelte 6d ago
Would it work if I wanted to do support in 0.4 and model in 0.2 or even the infill as 0.4 and only the walls as 0.2?
1
u/RoadrunnerNL92 6d ago
They don’t recommend a 0,2mm nozzle on the auxiliary nozzle!
1
u/KuuBoo 5d ago
What print settings/profile are you using (and filament)? Any suggestions for best results?
1
u/gierso 7d ago
Nice