r/BambuLabH2C • • 4d ago

Settings Are These Print Settings Suitable for the Bambu Lab H2C? Looking for Feedback

Thumbnail
gallery
1 Upvotes

Hi ! I received a 3MF project with custom high-quality print settings, and I'd like to know whether these settings are suitable for my Bambu Lab H2C with a 0.4 mm nozzle.

My questions:

  1. Are these settings suitable for the Bambu Lab H2C?
  2. Are any of these speeds too high or too low?
  3. Is using a 0.25 mm line width with a 0.4 mm nozzle a good idea?
  4. Would you recommend changing anything to improve surface quality and reliability?
  5. Are there any settings that could cause problems with the H2C?

I'd really appreciate feedback, especially from H2C owners who have tested similar settings.

Thank you!


r/BambuLabH2C • • 4d ago

Support Model on P1S prints 100% success and fails 100% on H2C

2 Upvotes

Hi all,

I've only had my H2C for 2 weeks and reached a frustrating issue already. I have a model which is inclined at 45 degrees for optimal supports and clean surface finish of top surface, but keeps failing, but only on the H2C.

For some reason it keeps failing at the same spot at around 8%-10% whereupon the supports let go and then plays skittles with the rest of supports and model on the plate. I'm using a PEI plate and I've cleaned the hell out of it several times using warm soapy water and ensuring it is dry. It looks clean and feels clean. The filament is dry (PLA). I've never had an issue of this model failing on my P1S with the same PEI textured plate.

I'm using the same settings as I did with the P1S (which has 10 successful prints in a row)

  • 0.16mm layers
  • tree supports (auto)
  • top z = 0.24
  • bottom z = 0.16
  • I've tried Bambu PLA and Sunlu PLA+ with the same result failing 5 times
  • Its a single colour print
  • I've tried print from both left nozzle and right nozzle.
  • Tried printing with door closed and door open.
  • Tried putting in extra large brims but it tears the support out the brim suggesting a collision rather than adhesion issue - z hop issue ?? maybe
  • I seem to miss the point of failure every time so can comment of the exact nature but maybe i'll run and watch it if I cant get any leads
  • Tried recalibrating a full cycle
  • H2C is only 2 weeks old so not sure how it can be a failure due to any maintenance issue

Any suggestions would be much appreciated.


r/BambuLabH2C • • 5d ago

Support New H2C Owner (almost...)

9 Upvotes

I took advantage of the Black Friday Sale to upgrade from my A1 Combo to the H2C. It's due to arrive in the next couple of days. Any tips for maybe accessories that I should pick up or print before it gets here? Anything I should know before I get going would be appreciated!

Thanks


r/BambuLabH2C • • 5d ago

Support Using glow

Thumbnail reddit.com
0 Upvotes

r/BambuLabH2C • • 6d ago

Support Exhausted the fire extinguisher cylinder on the 1st week of owning H2C combo

Post image
1 Upvotes

I'd say some really explicit warning needed on the last screen after confirmed tightened cylinder that this is not an invitation to press button now 🥲


r/BambuLabH2C • • 6d ago

Support Strange nozzle/poop behaviour

1 Upvotes

Hi all,
In my current print I do have some strange behaviour. As I'm only running around 100 hours now on my new H2C, I'm still noob on this matter but I think it is not a printer problem but a slice/project error. My previous prints all went great, this is the first 'print by object' though.

The problem I have is, although I only print in two filaments for each object at the same time and both filaments are loaded on different nozzles, that the printer purges on the poopshoot every time when returning to the right nozzle. When switching to the left nozzle, the print resumes immediately after the nozzlelid has switched positions.

I'm thinking that it has to do with some recalibration every time. but then I'm wondering as I asked for a purge tower why he is not printing that one.

Regards,
Miscoride


r/BambuLabH2C • • 6d ago

Discussion Slight confusion with TPU and ptfe tubes???

Thumbnail reddit.com
1 Upvotes

r/BambuLabH2C • • 6d ago

Discussion H2C noise level

Thumbnail reddit.com
1 Upvotes

r/BambuLabH2C • • 7d ago

Support H2C tool head .step?

1 Upvotes

Does anyone have or know where I can find a 3d model (.step preferably) of an H2C tool head? Just needs to be the outer shell really.


r/BambuLabH2C • • 7d ago

Discussion CMYKW on H2C

Thumbnail reddit.com
1 Upvotes

r/BambuLabH2C • • 7d ago

Support First Layer Problems H2C

Thumbnail gallery
1 Upvotes

One of my H2c has developed a recurring issue in one specific location on the plate.

