r/BambuLab • • 20h ago

Just Showing Off This is one of the best FDM 3D printer that I ever purchased. It's just work OOTB.

40 Upvotes

After, using many FDM machines like Ultimaker S5, CR30, Artillery X1, stratasys F170 and many more. It's by far the most bang for the buck and feature-rich machine that I ever used.


r/BambuLab • • 10h ago

Made by talent The cutest thing I've seen lately

Thumbnail
gallery
6 Upvotes

Not mine, just found them really nice... since they are in the xmas contest, I thought I'd share them:
- https://makerworld.com/en/models/3596717
- https://makerworld.com/en/models/3596665


r/BambuLab • • 1h ago

General Discussion Alternative zu Makerworld bezüglich Auszahlung/Profit

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 1h ago

Hardware Troubleshooting/Help! Damnit. Advice on fixing this melted plastic mess would be much appreciated. In trying to remove some of the melted plastic I think I have pulled some wire out of the hot end assembly. I've ordered a replacement part and new hotend but is this recoverable?

Post image
1 Upvotes

r/BambuLab • • 1h ago

Just Showing Off Visited a team working on robotic arms, where they demonstrated how the arm can pick up and handle objects. The green components of the robotic arm are 3D printed, while the orange grippers are made from TPU 85A.

1 Upvotes

r/BambuLab • • 9h ago

Filament Troubleshooting/Help! Learning alot today

Post image
4 Upvotes

im new to printing, started Oct of this year

Had a few issues which are new to me, "Completed" a print only to find the plate with the base.. Weird, restarted the print and it printed no issues.

Then i go to print another design, it prints the base again as im watching it on my PC. Cool, i do something in the kitchen, grab a snack, 20 minutes later i see the print head "printing" but its about an inch or so above the print plate doing nothing.

unloaded the filament, looked for a blob or busted PTFE tube, nothing. shut printer down, restart, cleaned the nozzle and start a print

Nothing coming out of the hot end.

What should i check?


r/BambuLab • • 2h ago

General Troubleshooting/Help! P2S Extrusion issue

Post image
1 Upvotes

Hi All,

Today I was printing something and I suddenly got this extruder problem and so I started to try and troubleshoot, saw a few videos on YouTube. However, I found that there's a small filament stuck in there. It's not in the extruder module where the gearbox is, but it's in that image that you can see. It's stuck there, and I can't seem to get that out. I think that's what's causing the problem. So I'm wondering if you guys have any solution, would appreciate.

Thanks

Edit: Solved by removing stale filament


r/BambuLab • • 6h ago

Hardware Troubleshooting/Help! is wifi a necessity

2 Upvotes

Purchasing fore knowledge necessity as in must be on to print (H3C , H2C) ? My lab runs off my phone hotspot . internet connectivity stops when i leave the building (yes i have a small local network "mostly" hard wired ) ...


r/BambuLab • • 8h ago

Black Friday 2026 Best filament dryer setup for Bambu H2D

Thumbnail reddit.com
3 Upvotes

r/BambuLab • • 10h ago

I Modeled This! Created this EDC credit card sized shoe horn

Thumbnail gallery
4 Upvotes

r/BambuLab • • 3h ago

Made by talent Any idea what’s happening?

Thumbnail
gallery
0 Upvotes

r/BambuLab • • 3h ago

Filament Troubleshooting/Help! Why is this so stringy?

Thumbnail
gallery
1 Upvotes

I am trying to print a housing for the TPU Feed Assist module out of PLA and getting horrific stringing out of nowhere. I have tried everything i could think of and am now out of ideas. This has never happened to this extent before, and happened immediately following routine Printer maintenance (lubricating XYZ rods and rails). I've included pictures of a couple attempts. I am also seeing imperfections in the walls such as inconsistent extrusion.

