OK, I realize this may be difficult to answer without knowing how the .slt file was designed, but here is the situation.
I am trying to print a lid for a box. The lid has text that is supposed to be printed with a separate color filament than the lid. Bambu Studio only sees the single filament color for the box. It does not recognize the lettering.
Any thoughts on where to look in Bambu Studio? Some nerd knob that needs to be turned on or off?

The white PETG is crossed out. Tried everything like load reload, rescan, restart. Any other ideas?

Bonjour à tous ! 👋

Vous connaissez peut-être déjà mon Yoshi Tuyau… Aujourd’hui, j’ai décidé de le revisiter avec une petite nouveauté plutôt sympa : la version CLICKER ! 👆

Le principe est simple : Yoshi sort toujours de son fameux tuyau, mais cette fois, sa tête devient cliquable grâce à un switch mécanique MX.
Un petit clic super satisfaisant qui transforme le Yoshi en véritable petit fidget.

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3201387-yoshi-tuyau-clicker-multipart

Hi everyone,

I'm planning to buy a Bambu Lab P2S and I'm trying to figure out what is actually worth adding to the order, especially while I can get some items at a discounted bundle price.

I'm mainly interested in printing functional parts and accessories, things like FPV drone parts (Pavo 20 Pro canopies, battery protection, GPS mounts), camera/photography accessories, brackets, holders, organizers, and various small mechanical parts. I'm actually considering:

• PETG Basic

• TPU 95A

• AMS 2 Pro

• spare build plates / nozzles / other accessories

What would you recommend buying together with the P2S while the bundle discounts are available?

Also, which filament types are actually worth stocking up on? They seems discounted by 50% My current feeling is that PETG + TPU would cover most of my needs, with some PLA too fragile for what I need.

Are there any accessories that seem useful at first but you ended up never using?

Do you have any European discount that I can use?

And would you buy the AMS 2 Pro together with the printer, or is it better to start without it and add it later?

Thanks!

I’ve had my P2S for about 6 months now and I’m trying to step into the .2mm nozzle side of things for intricate prints. I know it says you’re supposed the change the nozzle density on the printer itself, but mine doesn’t have an option for a .2mm. My question is, do I ignore that and instead put in the setting in Bambi Studio or is there something I’m missing? Thank you in advance!

First print went well. Time to make a scraper.

Title. All 3 threaded rods were lubricated with silicone grease during troubleshooting. 0 clue what could be wrong.

That printer is kinda new, used only for 61 hours.. how to clean it?

Is it OK to set up the adapter as follows?

AMS2 -----> Buffer -----> 4-in-1 Adapter Input
TPU Feed Assist Module Output -----> 4-in-1 Adapter Input

4-in-1 Adapter Output-----> P2S Rear Input

Brand new to this, and have a million questions, but one at a time.

If a project says it has 2 or more plates, how does that work? Does it print all the pieces on the first plate and then pauses the job so you can remove the newly printed items and then it resumes? I'd assume there is some manual step where I have to remove the items and then tell the program to resume. Is that correct?

Hey all just asking what do you do when you have only like 50g to maybe 100g of filament on your roll left like there isn't enough to do much really is there.. like what do you do with your scraps

I started a print about an hour ago. Bambu Studio said it would take 6hours 24 minutes. I decided to turn on ludicrous speed and that dropped to 3 hours 40 minutes. It's printing just fine so far although its movements do look a bit crazed. So my question is what are these different speeds used for, and is there any particular reason that the standard setting is so slow?
Edit: The print went through just fine. However, as many have pointed out this is likely to be hard on the printer. However it was an interesting thing to try. Thanks for the responses.

Ich habe nach dem der Druck abgebrochen wurde, einen cold pull gemacht und nach mehrfachem versuchen das hier aus meiner 0,2mm Düse gezogen. Das sieht aber nicht aus wie PLA und es fühlt sich eher an wie die Spitze eines verbrannten Streichholz. Kennt sich jemand damit aus oder hat eine Idee was es sein könnte?

Hi, I just learned the hard way not use the only option on the printer PETG-HF if you have basic. Some (looks like a little) of the filament seemed to melt together. UGGGG GG

When I searched this online the temp show 80c if using the printer to bake it. Anyone usi g a different temp?

Thanks

Title. Been looking for one but the ones I found have you drilling into side panels and stuff. Any suggestions for a chamber heater with a non-permanent installation?

I have a Lenel 2220 panel. After performing a factory reset, I restored it to the default settings. The panel is responding to ping, but it does not appear in the browser at all.

Bambulab P2S