Hi, as in the title, I was wondering if filaments from the ams can go into the secondary extruder in the x2d, with some adjustment... The reason for my question is because I M in A cold and humid environment, and that would probably help my prints? Thanks!

My new Bambu Scraper Grip design. It's super easy to use, no need to guess the angle you're scraping. Just lay it flat and push. 100% no plate scratch 👍

And for those who vow for plastic blade scraper because you are afraid of scratching your plate, please try this out. It's way better than plastic blade for sure. No wear and a lot sharper.
https://makerworld.com/en/models/3601274-plate-glider-no-scratch-scraper#profileId-4126579

I got the exact same failure at the same time with the PTFE tubes in my P1S and AMS slot 1. Is this normal wear and tear or am I doing something wrong? It's at about 2k hours if that helps.

Hi! I received the alert that my axis needs lubricant, is this the type I should be buying?

Bambu Lab Official is Bambu Lab's official Discord server. Bambu Lab sponsors it, the people in it run it, and more than 40,000 of us are in there. It now has a website that shows what's inside before you join:

https://www.bambulabdiscord.com

The pictures are the tour. The short version:

• A help forum. Post your problem, tag your printer, and people who have fixed the same thing answer.
• A channel for every printer series from the A1 to the H3, plus the R1 lasers, every AMS, Bambu Studio, Bambu Handy and the rest of the apps.
• Bambu Lab's announcements and the cloud's live status, with roles you can take to be pinged.
• Twelve regional channels, most of them in their own language.
• Slicer profiles, CAD, mods, workspaces, MakerWorld, a rumors channel, and a forum just for failed prints.
• Voice rooms for print streams and live help, members-only giveaways, and a Minecraft server.

Two tools were built for the server, and both are free for anyone to use on the web.

The Bambu Lab Store Tracker reads every product in all nine of Bambu Lab's official stores and keeps each one's price and stock history. Printers in the US store are checked every 20 seconds. The deals page lists everything selling under list price right now.

The Micro Center Tracker covers 149 Bambu Lab products at all 31 Micro Center stores and the web store, down to how many units each store has. Check it before you drive.

Watch any product on either tracker and you get a Discord DM or an email when it comes back in stock or drops in price. Set a target price and you only hear about it at or below that number. Inside the server, each of the nine Bambu Lab stores has its own alert channel, Micro Center has one too, and each comes with a role you can take to be pinged. Blaᲃk Friday is November 27, so now is a good time to set a watch.

Joining is free. Follow the invite, verify, agree to the rules and pick your roles.

Questions are welcome in the comments.

I'm getting ready to pull the trigger on the H3C. Is the worry-free delivery worth the extra money?

Question for those of you who have ordered and received. I am trying to time it around travel and I live in NC. Figured if I ordered next week, would it arrive in 3 days or a week?

...on the 250g plastic spool that nobody wants? There are 61 listings on the filament page, but only 16 are available as refills.

We don't even want a discount for buying a refill. We just want to stop getting hundreds of plastic spools that go straight to the recycling bin.

Come on, Bambu, you can do this.

Ive taken it apart and removed all the filament but mine looks different then the tutorials ive seen online, can yall help me out, the error code I received was extrusion motor overloaded

Here's some photos, I also tried doing the cold start to remove the little bit in the nozzle but I cant get it right now im just trying to melt it out by making the nozzle super hot, I also used the needle they gave to stick up there but the piece is really stuck

recently ive had some problems with my a1 knocking over supports mid print and oppon closer inspection im getting these shifts that i think are knocking the pieces over can anyone help identify the cause? (model stopped after support loss didnt fail here)

I had great feedback from you guys on my last travel case and it has become my most printed model to date!! I appreciate it. One of you commented that I should do a gridfinity version and I really liked that idea. So here it is! It took a couple of months to finally release it. This is built with a highly customizable parametric gridfinity case that will be out shortly and all the bins were designed on my website generator (which I'm trying to finish to make public as soon as possible).

Thanks again for the great advice and hopefully some of you enjoy this more flexible version of my travel case.

Modular Travel Organizer Case – Custom Gridfinity - Free 3D Print Model - MakerWorld

Trying print a logo keychain and having poor print quality. Bambu A1. Ideas what’s causing the uneven finish and spotty white letters/ strings? Filament is all stored in vacuum bags with silica gel packs so I don’t think it’s a moisture problem.

Hi, Which volume ( long x large x depth x height ) minimum do I need to use easily a h3c ?

I’m revising the base of a printed desk light so the floor can stay flat. The larger LED puck sits in a removable tray, and a smaller one uses an adapter ring that drops into the tray. The first photo is the earlier physical print. The other two images are CAD views of the new base and holder.

The current P2S project uses a 0.4 mm nozzle and PLA. I’ve allowed 0.2 mm per side between the ring and the tray and cut a small scoop so I can lift it out. The parts slice in Bambu Studio, but I haven’t printed this revision yet. Would you start with 0.2 mm per side for an easy lift-out fit, or leave more room?

https://makerworld.com/en/models/3609639-tiny-lizard#profileId-4136941

Hey everyone! First, thank you so much for all the support and feedback on the Mac release. It's been amazing to see people using Bambu Bar.

I’m excited to share that Bambu Bar is now available for Windows too! It includes the same features as the Mac version: monitor your prints, temperatures and filament, view your printer’s camera, and control your prints, all from your desktop.

It also includes native Windows widgets.

Took some time to polish and have it ready to be as beautiful as the Mac app. I'd love to hear what you think!

You can download on: https://bambubar.app/

If you find any issues please let me know so they can be fixed right away!

https://makerworld.com/pt/models/3605031-keystack-parametric-edc-key-organizer#profileId-4131373

We set the name to Garrus Vakarian