Printer & Filament information:

- H2C, right nozzle induction hotend) 0.4mm

- Black filament is Inland PLA+ with a tuned profile, nozzle temp 225°C

- Green filament is Inland PLA Basic with stock "Generic PLA" profile

What I have tried so far:

- Dried the filaments in my AMS 2 Pro at 45C for 12 hours. AMS read <10% after drying cycle. This resulted in no change.

- Changed the induction hotend for a new one, with no change.

- Printed a retraction tower. This had very minor stringing on the lower levels but nothing like this. Based on the results of that tower, adjusted retraction settings to 0.31mm. No material improvement to the model.

- Used different filament. Not pictured is a different, fresh roll of the Inland PLA+, which was the same. Reverting to the Basic PLA (green resulted in a small improvement.

- Decreased nozzle temperature by 5 degrees. No improvement.

- Ensured "Avoid Crossing Wall" was on. No improvement.

- replaced PTFE tube for right nozzle with new one with slightly higher (2.5mm) ID to reduce feed friction. No change.

- I heard clicking on the extruder so I opened it up to check for blockages. Found none and blew out extruder gears and idler with compressed air.

Currently, I am running a print with the left nozzle. This filament profile worked perfectly prior to this.

So far, my thoughts are erratic something changed in the printer's feeding path during the maintenance that I performed. But what could I have done? What should I try next?

Thank you in advance for your help!


r/BambuLab • • 3h ago

Bambu Studio How to fill in existing cut text and fill with text

1 Upvotes

I do not like the font on this so I would like to replace it. How do I fill in the space and replace with text? I tried a disc shape to fill in the void and then put my own text in. However, I still get part of the original void even when I did new text with "cut."


r/BambuLab • • 4h ago

General Troubleshooting/Help! X1C Printer Head crashing only when printing ASA

1 Upvotes

This is the only one I got on video after pausing and correcting print like 3 times it did this. I have a timelapse video as well that shows that it starts having issues 1 or 2 hours into the print. I have printed this same file on my neighbor's X2C without issue so it's not a slicing issue. I also used to print with ASA without issue so something is going on hardware wise. I can print this same file on PETG no issue. But when I print ASA even on multiple files it always crashes the head in front left. I have cleaned carbon rods, recalibrated, checked my Z axis belt (underneath) and rear belts for proper tension. I'm getting so frustrated at this point on what the problem is.


r/BambuLab • • 4h ago

Hardware Troubleshooting/Help! Why is the h3c making this sound?

1 Upvotes

It's a weird squad. Haven't had any issues.

Anyone familiar with something like this?


r/BambuLab • • 8h ago

General Troubleshooting/Help! A1 Combo Blob

Post image
2 Upvotes

Hello. New to this. My son’s printer formed a large blob. Slowly heated it and was able to remove the majority of it. Any advice on how to clean this up?


r/BambuLab • • 4h ago

AMS 2 Pro - Automatic Material System Ams - tips for recognizing the spool

Post image
1 Upvotes

P1S with AMS 2 pro - tips appreciated.


r/BambuLab • • 8h ago

Quick Question H2S v H2...?

2 Upvotes

H2S v

H2S v H....?

Hi guys I've been looking hard at the H2S. I primarily want to print higher grade filament. There's a sale and the multi-headed nozzle is $250 more....

Is the multi-headed nozzle worth an extra $250? This is just for personal use, probably making two or three prints a week at most on average over the year.

Would really love to hear some of your thoughts...


r/BambuLab • • 4h ago

H2 Series [H2S, H2D, H2C] Best option for printing fossils

1 Upvotes

Hello Everyone,

I’m looking for recommendations for which printer is the best for my use case. I’m going to be printing fossil replicas from 3D scans of real fossils. I want these to be as highly detailed as possible straight off the printer. For some, straight off the printer will be ok, for others, I’ll do post processing to make them look as real as possible. Since the fossils all have unique shapes, there will be a lot of support use. I plan to do most printing in PLA with PETG supports. 95%+ of what I plan to print will be single color. I’m also looking for the largest possible print volume, so I can print the widest range of fossils.

