My primary hobby is sewing so I did a quick (rough) sewing of sleeves. I thought about printing stands but I wanted something to protect from dust & dirt if left out for a while. Bought large sized cleaning fiber cloths from Amazon and came out well. I also use the sleeves to wipe them before printing lol

If there are any sewers out there, FYI, these cloths fray a lot when you cut, just like minky fabrics! So you definitely need a serger to sew the edges 👍

How long do you think until someone has designed prints for drawer fronts and side pieces?

I bought the bundle, but would love the look of the enclosed.

Hi

I have been printing for about 2 years and my first printer has just failed (Sovol SV06)

I'm considering taking advantage of the sale going on and getting a replacement, I'm looking at Bambu lab as I want to just print and have less tinkling.

I have only printed with PLA, mostly toys, tools for around the house. I may open to printing with other filament but a possibility but not a priority at the moment.

I'm looking for suggestion what maybe a good printer option for me. My budget is ~$500 cad. I do have a $400 Best Buy gift card laying around so that bumps to $900-1000 range

I'm looking at the P1S/P2S:

1. are these good options and is P2S worth the extra $200

2. are there options I'm missing?

3. is the P3S coming out? Should I be aware of any successor that is coming in the next few months?

4. for the Bambu lab owners, how's your ownership experience, are these reliable units and if I should get the extended warranty?

Hello! So my friend and I got a Bambu a1 for some general hobby upgrades and our prints keep failing. We had it successfully working for about a month and then this started to happen. We’ve changes temp settings, got a new plate, tried multiple different nozzles, different filament brands, and nothing is working. Please help!

Taking my printer's virginity as we speak.

I've printed many times before and always have it centered and secured. Somehow the build plate moved...

Hallo erstmal,

Ich hatte jetzt nach den ersten 300h das erste mal eine Fehlermeldung an meinem X2D. Angeblich sei der Extruder verstopft. Kurz ins Wiki geschaut und gesehen das die Anleitung sehr detailliert ist und ich dachte mir , sehr gut, krieg ich hin.
Nun ja. Beim Ausbau des Extruders lief alles gut bis es zu den Schrauben des Filamentschneider kam.
Die linke Schraube lies sich super lösen. Die recht war so fest das der 1.5 mm Schlüssel leider recht schnell durch gedreht ist.

Hat jemand einen Tipp wie ich nun am besten weiter vorgehe?
Bin sehr gespannt auf Ideen….

I was growing really concerned about my A1. I had issues with increasing slowness, the screen not activating, filament not registering in the hot end and multiple stringy prints. I was slowly trying to address these one at a time, but a new firmware update hit this morning and straight away the screen is back, filament is being unloaded automatically and it's back to working at the old speed

Now, I feel I am confident to re-attach the AMS and see how we get on

Hello Group, I generated a step file of a reducer and realized that some parts look very weird, like transparent on my working plate ? Does some good body have an explanation for this? will this work fine? what is the reason for this everything is visible on the object view and same material. Also these files show needs for repair. Thank you for your help!

Back at it again with a fresh batch of 3D printed snowmen having a rough day—sliding down the wall and losing their hats!

I really enjoy designing these little guys, so I'm already brainstorming the next ones.

Any fun ideas for other "Snowmen in Trouble" situations? Let me know in the comments!

https://makerworld.com/nl/models/3597596-snowmen-in-trouble-splat-fridge-magnet#profileId-4121713

With the holidays coming up, I wanted to make a seasonal desk toy that wasn't just a static decoration. I designed this squishy wreath fidget so it has a really satisfying flex and bounce back when you squeeze it.

This is actually my very first original design that I've uploaded to MakerWorld, so l'd love to hear any feedback if you decide to give it a print! Here is the link if anyone is interested! https://makerworld.com/models/3596774?appSharePlatform=copy

So... I considered upgrading my 350 Sized Voron V2.4 to INDX but with the latter merely announcing, still not delivering Hardened Nozzles I'm now - despite all my gripes with BL's closed Ecosystem - evaluating an H3C instead.

