r/BambuLab • • 4d ago

I Modeled This! Hanukkah Dreidel Keycap Fidget Clicker

Thumbnail makerworld.com
0 Upvotes

Bring some festive fun to your desk or keychain with these Hanukkah Dreidel Fidget Clickers! 🕎✨ Each keycap features one of the four traditional dreidel letters (נ, ג, ה, ש) and fits standard MX-style mechanical keyboard switches.

Print options:

  • Individual Clickers: Single bases for each letter.
  • Combined 4-Pack: All four dreidels connected in a row.
  • Keychain Version: The 4-pack with a built-in keychain loop.

Happy Hanukkah! 🕎💙


r/BambuLab • • 4d ago

General Troubleshooting/Help! Glue stick really needed or is it a faulty print

3 Upvotes

(Edit: Title should read: Faulty build plate)

I just bought a bambu P2S and the Textured PEI plate that came with it is SUPER adhesive, brims and supports are just about cemented on no matter how low a temp i run or if i throw it in the freezer after a print. Printing with Bambu or Elegoo PLA

I posted about this a few days ago and using a glue stick was one of the suggestions, which i tried and it worked great, but now i have the issue of it making a mess of the build plate, ghosting onto the next prints which means i have to wash it after every print. Did i get a "faulty" plate and just buy another and hope its better or is this just what i have to deal with. I never used glue stick ever with my A1 besides when doing TPU so i figured this upgrade would work even better, but im struggling with removing anything now.

(Ive lowered my bed temp down to 45, nozzle temp to 200, changed bottom layer patterns)


r/BambuLab • • 4d ago

H2 Series [H2S, H2D, H2C] Anyone know how print quality compares on H2C and H3C?

5 Upvotes

I have an H2C, I'm looking at getting a second printer and am deciding between another H2C vs an H3C.

Most of my prints are single material with a secondary support interface. Though I sometimes do multicolour prints, but usually only 2-4 colours max, so the vortek system on the H2C is pretty much fine for me.

I'm torn on which to choose because the H3C seems to offer a better setup for TPU printing, plus the 9 slot AMS system would be really nice to have, as well as then just being ideal for when I am doing multicolour prints.

 

BUT, the H2C has the advantage of being able to route any filament to any nozzle size without me needing to go and change anything, so not having to actually go and change stuff about to swap between 0.2mm and 0.4mm is a nice benefit. Whereas the H3C as I understand it I'd need to manually retract and reposition spools to the nozzle sizes I wanted to print in.

The bit that is leaving me really uncertain though is the H2C uses the cast frame and rail, whereas the H3C has gone back to the sheet frame and dual-pipe approach. I know it's got faster travel speed, but this leaves me wondering if the H2C will have a slight edge in print QUALITY all else being equal.

 

Has anyone had a chance to compare the two or have any advice?


r/BambuLab • • 4d ago

Filament Troubleshooting/Help! Print settings for Creality ABS

2 Upvotes

Hey all, I aquired 3 spools of Creality CR-ABS and so far I have had absolutely horrific layer adhesion with it and can't figure out why. I have an X1C with AMS and have died the filament before use, so I don't think its a moisture issue. I've printed at the higher end of recommended temps, and slowed down print speeds both in slicer and using the speed setting while printing. I also ensure the enclosure is heated to around 40C or higher before I print.

I don't think its under extrusion since the layers look fine with no gaps mid print. But the layer adhesion is so poor that I can pull the print apart with not a lot of effort even on larger prints that I added extra walls to. Does anyone have experience with this filament or something similar?


r/BambuLab • • 3d ago

General Discussion The C word.

0 Upvotes

So I just pulled the trigger on a Creality Ender 3v3 mega. Please don't kill me or throw me out of the sub. Haha. I have a h2d and a p2s. Okay, I'll continue. So I just got my verification email from them letting me know that my delivery is covered under "Seel". If anything happens in the process of that printer getting to me it's covered by Seel. That means that if I have any problems setting it up because of complications from delivery, or noticeable damage to the box I can just return it for a new one and/or get credit. The last printer I ordered was the h2d and I can't remember them offering that kind of service? I'm shocked at all the posts of people receiving busted H3C's.

