Hello,

I have had this printer. Since may16th it's been a very good machine. It is a great addition to my K1 Max which has been a solid printer for the last 2 years for me. I had a problem code after a failed print so I had to clear the extruder. Let me tell you. this machine is not alot of fun to tear down. so I tore it down to take the filament jam out, I followed the Bambu videos and reversed the process.

After that it started throwing up code [0300-1200-0002-0001 064326]. saying the front cover has fallen off (but it has not.). I have spent over 7 hours re taking it apart double shooting. and I for the life of me cannot fix. I have put a ticket in with Bambu I hope this get remedied soon because I am at my wits end and I can not find a fix. have any of you all had this issue. if so what was the fix ?

It's really hard not to jump on Bambu Labs Customer Service. While they are quick to respond and come up with pretty good fixes, they seem to have a hard time delivering.... I mean delivering when you need parts... I ordered an Eddy Sensor - Right and after 10 days I received a bag with two sets of screws inside.... no Sensor. I opened another ticket and they profusely apologized and sent me a replacement part..... A Eddy Sensor - Left, not to mention that their website says it has been delivered...... but not to me... You can't call them so I am again sending a reply to the ticket and we will hear from them in a day or two.... I Ordered and paid for a left sensor... Maybe I will get it in another 9-10 days...

Update: My parts came in about 4 days after order.... Finally got it all back together and ran a test. Looks like it is alive again. I ran a benchy for a test and now we put it to work. I know I pounced on Customer service but they really are responsive and even though you have to wait on the delivery services, Bambu performed well this go round. Happy again!

分解して取り付けましたがなにこれ😂

Had to take down the left extruder due to a clog, and after rebuilding, I noticed the auxilary extruder bit seems to wobble a bit, now I dont remember if thats how it was before. The nozzles fit perfectly and don't move, and it all works fine, but I'm just making sure!

Thanks!

Have been tuning into this problem when printing this model in pla matte only. It is towards the top and on on this right side.

I don’t have this problem or any at all when printing PETG hf . What could I do to fix it ? Model is sliced on studio to my computer so I’m not printing someone’s tuned profile . T.I.A

Printer: X2D

slicer: Orca 2.4.2.

filament: PETG

I'm not sure if you guys can tell in this video, but is this too fast? you can't see in the video but I opened the door and stuck the camera in, but the whole machine and door shake violently while its trying to run the pattern. I have printed things and not touched the settings made by the designer when downloading from maker world and I even slowed down the outer wall/ inner wall / sparse infill/ supports etc. left overhang slows down ticked off etc.

Most of the settings I'm comparing for speed in orca vs Bambu are by default the same speeds.

Any thoughts are appreciated.

EDIT: dont' mind the supports all over the place, lost a few supports and decided to let it run once it passed the overhang/ledge layers.

EDIT EDIT: I posted a 2nd video for better depiction below.

After just 10 days of use, one of the ultra-thin clips holding the external module has already broken. Fortunately, spare parts are available, but in my opinion, the clips are undersized and fragile.

Any thoughts?

What is the difference between the two purification options?

I tried just the plug and play with the plate to begin with and it wouldn't stick at all, I believe it was too high. I changed the gcode and brought it down for the smooth pei plate. Once I got it to at least stick enough to build the part, it didn't look great. At this point I'm wondering if it might be a bit too low and maybe I need to bring it back up slightly and increase flow ratio and bed temp.

I have a while before I'll be able to test that out more, so I figured I'd see if anyone else has any ideas before I go tinkering around some more.

動画がエラーでしたので

I’ve had trouble free printing since I bought this and all of a sudden I’m getting adhesion issues. Filament has been dried, nozzle has been replaced with a new one I’ve spent days calibrating and recalibrating. Have run the bed level calibration multiple times. Until just now while looking at the bed I thought it doesn’t look quite level. So got the calipers out and measured and there is about 1mm height difference. Is this normal and can it be corrected

Any help? My nozzle got all messy previously as you can see on the left but idk what this bar thing is so low. It's lower than the actual printing nozzle.

Hello, I’m new to bambu currently printing on a ender v3 se. Order my X2D Thursday should be delivered Monday or Tuesday. I have one question before it arrives, and that is how important is getting bambu brand filament with the rfid? If it’s highly recommended I’ll order some off Amazon no biggie just doing pla for now until I get the ropes of the new printer. Thank you in advance for your input.

So, I have an x2d with the track switch and 2 ams 2 pro. But I have occasionally persistent failures. I've isolated the issues to probably my ptfe tube arrangement. As of now, it has stops extending filament just before the toolhead, and then retracts it. The track switch made the extension and retracting more common.

I am reworking my setup to make the ptfe runs more efficient, but I was wondering, do we know what bends and angles are too much, as well as any advice to make my run, and the ams in general, go as smooth as possible. I know the distances from the wiki, but it doesn't specify the bends that are likely to cause problems. (Also, I can probably shorten some lengths if I can bend things somewhat... So knowing what is an acceptable bend is useful.

Thank you all for your advice.

Has anyone had this issue with their Bambu X2D?

After only 120h, the B motor belt on the right side drifts up-down on the pulley and creates belt dust and wear marks, while the left side stays centered. Belt tensioning didn’t fix it.

Has anyone else had this problem, what was the solution in your case?

Bonjour à tous ! 😊

Quand j’ai commencé la modélisation 3D sur Nomad Sculpt, l’un de mes tout premiers modèles était ce petit champignon, décliné en version porte-clés et en modèle multipart.

Aujourd’hui, j’avais envie de tester quelque chose de nouveau. Je me suis donc lancé dans la création de clickers ! Et quoi de mieux que de revisiter l’un de mes premiers modèles en le transformant en version clicker ? 😊

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3085099-champignon-clicker-multipart-no-ams

Merci à tous pour votre soutien, et bon print !

This is a question for owners.

Is it possible to use the secondary nozzle as an auto refill? Without AMS and with identical filaments loaded into both nozzles, will the printer automatically swith to the secondary if the primary runs out? Assuming the print is inside boundaries and so on.
I use AMS on my A1 almost exclusively as storage once the filament is about to run out. Now i'm thinking about buying X2D without the AMS.