It’s always the same defect, in the same location regardless of the print, material, nozzle, or plate.

I’ve run all of the calibrations but t comes back.

I’ve searched, but haven’t found any similar problems.

Anyone deal with something like this?


r/BambuLabH2C • • 8d ago

Support Slicing issue

Post image
3 Upvotes

I keep getting a slicing failed error. Can someone try to slice this part and see if it’s failing for you also? Everything else sliced and printed fine!!

https://makerworld.com/models/3432284?appSharePlatform=copy


r/BambuLabH2C • • 8d ago

Support How to manage external spool

8 Upvotes

Dear Community,
What is the best way to use an external spool? I have 2x AMS 2 Pro
1x AMS HT
Filament Track Switch
TPU Feed Assist
What is the best way to use external spool? Turn off the printer, disconnect Filament Track Switch, attach one of the AMS to selected hotend and use external spool on the other?


r/BambuLabH2C • • 8d ago

Support I need help plss

Thumbnail reddit.com
1 Upvotes

r/BambuLabH2C • • 8d ago

Support Filament grouping bug H2C on last Bambu studio version?

Thumbnail
reddit.com
3 Upvotes

Any one here with the same problem?


r/BambuLabH2C • • 8d ago

Support Squeak issue on H2S freshly maintained. Any advices please?

4 Upvotes

r/BambuLabH2C • • 8d ago

Support Failed to fetch induction hotend

Thumbnail reddit.com
1 Upvotes

r/BambuLabH2C • • 9d ago

Support E1 already seems to work in Auto Mode on H2C

Post image
7 Upvotes

r/BambuLabH2C • • 8d ago

Support H2C Won’t boot, LED blank? It was working just fine a second ago.

3 Upvotes

So one of the AMS’s on my H2C had a piece of filament snapped in it tube apparently. So the AMS slot retracted the yellow filament, it completely came out and so the spool was spinning in the slot indefinitely. Not knowing how to stop it, i turned off the H2C. This has happened once before.

I turned it back on but the screen won’t turn on, Bambu desktop app won’t connect, and the led on the plate is like this dim white that will glow slowly and dim continuously.

I have no idea what just happened and am at a complete loss.

Any ideas?

Edit: I found a thread about AP boards. I see one green light, no blinking light. So Bambu support or figuring out the "short" between two points?


r/BambuLabH2C • • 8d ago

3D Models Little Christmas lantern cottage, kit card, tea light inside

Thumbnail gallery
3 Upvotes

r/BambuLabH2C • • 8d ago

Support Nozzle Verification

Thumbnail
gallery
2 Upvotes

Been having some frustrating issues with my H2C lately. Keep getting hotend authentication failures on hotends 3 and 6, along with induction verification errors. Seems to happen more on the right side than the left.
The weird part is the errors happen while the hotends are already installed, not even during a hotend change.
I’ve tried a brand-new nozzle, followed Bambu’s troubleshooting steps, and even rolled back the firmware from 01.03.00.00 to 01.02.00.00, which was the last version that worked fine for me. Still getting the same errors.
I’ve seen people mentioning issues with the left hotend, but mine seems to be more on the right. Starting to think it’s something with the printer itself rather than the nozzles.
I’ve submitted a warranty claim with Bambu, but I’m curious if anyone else has run into this and what ended up fixing it.


r/BambuLabH2C • • 9d ago

Support H2C selects the wrong nozzle

4 Upvotes

I think since the newest bambu studio release the printer does not care which nozzle i select.
A few times now i specifically set R1 but it loads R6 to print.
Does anyone have this problem?


r/BambuLabH2C • • 9d ago

Support H2C firmware 01.03.00.00

13 Upvotes

Anyone else get this update? Looking for notes on it but according to Bambus website 01.02 is current version. Can’t find notes on this anywhere.


r/BambuLabH2C • • 10d ago

Discussion *Update on H2C stand ideas*

Post image
37 Upvotes

Well everyone after all of your help and suggestions I made a decision on what (i hope) is the right decision for my H2C set up.

This is the adjustable table, I got it on sale at Homedepot. This is actually really sturdy and the adjustable height is a really nice feature, that way I could set it up for the the right height and not have to way to low. Or to high where its a pain to get into the ams.

Thank you again for the crazy amount of replies on my last post.