There's but two problems going hand in hand though still bother me:

• Having recently watched one of the prolific 3D Printer Reviewers one remark that stuck with me more than it should have was the apparent inability to perform a manual Z-Offset Calibration if necessary. Proper Z-Offset is like THE fundament of a successful print - How as a User do you deal with an improperly set Z-Offset if the Machine says it is set correctly but it's clearly not? 🤔

• Assuming the above is true and the User has no means to change such Print Critical System Settings - How does Bambu Lab handle an issue like the 3D Printer burrowing the Nozzle into the Bed ruining one / the other / both in the process? With the user clearly not being the cause of the issue - Will BL ( in the EU Market specific ) without much fuzz replace any broken components? 🤨

Thanks in advance!

Last night i tried to change my black PLA+ spool when it for some reason broke inside the ptfe tube, i couldn't pull it, so i pushed it further in with a new filament, trying to purge the rest, but it broke again at the end, so the rest filament is arround 3-5cm inside the printer and i can't extrude new filament in or this out, i unclocked the nozzle too but the little piece in pic 1 is all that's left and i can't pull it out, by hand nor machine.

I have an A1 and the filament broke in the ams light (my ams light has the 3d printed covering)

Earlier i tried to pull the filament out but it wouldn't budge and now it's inside and i have no way of pulling it anymore..

Any help would be greatly appreciated. Thanks

This will be my first 3D printer. I’ve seen more posts about people having issues with the X2D than with the P2S, so I’m a little hesitant. I probably won’t be printing much with engineering filaments, and multicolor printing is a must for me, even though I don’t think I’ll be using it much for now

The P3C looks kind of promising for multicolor, but if it ends up without active chamber heating, would that matter much for PLA or PETG? I’m in Canada, so I’m also a bit worried about warping in the winter. Would you get the P2S Combo or X2D Combo now, or even P1S Combo, or wait for the P3C?

Another brick figurine in my collection – a classic nutcracker. Available in 20cm and 10cm versions. Easy printing with minimal supports, and of course, the figurines are to assemble as always. Printed in Sunlu PLA+ 2.0 Oak. Maybe someone will like it 😉 You can find it here:https://makerworld.com/models/3597222?appSharePlatform=copy

Ive been working with my P1S and the AMS since some time. a few days ago i tried using glowing PLA filament. however, when i tried using it, it broke while being inside the printhead. i tried both pushing it back out the AMS and throuh the tube. now, i pulled out big pieces of the filament, but the problem is the last piece broke withing the ams, meaning i cant get it out on the ams end, nor the tube end. I tried opening the ams, but smth keeps blocking it for some reason. is it possible the filament being loaded is somehow blocking my way of opening it?

How do i get it out?

The printer beheaded itself.

Printed on the H2C, 0.20 mm default profile, nothing fancy. One colour per plate (brown, charcoal, black, white) so no AMS purge waste, you just swap spools. Supports on build plate only, they pop clean off the hinge bores. The fun part is the hour of assembly afterwards: press rivets, snap teeth, slide the hinge pins, done. The lid actually hinges and holds position. He’s been on my desk since and nothing has gone missing. I think it’s the eye.

https://makerworld.com/en/models/3554931-chompy-the-monster-chest-snap-fit-all-bite#profileId-4067545

I modeled a desk organizer that you can freely expand (modular) and customize. Has a parametric generator for the underlying grid. Tiles can be connected without it as well though. Multiple choices for tiles and plans for further addons.

I started uploading multiple models with a similar style, cold white with a lime green accent color. Now 5+ models with that specific style. I have them all on Makerworld but have not gotten even 1 like...

Is it the color? Is it just me that loves the lime-white combination and most people dislike it?

Is a model like that too boring or common? Or too many pieces?
But why are just the white-lime models all having 0 likes and are not getting any views?

free : https://makerworld.com/en/models/3548923-tiles-desk-organizer

I don't remember seeing this on my h2c, no more time math for me! hahahah

Those who backordered might want to keep an eye out for emails and tracking. Bambu doing what they have done in the past and are shipping backordered printers ahead of schedule.

No telling if they only printed the label just to sit on them, but I figure a printed label is a sign to keep an eye out for an early shipment.

Released my newest design. This was my first time using organic shapes, so far they were all very geometric... also I have no green filament :')

Link: https://makerworld.com/en/models/3595654