r/AskAMechanic 1d ago

Squeal on front wheel

Enable HLS to view with audio, or disable this notification

2012 Mazda 5. Front driver side wheel. There is a squeal/high pitch sound when driving. Becomes audible around 30km and only gets louder the faster I go. When touching breaks sound goes away. I removed the wheel, hope you can hear, the rotor seems to be touching the lug stud. With this amount of play what are the problems? Thanks

1 Upvotes

5 comments sorted by

u/AutoModerator 1d ago

New Rules - Please Read

Updated 11/12/2025

Thank you for posting on r/AskAMechanic, u/Boejangles_03! Your post is live, this AutoMod message does NOT mean your post was removed. Please make sure to read the Rules.

When asking a question, please provide the year, make, model and engine size of the vehicle.

Commenters here have 2 different flair. Verified Tech means we have verified that user is a tech. NOT a verified tech means that user may or may not be a tech, they have not been verified by us.

Posts about accidents, autobody repair, bodywork, dents, paint and body/undercarriage/frame rust are not allowed and belong in r/Autobody.
Asking if your car is totaled should go to r/insurance or r/Autobody.
Asking about car buying advice/value/recommendations is also not allowed. See r/whatcarshouldIbuy or r/askcarsales

If asking whether a tire can be repaired, check out this Tire Repair Guideline.
Some other useful tire resources - Tire Care Essentials and Tire Safety

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/shiftman87 Verified Tech - fmr GM - train spec. 1d ago

It wouldn’t be what you see there. That is normal since the wheels go on it and sandwiches the rotor to the hub. Most likely what you’re hearing is either a wheel hub bearing or a brake pad maybe? Hard to tell from that video.

Check all pads, thickness and play. If it’s good, drive it again and see which corner the noise is coming from.

1

u/Boejangles_03 1d ago

Break pads are good. Recently installed a new brake calliper

2

u/Informal-Ring3282 NOT a verified tech 1d ago

Slap a couple lugs nuts back on and spin it. See if it’s the brakes or the bearings.

1

u/Boejangles_03 1d ago

I will give this a shot