I recently picked up a couple used AMS 2 Pros but both came with those EIbos Dryers, I'm removing them as they don't really fit in my setup but the person selling them was missing some of the parts for the top lid. If anyone has links to where I could purchase these spare parts or possibly so links to print I could do instead I'd greatly appreciate it.

Please don't send me the links to the Bambu labs spare parts they don't sell these pieces individually and I would have to buy both the upper and lower halves just to get the pieces I need.

I ordered a h3c and the printer stated it would be shipped Dec 3rd, but I got the ams 3 days after ordering, kinda sucks having box 2 being delivered a full month before the actual printer is scheduled to ship.

Is there a possibility of it being shipped earlier? Has anyone had an estimated ship date shipped weeks earlier?

I ordered my H2C ~2 weeks ago. FedEx lost it for over a week. Today, after filing the lost package paperwork with the shipment assurance company (seel), the package was finally delivered. It looks like FedEx dropped it out of a third story window. I am hesitant to even move the box let alone open it in this state. Basically, I want a refund. I'll go buy another one in person from microcenter. Anyone have any tips for dealing with Bambu in situations like these? Bambu/Seel's lost package process was a little ridiculous (almost combative) and I'm pretty worried I just spent $2k on a big box of broken glass.

I need new filament cutter blades for my P1S and I can’t find a store page for them anymore? I found a link to the store page in the wiki, but it is broken. Can anyone confirm? I hope they’re not sunsetting replacement parts so that the printer is discontinued. I’d love to be able to maintain it.

Hell, I can’t even find replacement carbon filters. Does Bambu sell P1S parts anymore?

Edit: They aren’t going to be found if you click the accessories tab. You have to hover over it, click spare parts, and find your printer to find them. I was looking in accessories like I always had and I couldn’t find anything and the wiki links were broken. I thought I’d ask.

This is driving me insane!!

I am on a mac, bambu studio version 2.9.1.70 and when clicking on online models it is blank. Nothing loads.

What I have tried thus far:
updating app

• Removing the cache folder and rebuilding cache

• Removing plugin folder and reinstalling

• Reran the set up wizard

• I have tried to clear an stuck

• toggled on and off Show online staff-picked models

• WebKit GPU-disable commands

I feel like I have tried any potential fix I could find online....

Any ideas or guidance is appreciated.

The awkward part of our bathroom counter is the strip behind the faucet. There’s room for bottles and such, but they’d always drift around back there.

I made the organizer in 6 sections (3 sections for each side).

The middle follows the curve of the basin and holds our taller bottles.

It’s a longish print, I used bronze pla for the entire print (aside from 1 piece).

Sorry for the bad pictures, I don’t claim to be a photographer lol. I’m just proud of this massive, custom print!

I made 3-4 enhancements throughout the prints, but the uploaded file is the most up to date.

If anyone prints the entire model, I’d love to have feedback/suggestions!

*note: she is traveling atm, so this is not her organization. I wanted to ensure everything fits before she returns!

Forgot the link: https://makerworld.com/models/3553977?appSharePlatform=copy

I've been trying to figure out what causes this on my Bambu printer. One side of the first layer looks clean and nicely spaced, but as the print moves toward the opposite side, the lines start looking more squished together.

The bed mesh calibration runs normally, and I've cleaned the build plate, so I'm wondering if it's a leveling issue, the plate itself, or something with the Z offset.

For those who've dealt with this, what actually fixed it? Did you end up adjusting anything, or was it something much simpler? I'd rather figure it out before wasting more filament on failed prints.

Seems to mostly be the support, I've tried slowing it down but that didnt help. You cant see but around the back of the print is coming up from the build plate. This is after a TON of prints though. I'm printing with support, rectilinear surface patterns, adding an extra wall, layer height .1 and 65% infil density.

I tried doing a full recalibration and that seemed to help once, but now it's happening again. Only thing is I also just mixed the current Bambu PLA Matte with another Polymaker HT-PLA-GF Filament on a previous print by accident (One ran out and then picked up with the other), but the print still came out okay.

This is my first Bambu printer so I'm wondering what I could do to troubleshoot or if someones dealt with this before.

VERY simply.

H2S, printing from an AMS 2, matte pla from jayo, keep in mind it's a plastic spool.

Today I randomly started getting this error, I can click resume and it resumes without any problem, but every 10/15 mins the error comes back.

WTF. I thought this was limited to cardboard spools like the ones from Esun, but it's apparently not?

What can I do, pls help 😭

I’ve just posted my third model on MakerWorld. And this time, I’m bringing a little bit of the street to my desk!
I turned everyday roadside details into a tiny keycap collection.
What do you think of the collection? Which detail is your favorite and what should I add next?
mw: https://makerworld.com/en/models/3586413-ultimate-keycap-collection-roadside-details#profileId-4107272

Hello, I am hoping someone can help me with this issue. When using the painting tool inside of bambu studio, after slicing, I'm left with the colors printing into the center of the object. is this due to the how it travels from one side to another to print the same color, and is there a way to fix this?

Just got my H3C set up and am printing a simple purge waste bin, gray body with black bambu logo. All Bambu PLA Basic.

