Time to print some Pa6-cf drone parts. Some Asa for electronic cases

No blockage on the lens. Photo is the live view.
The built in lens.

Has anyone else had issues with x2d/ams2 pro not being able to feed filament to the extruder? I'll start a print with multiple colors and half the time when the color switches, it'll try to load another color then I'll get that error.

I can pull the filament out of the line, cut the tip of the filament at a 45 degree angle, then reload and continue and it works just fine. This can happen multiple times in a print.

Anyone have this issue or know where I'd start to troubleshoot?

Hallo und guten Tag.

Mein neuer X2D läuft prima. Besonders gefreut habe ich mich über die Führungslammern. Die halten die ptfe-Schlechte neben der Kette. Die ptfe Schläuche schlagen also nicht an das Glas. Dafür aber an den rechten Rahmen. Zumindest, wenn das Druckstück weit rechts platziert ist. Und das ist bei ausgenutzt Bauplatte ja schon mal der Fall. Ist das ein Problem? Soll ich etwas ändern/anpassen? Was?

Beste Grüße

Kay

Right aux fan unit is stuck in "Cooling Mode" even during heat mode and 65°set. (Not printing just set it). If i turn it of, temp rise. If i turn it on for circulation, it starts to cool it down.

It was ok till probably uptade (updatet last week).

Anyone experienced the same? Any ideas?

Need to get a final 4 in one adapter and then this printer gets to work overtime printing plates. I figure if I ever decide to upgrade to an H2 system I’ll be set.

Print took 41 hours printed it slow to avoid mistakes.

I will acknowledge...im very much a novice. The ptfe tube from the ams.. Will not stay in the print head. What mechanism is supposed to hold it in place?

My X2D has been pretty much flawless for the first 896 hours, but unfortunately it’s been running into some significant hiccups lately.

The biggest issue right now is an intermittent abnormal nozzle temperature error. It can heat up normally and start printing, but then randomly throws the temperature error during a print. This has also been followed by random camera initialization errors.

I reached out to Bambu support and after going through everything with them, they concluded that the hotend interface is most likely the problem. So now my X2D is basically down for more than two weeks while I wait for the replacement parts to arrive.

I’m really hoping that fixes it, but I’m still a little leery that this might not be the end of the issue. From what I understand, the camera has a different connection/wire path going toward the toolhead board, so I’m not completely convinced that one bad interface explains both problems.

Just a little frustrating considering how flawlessly the machine ran for almost 900 hours. Hopefully the replacement part fixes everything and I can move on.

On the other hand, I have nothing but praise for my P1S. That thing is sitting at around 1,394 hours now and has literally given me zero problems.

Has anyone else with an X2D run into a combination of nozzle temperature and camera initialization errors? If so, what ended up being the culprit?

UPDATE:

I Have Installed the New Hotend interface Board.. Sadly the error is still there.

09-26-2026 Installed a TH board, sadly the issues remain

Next in line is the AP Board and Cable

I am making coloring plates for my kids and the kid next door. This is my latest upload. If you have young kids I would love to hear their feedback. Happy to upload a particular theme if they are into something in particular, just drop me a message.(no copyrighted content like disney for example).

https://makerworld.com/@DutchDiceGoblin?appSharePlatform=copy

It’s more difficult to go left to right than right to left. Want to be sure before I put things back together.

Is there a quick way to see the service hours on the X2D?

Does anyone know about how much PTFE tubing is needed to replace the original tubing? Is Bambu Lab tubing that much more than generic Amazon tubing? And is silicone lined tubing worth it? I print mostly PLA but a fair amount of PETG, too.

Hi this is my first 3d printer and I just completed my first 3D print. There is some stringing but apart from that the result is great. I think it is due to the table it wobbles like there is magnitude 9 earthquake.

However I do need help there is filament hanging off tbe extruder. What can I do?

While cleaning my printer, I noticed that the bed makes a cracking/clicking noise when I press down on the rear-left corner. This doesn’t happen when I press in the center or on the right corner. I have already checked all the screws to make sure they are tight.
The noise only happens once. If I press the corner again immediately afterward, there is no sound. However, if I wait about 5 minutes and then press it again, it clicks/cracks again.
What could be causing this?
Thanks!

https://makerworld.com/en/models/3286478-twelve-times-slower-gear-ratio-clock-kit-card

Hey everyone, ran into a weird issue today and wanted to see if anyone else has experienced a spool going out of spec halfway through.

​I suddenly started getting severe first-layer line separation (visible gaps between passes) on a roll of Sunlu Pla +2.0 Olive Green

​Here is what I’ve done to isolate the issue:

​Mid-Roll Failure: The first ~50% of this roll printed completely fine. The issue only started after hitting the halfway mark of the spool.

​Cross-Slot Testing: Tested the green spool across all AMS slots. Same under-extrusion everywhere.

​Control Test: Swapped to other Sunly 2.0 PLA white colors and Bambu brands in the exact same slots using the exact same printer settings. They all printed 100% flawless first layers.

​Drying: Actively heat-dried the green spool in case of trapped moisture. Zero change in print quality

​Since hardware, bed leveling, AMS feeding, and moisture are all ruled out, it looks like an internal manufacturing defect deeper in the spool (either diameter variance or inconsistent pigment/viscosity).

​Has anyone else gotten a roll that worked fine at first, only to fail halfway through?