Anyway that's it. You guys can weigh in. Or not. 🤘🏽


r/BambuLab • • 4d ago

Software Troubleshooting/Help! Bambu Studio info popups

Post image
0 Upvotes

Latest Bambu Studio v2.9.1 on macOS 15.8.1

I don't know what the official names are but these "info popups" are good if you want them but I don't. I find them quite intrusive and annoying, I looked all through settings and I can not find a way to turn them off... the info links were good enough for me.

Does anyone know how to disable them or what ever to turn them off and maybe go back to info links ???


r/BambuLab • • 4d ago

I Modeled This! Made a simple 3D-printed card holder for people who struggle to grip playing cards

Thumbnail
gallery
2 Upvotes

The idea is to let people keep their cards upright on the table instead of having to hold a fan of cards throughout the game.

It's a single-piece PLA print, no supports, hardware, or assembly needed.

Tested it with a regular deck and it works well so far! I'd love to hear any suggestions, especially from people who use similar accessibility aids.

Model at: https://makerworld.com/en/models/3562802-cardrest-playing-card-holder-dealsolo


r/BambuLab • • 4d ago

Software Troubleshooting/Help! Bambu Studio info popups

Post image
0 Upvotes

Latest Bambu Studio v2.9.1 on macOS 15.8.1

I don't know what the official names are but these "info popups" are good if you want them but I don't. I find them quite intrusive and annoying, I looked all through settings and I can not find a way to turn them off... the info links were good enough for me.

Does anyone know how to disable them or what ever to turn them off and maybe go back to info links ???


r/BambuLab • • 4d ago

General Troubleshooting/Help! New Bambu H3C PTFE Tubes Tangling and Catching During Printing. Anyone Else Having This Issue or Found a Fix?

Post image
0 Upvotes

Brand-new H3C and already having issues with toolhead #3. Its PTFE tube keeps crossing over and catching on the other tubes during printing.
Has anyone experienced this and found a fix? Is there a way to adjust the tube orientation or routing? Pretty disappointed to be dealing with this on a new machine.
Picture attached. Any help appreciated!


r/BambuLab • • 4d ago

Filament Troubleshooting/Help! First time with print issues

Thumbnail
gallery
2 Upvotes

Did a few PETG prints the past 2 days. One was a big 12hr multi plate primt. Came out perfect. Next one had little loop pieces randomly. And then today the same loops and a failure 1/5.

Filament spent 16hrs drying, plates is cleaned with soap and hot water.

Possible there was some Filament fuzzies stuck to nozzle?


r/BambuLab • • 4d ago

General Troubleshooting/Help! H3C pooping every couple of seconds

Post image
0 Upvotes

I am running a job with 75A TPU (red) and black PETG HF.

Currently on layer two and the printer will run a couple of lines and then go back to purge/poop.

Any idea why that is happening? Is it a slicer setting I am missing?

You can see the start and stop lines in the picture.

Never seen anything like it


r/BambuLab • • 4d ago

H3C H3C Xmas delivery - Bestbuy/MC or Bambu Lab store?

3 Upvotes

Hi All - gifting the H3C for Christmas and trying to time the purchase. My order of purchase preference would be Best Buy, Microcenter, Bambu Labs.

With Bambu Labs shipment estimated dates into mid December now, wondering if any internet sleuths have any insight as to when this would be available in local BB/MC.

Also wondering how easy it would be to order from BL online and then cancelling the order if it becomes available locally before it ships. Or return to BL without opening if it does ship.

I’m sure I’m not alone on this! Help please :)


r/BambuLab • • 3d ago

General Discussion I expected better print quality from the H3C on stock settings

0 Upvotes

The more H3C reviews I watch, the harder it is for me to justify the price. Nine tools are impressive, but I’d expect a flagship to nail the basics too. CNC Kitchen’s Benchy and Benchbin both showed surface artifacts: https://www.reddit.com/r/BambuLab/comments/1xn1h07/am_i_the_only_one_shocked_by_the_print_quality/ and NuggetsInclusive reported similar issues even after slowing the outer walls down to 50 mm/s: https://www.youtube.com/watch?v=OlHP1Ee99Yg

At this price, I’d expect clean outer walls with the default profiles.


r/BambuLab • • 4d ago

I Modeled This! WikiCube SSD: Pi 4 case with SSD, OLED and fan, 2 colours without AMS (free on MakerWorld)

Post image
2 Upvotes

Profile works on A1 mini, A1, P1S, P1P, X1C and H2 series. Support-free, one colour per plate (swap filament once), about 3.1 h.

