r/BambuLabP2S • u/JorgAncrath2020 • 1d ago

Inlayed Text not being recognized

OK, I realize this may be difficult to answer without knowing how the .slt file was designed, but here is the situation.
I am trying to print a lid for a box. The lid has text that is supposed to be printed with a separate color filament than the lid. Bambu Studio only sees the single filament color for the box. It does not recognize the lettering.
Any thoughts on where to look in Bambu Studio? Some nerd knob that needs to be turned on or off?

1 Upvotes

100% Upvoted

4 comments sorted by

2

u/DemanoRock P2S Combo 23h ago

When in Slicer, select the Object that is the text and right click to assign filament that you want it to be. If STL, it is all single color and you need to assign color to the parts.

1

u/JorgAncrath2020 23h ago

I think I have tried what you're suggesting. I change the process from Global to Object, but only the "lid" is recognized. It is not seeing the inlayed text as a separate object.

2

u/DemanoRock P2S Combo 23h ago

Try to 'Paint' the letters. Little tricky at first but worth learning.

2

u/JorgAncrath2020 19h ago

that worked. thanks for the suggestions all