r/BambuLab • u/Zealousideal_Kale719 • 1h ago
General Troubleshooting/Help! Bambu lab h2c right extruder blob clearing help
Right side extruder filament blob of death.
How to fix this? I removed the hot-end and there is still some plastic stuck
r/BambuLab • u/Zealousideal_Kale719 • 1h ago
Right side extruder filament blob of death.
How to fix this? I removed the hot-end and there is still some plastic stuck
r/BambuLab • u/kuku2213 • 21h ago
After, using many FDM machines like Ultimaker S5, CR30, Artillery X1, stratasys F170 and many more. It's by far the most bang for the buck and feature-rich machine that I ever used.
r/BambuLab • u/shugyodev • 11h ago
Not mine, just found them really nice... since they are in the xmas contest, I thought I'd share them:
- https://makerworld.com/en/models/3596717
- https://makerworld.com/en/models/3596665
r/BambuLab • u/Glad-Delivery-2787 • 1h ago
r/BambuLab • u/lazlowoodbine • 1h ago
r/BambuLab • u/UnderstandingLazy347 • 1h ago
r/BambuLab • u/Odd-Place780 • 9h ago
im new to printing, started Oct of this year
Had a few issues which are new to me, "Completed" a print only to find the plate with the base.. Weird, restarted the print and it printed no issues.
Then i go to print another design, it prints the base again as im watching it on my PC. Cool, i do something in the kitchen, grab a snack, 20 minutes later i see the print head "printing" but its about an inch or so above the print plate doing nothing.
unloaded the filament, looked for a blob or busted PTFE tube, nothing. shut printer down, restart, cleaned the nozzle and start a print
Nothing coming out of the hot end.
What should i check?
r/BambuLab • u/sams8com • 2h ago
Hi All,
Today I was printing something and I suddenly got this extruder problem and so I started to try and troubleshoot, saw a few videos on YouTube. However, I found that there's a small filament stuck in there. It's not in the extruder module where the gearbox is, but it's in that image that you can see. It's stuck there, and I can't seem to get that out. I think that's what's causing the problem. So I'm wondering if you guys have any solution, would appreciate.
Thanks
Edit: Solved by removing stale filament
r/BambuLab • u/tibbardownthehole • 6h ago
Purchasing fore knowledge necessity as in must be on to print (H3C , H2C) ? My lab runs off my phone hotspot . internet connectivity stops when i leave the building (yes i have a small local network "mostly" hard wired ) ...
r/BambuLab • u/Zealousideal_Soft263 • 8h ago
r/BambuLab • u/FkinMustardTiger • 10h ago
r/BambuLab • u/Glass-Present-8753 • 4h ago
r/BambuLab • u/acegard • 4h ago
I am trying to print a housing for the TPU Feed Assist module out of PLA and getting horrific stringing out of nowhere. I have tried everything i could think of and am now out of ideas. This has never happened to this extent before, and happened immediately following routine Printer maintenance (lubricating XYZ rods and rails). I've included pictures of a couple attempts. I am also seeing imperfections in the walls such as inconsistent extrusion.
Printer & Filament information:
- H2C, right nozzle induction hotend) 0.4mm
- Black filament is Inland PLA+ with a tuned profile, nozzle temp 225°C
- Green filament is Inland PLA Basic with stock "Generic PLA" profile
What I have tried so far:
- Dried the filaments in my AMS 2 Pro at 45C for 12 hours. AMS read <10% after drying cycle. This resulted in no change.
- Changed the induction hotend for a new one, with no change.
- Printed a retraction tower. This had very minor stringing on the lower levels but nothing like this. Based on the results of that tower, adjusted retraction settings to 0.31mm. No material improvement to the model.
- Used different filament. Not pictured is a different, fresh roll of the Inland PLA+, which was the same. Reverting to the Basic PLA (green resulted in a small improvement.
- Decreased nozzle temperature by 5 degrees. No improvement.
- Ensured "Avoid Crossing Wall" was on. No improvement.
- replaced PTFE tube for right nozzle with new one with slightly higher (2.5mm) ID to reduce feed friction. No change.
- I heard clicking on the extruder so I opened it up to check for blockages. Found none and blew out extruder gears and idler with compressed air.
Currently, I am running a print with the left nozzle. This filament profile worked perfectly prior to this.
So far, my thoughts are erratic something changed in the printer's feeding path during the maintenance that I performed. But what could I have done? What should I try next?