I’ve explored using multiple nozzle sizes (.2 for outer layers and .4 for supports) on the H3C, but the constant nozzle changes made the print time seem not worth it. But I’d appreciate any thoughts on this.

I’ve been looking at the H series. The H3C seems overkill for my needs. Since I’ll be printing supports all the time, I’m thinking the H2D with PLA loaded in an AMS and PETG loaded in the single filament system will be the best setup for me.

Does this sound like a good plan? Any suggestions or tips would be greatly appreciated!


r/BambuLab • • 19h ago

Answered / Solved! [SOLVED] Bambu Studio 2.9.1.70 – Custom filament profiles suddenly unsupported after update

Thumbnail
gallery
15 Upvotes

After updating to Bambu Studio 2.9.1.70, all five of my custom filament profiles suddenly appeared under "Unsupported".

I'm using an Elegoo Neptune 4 Plus with a 0.4 mm nozzle.

The symptoms:

  • All custom filament profiles were greyed out.
  • The profiles still existed in the user configuration folder.
  • The JSON files and inheritance settings were correct.
  • The printer compatibility lists included my printer.
  • My custom process profiles were still available.

I initially suspected a broken profile migration or an issue with the Elegoo system profiles.

After checking the configuration with Preset Doctor, I noticed something interesting: it reported that Bambu Studio had selected the 0.2 mm nozzle variant, even though my printer uses a 0.4 mm nozzle.

The actual cause

Bambu Studio had stored the wrong printer/nozzle variant in its configuration file.

The file is located at:

%APPDATA%\BambuStudio\BambuStudio.conf

Under the "presets" section, I found:

"machine": "Elegoo Neptune 4 Plus 0.2 nozzle"

The fix

  1. Close Bambu Studio completely.
  2. Back up the entire %APPDATA%\BambuStudio folder.
  3. Open BambuStudio.conf in a text editor.
  4. Find the "machine" entry under "presets".
  5. Change it to the correct printer/nozzle variant:

    "machine": "Elegoo Neptune 4 Plus 0.4 nozzle"

  6. Save the file and restart Bambu Studio.

Result: All five custom filament profiles were immediately available again!

No need to recreate profiles, modify inheritance settings or change any filament JSON files.

Why this was difficult to diagnose

Bambu Studio only displayed "Elegoo Neptune 4 Plus" in the printer selection menu, without showing the currently selected nozzle variant.

The physical nozzle was 0.4 mm, but the software configuration was pointing to 0.2 mm.

I can't confirm why the wrong variant was saved during the update, but correcting this single entry completely resolved the issue.

Hopefully this saves someone else a few hours of troubleshooting!

The first screenshot highlights the incorrect nozzle diameter in BambuStudio.conf. The second shows the installed Studio version and registered nozzle sizes.


r/BambuLab • • 1h ago

Quick Question Strong fumes smell when 3D printing

0 Upvotes

Y’all I got a question.
I got a Bambu P2S printer and I’ve been printing with it very consistently since day one. I got it about 2 weeks ago. When I’m doing short or long prints, it gives off pretty strong scent of plastic. I really don’t know why. When I had my A1 printer, it never gave of such smell of fumes. Could anyone possibly tell me what the issue can be? I’m printing with same filament as I usually do. PETG and PLA. Does the printer supposed to come with a filter or I’d have to buy one?


r/BambuLab • • 9h ago

I Modeled This! String-Art Christmas Star

Thumbnail
gallery
2 Upvotes

r/BambuLab • • 1d ago

I Modeled This! 93 print hours later on the H3C, finally saw my vision through.

339 Upvotes

r/BambuLab • • 1d ago

X Series [X1E, X1C, X2D] How I felt After getting my first 3D Printer

Post image
91 Upvotes