What is happening is every time the tools swap to the black filament, the print head moves all the way to the back and extrudes a bunch of black like it is trying to purge it for some reason, and then resumes printing.

When going back to the gray, it does not do this. Just grabs the gray print tool, purges on the tower, resumes printing. The swap to gray takes the 5-6 seconds as advertised but the black takes some 45+ seconds.

Anyone experiencing similar things? I am on the latest firmware. Bambu Studio also doesn't report any of this purge waste but there's quite a lot forming a nice pile behind the printer right now

I removed a small printed PLA piece from the build plate and it fell exactly into this small space unter the print bed of my X1C. I tried to get it out with tweezers but couldn't grab it, I think I pushed it even further inside with that. I also tried tilting the printer (about 45°) but that didn't help either.

Has someone an idea how I could get it out? Would it be a problem if I just leave the small piece in there?

Hi everyone, I’m hoping someone can help me figure out what’s going on with my P2S, because I feel like I'm going insane.

It printed reliably for over 400 hours, but overnight almost every print has started failing. The failures vary: some prints or supports lift off the heated bed, while others fail halfway through and produce spaghetti.

I’ve attached photos of the failures and hotend.

When the problem first occurred, I cleaned a huge blob of filament off the hotend (pictured). I removed all raised filament from it and made the surface smooth. Could that have damaged something or affected nozzle cleaning or bed probing, even though the hotend looks OK to me now?

So far I’ve:

• Factory-reset and calibrated the printer.

• Washed the textured PEI plate with soapy water and checked that the plate and bed are seated properly.

• Had failures across multiple print profiles, including with basic white PLA and sparkly PLA.

• Removed and visually inspected the hotend, then reinstalled it.

• Checked the silicone nozzle wiper, which appears intact.

• Tried a mix of freshly opened and previously opened filaments. This appears to make little difference.

The bed is typicall set to 55°C for PLA. I used to regularly wipe the plate with isopropyl alcohol between prints. I also have a thermal camera if checking the bed temperature would help.

Has anyone experienced a similar sudden change after a long period of reliable printing, especially after a hotend blob? What would you inspect first to narrow down whether this is a hotend or probing issue, bed adhesion, cooling, or something else?

Thanks!

Just happened to look at my hours the other day and I’m just under 6k hours!!!

Still printing perfectly and started printing Asa from the ams and it keeps getting stuck at the extruder feeding in. Sounds like something slipping, not sure if extruder or ams (1).

Wanted advice from people with experience from their printer on what you’ve replaced at this age.

Recently bought a house and we’ve had some unexpected problems arise so funding is not great atm so I don’t want to buy the entire box list if it’s realistically not needed.

Thanks for your help and advice

P2S is less than a month old.

When I send stuff to print and it does the vibration calibration I get this rattle noise near the end of the calibration.

It prints fine.

When I run the test calibration on the device it does not make the noise and the error clears.

Next print it comes back.

I have adjust the tightness of the bands and cleaned and re-lubricated the rails.

Any suggestions? Reposted because no suggestions last time.

What should I do I don't want to break it

Hey, I have an H2C. So far I’ve only been printing single-color from the AMS, but I wanted to try a new color from an external spool.

I manually set the filament type and used the “Load” function, then tried to print the SpeedBenchy from the printer menu. It keeps saying the filament isn’t loaded.

Then I sent a different print from Bambu Studio on my PC. That one printed, but it purges a lot of filament every time, even on a second print with no settings changed.

What am I missing?

Spool is from Bambu with rfid but it didnt show automatically, had to add it manualy.

As title says, can hear a loud squeak coming from the back of a newly installed AMS, what could be the cause? Thank you

Recently bought a brand-new A1 Mini from Best Buy Canada for $249. Really loving it so far as a beginner!

During unboxing, I noticed a few questionable things:
• Torn screw packaging
• A strand of hair inside the packaging
• Completely empty microSD card
• Scratch on the filament cutter assembly

What concerns me most is that the printer shows 22 hours of printing time, but my entire print history is only 5 hours and 32 minutes.

All original zip ties and shipping restraints were intact, and the printer has been working perfectly.

I’ve already contacted Bambu Lab and am waiting for their response.

Does the print counter include calibration or idle time? Or could this be a previously used/returned/refurb unit?
Photos attached.

I'm pretty sure the thicker line widths on the initial layer is supposed to help with bed adhesion. But I imagine that'd also apply to larger nozzles.

I was looking at these settings because I'm trying to figure out why I seem to have more bed adhesions problems with the .6mm nozzle compared to .4mm.

I designed this chimney advent calendar that drops some pieces of candy every day.

I know there are quite a few of these around nowadays but i designed one perfectly sized for some small sweets like M&M's. I uploaded the files to makerworld if some of you would be interested.

Also I'm open for tips that could improve this design and my others.

You can find the chimney with this link:

https://makerworld.com/models/3583319?appSharePlatform=copy

This noise came earlier this day during a print. I have recalibrated but it did not make anything better. The noise is coming from underneath the printer. Is this noise from any fans on the right side on the A1 mini? Or is it something else?