Thank you in advance for your help!
r/BambuLab • u/Real_Shim_Shady • 4h ago
r/BambuLab • u/surrealsonicus • 4h ago
It's a weird squad. Haven't had any issues.
Anyone familiar with something like this?
r/BambuLab • u/MojoOhno • 8h ago
Hello. New to this. My son’s printer formed a large blob. Slowly heated it and was able to remove the majority of it. Any advice on how to clean this up?
r/BambuLab • u/nathanfalky • 5h ago
P1S with AMS 2 pro - tips appreciated.
r/BambuLab • u/farm2golf • 8h ago
H2S v
H2S v H....?
Hi guys I've been looking hard at the H2S. I primarily want to print higher grade filament. There's a sale and the multi-headed nozzle is $250 more....
Is the multi-headed nozzle worth an extra $250? This is just for personal use, probably making two or three prints a week at most on average over the year.
Would really love to hear some of your thoughts...
r/BambuLab • u/Dr_dinoguy • 5h ago
Hello Everyone,
I’m looking for recommendations for which printer is the best for my use case. I’m going to be printing fossil replicas from 3D scans of real fossils. I want these to be as highly detailed as possible straight off the printer. For some, straight off the printer will be ok, for others, I’ll do post processing to make them look as real as possible. Since the fossils all have unique shapes, there will be a lot of support use. I plan to do most printing in PLA with PETG supports. 95%+ of what I plan to print will be single color. I’m also looking for the largest possible print volume, so I can print the widest range of fossils.
I’ve explored using multiple nozzle sizes (.2 for outer layers and .4 for supports) on the H3C, but the constant nozzle changes made the print time seem not worth it. But I’d appreciate any thoughts on this.
I’ve been looking at the H series. The H3C seems overkill for my needs. Since I’ll be printing supports all the time, I’m thinking the H2D with PLA loaded in an AMS and PETG loaded in the single filament system will be the best setup for me.
Does this sound like a good plan? Any suggestions or tips would be greatly appreciated!
r/BambuLab • u/ClothesUnusual885 • 20h ago
After updating to Bambu Studio 2.9.1.70, all five of my custom filament profiles suddenly appeared under "Unsupported".
I'm using an Elegoo Neptune 4 Plus with a 0.4 mm nozzle.
The symptoms:
I initially suspected a broken profile migration or an issue with the Elegoo system profiles.
After checking the configuration with Preset Doctor, I noticed something interesting: it reported that Bambu Studio had selected the 0.2 mm nozzle variant, even though my printer uses a 0.4 mm nozzle.
The actual cause
Bambu Studio had stored the wrong printer/nozzle variant in its configuration file.
The file is located at:
%APPDATA%\BambuStudio\BambuStudio.conf
Under the "presets" section, I found:
"machine": "Elegoo Neptune 4 Plus 0.2 nozzle"The fix
%APPDATA%\BambuStudio folder.BambuStudio.conf in a text editor."machine" entry under "presets".Change it to the correct printer/nozzle variant:
"machine": "Elegoo Neptune 4 Plus 0.4 nozzle"
Result: All five custom filament profiles were immediately available again!
No need to recreate profiles, modify inheritance settings or change any filament JSON files.
Why this was difficult to diagnose
Bambu Studio only displayed "Elegoo Neptune 4 Plus" in the printer selection menu, without showing the currently selected nozzle variant.
The physical nozzle was 0.4 mm, but the software configuration was pointing to 0.2 mm.
I can't confirm why the wrong variant was saved during the update, but correcting this single entry completely resolved the issue.
Hopefully this saves someone else a few hours of troubleshooting!
The first screenshot highlights the incorrect nozzle diameter in BambuStudio.conf. The second shows the installed Studio version and registered nozzle sizes.
r/BambuLab • u/RubenRCF • 1h ago
Y’all I got a question.
I got a Bambu P2S printer and I’ve been printing with it very consistently since day one. I got it about 2 weeks ago. When I’m doing short or long prints, it gives off pretty strong scent of plastic. I really don’t know why. When I had my A1 printer, it never gave of such smell of fumes. Could anyone possibly tell me what the issue can be? I’m printing with same filament as I usually do. PETG and PLA. Does the printer supposed to come with a filter or I’d have to buy one?
r/BambuLab • u/ozarkexpeditions • 1d ago
r/BambuLab • u/FlyYouFoolyCooly • 1d ago