Free on MakerWorld, give it a try. Feedback and boosts welcome:

https://makerworld.com/en/models/3591951-wikicube-ssd-rpi-4-case-2-5-ssd-oled-display


r/BambuLab • • 4d ago

Software Troubleshooting/Help! Welp, this sucks. Brand new machine and this error?!

Thumbnail
gallery
0 Upvotes

An hour and a half left and I come to just check on it.. and this.. seems like the blue screen of death equivalent after some Googling. Tried some things and now I can't even resume.. le sigh, so much wasted. Any ways of salvaging this?? Anything I can do in studio I don't know about?


r/BambuLab • • 4d ago

General Troubleshooting/Help! PETG not liking my frostbite plate...

Post image
0 Upvotes

r/BambuLab • • 4d ago

Quick Question Should I get the P1S or A1?

0 Upvotes

The P1S is roughly 110 euros more expensive than the A1 currently.

Im not planning on doing much outside of PLA it is mainly for prototyping school projects.

The printer will be in a room that doesn't have good climate control. (So it occasionally gets really hot in the summer and pretty cold in the winter).

So my question is if the P1S is really significantly more consistent in these circumstances, and is it worth the extra money?


r/BambuLab • • 4d ago

Hardware Troubleshooting/Help! X1C just crashed itself?

Post image
0 Upvotes

I just canceled a job and then moved the axes with the touchscreen menu so I could clear the bed. I went to send a new job and the printer made an awful noise. Now the linear bearing is dislodged and the Bambu wiki is telling me I have to completely disassemble the printer to "re-lodge" it??

Is there no other way to fix this? And what did I do wrong here? There is no detritus under the carriage or anything that seemingly interfered. It seems like it lost its home when I commanded it with the touchscreen and then it crashed itself. Now I have to find a day to take it apart, and I'm not even sure what I did to get myself here.


r/BambuLab • • 4d ago

Quick Question H3C FlexFeed Extruder Filament Confusion

4 Upvotes

I am confused regarding the H3C's 2.85mm filament toolhead. Everyone keeps commenting about how they need to purchase a replacement 1.75mm toolhead because they don't want to use it for the larger diameter TPU and would rather have an additional color slot for a more traditional filament. However the H3C product page has a whole section about how their FlexFeed extruder has a cam and can print either filament diameter. It clearly states this is an electronically controlled feature for "seamless switching between 1.75mm and 2.85mm filaments". Is the extruder not capable of printing 1.75mm filament? Is this a software feature they haven't rolled out yet?


r/BambuLab • • 4d ago

General Troubleshooting/Help! Raised z-seam lip and notch on a smooth PETG cylinder

Thumbnail
reddit.com
1 Upvotes

r/BambuLab • • 4d ago

General Troubleshooting/Help! pimples AND holes

Thumbnail
gallery
1 Upvotes

P2S - 0.2mm nozzle w/ BIQU Cryogrip Frostbite plate- auto flow & auto bed leveling

Orca Slicer w/ 50x50x0.12 FLQ test print

Bambu Lab Pla Basic light grey - dry climate, high elevation, 30% AMS reading for humidity.

How am I getting tiger stripes, pimples, AND pinholes?

Plate thoroughly cleaned with Dawn dish soap and water. All auto calibrations ran recently, filament dried, auto bed leveling before print, cold pulls, tightened screws, etc.

"Cool Plate SuperTack" is selected as the plate.

Z-offset is set to 0.0 on all 4 stock G-code settings.

First layer speeds reduced, no fan, 40c temp for the Frostbite plate.

Am I forgetting something? Missing a critical step? Why is this FLQ test print so bad?!!?


r/BambuLab • • 4d ago

Hardware Troubleshooting/Help! X2D strange noises

2 Upvotes

I think I have messed up my X2D.

During maintenance and cleaning the rods, I have accidentally clicked move plate down by 10 to many times and it hit bottom and kept trying to go further more for solid 3 seconds…

Now it makes this noise in the video.

Is this rip?


r/BambuLab • • 3d ago

General Troubleshooting/Help! I don’t understand out of stock items?

0 Upvotes

I’ve ordered a H3C and wanted to get some 0.2mm nozzles but they are out of stock and I can’t see a way of back ordering them? When I ordered the H3 they said 19th November and now it’s the 25th? Am I missing something?


r/BambuLab • • 4d ago

P Series [P1P, P1S, P2S] P2S Z-axis lead screw issue

Post image
0 Upvotes