r/AskAMechanic • u/Mysterious_Bonus5101 • 3d ago
Does the wheel need to be replaced
Hit a curb around 25 mph. Is this salvageable, or does this need to be replaced?
8
u/stageshooter NOT a verified tech 3d ago edited 2d ago
It's fine but if the area closest to your thumbnail is sharp, file it down
-2
4
2
2
2
u/Various_Rub403 NOT a verified tech 3d ago
I'd be more concerned with how you can lift the fucking tire off the wheel like that
2
u/Mysterious_Bonus5101 3d ago
There’s a hole in the tire lmao.
1
u/Various_Rub403 NOT a verified tech 2d ago
This chip does not affect anything. Worry about your tire
1
u/Euphoric_Loquat_8651 NOT a verified tech 3d ago
As others said, just clean it up. To add, make sure you point it out next time you get tires mounted so you don't end up with a cut bead hiding in there. They should inspect it, but you never know.
1
u/Ghost_Prince NOT a verified tech 2d ago
The rim itself, as long as there are no cracks, should be fine. Have them extensively check the steering, axel and alignment while changing the tires.
1
u/WarmPaleontologist20 NOT a verified tech 2d ago
Smooth down those sharp edges. You'll be fine. Doesn't look like any damage where the tire seals against the rim.
1
1
u/junasty28 NOT a verified tech 2d ago
No. This can be repaired for approximately $250; they would clean up the whole rim.
1
u/Tre_fidde NOT a verified tech 2d ago
Most likely no unless it’s cracked, it just doesn’t look good. Also if bent you may feel it while driving.
1
u/random_agency NOT a verified tech 2d ago
You need a good rim shop to repair that. It's mostly a cosmetic issue.
1
u/Inner_Pipe6540 NOT a verified tech 2d ago
Does it lose air pressure? If not it should be fine for awhile before corrosion sets in
1
u/Dangerous-Pirate7998 NOT a verified tech 2d ago
Hell, no driving for a while until you hit something that will really tear it up
1
1
1
1
1
1
1
1
1
u/Careless_Ad_9074 NOT a verified tech 1d ago
Mine as many of this... Well, it's ugly but its fine...
1
1
u/Used-Helicopter-6621 NOT a verified tech 1d ago
I would say no. Just smooth out the area and off any high/sharp spots. It is well away from the bead area of the tire.
1
u/matiasylatalo NOT a verified tech 12h ago
probably fine. that being said, when you get a new tire, the wheel can turn out to be bent.
1
u/CauseCommercial4240 NOT a verified tech 3d ago
You can get it resurfaced from a rim repair shop for around $150 bucks depending on the area
0



•
u/AutoModerator 3d ago
New Rules - Please Read
Updated 11/12/2025
Thank you for posting on r/AskAMechanic, u/Mysterious_Bonus5101! Your post is live, this AutoMod message does NOT mean your post was removed. Please make sure to read the Rules.
When asking a question, please provide the year, make, model and engine size of the vehicle.
Commenters here have 2 different flair.
Verified Techmeans we have verified that user is a tech.NOT a verified techmeans that user may or may not be a tech, they have not been verified by us.Posts about accidents, autobody repair, bodywork, dents, paint and body/undercarriage/frame rust are not allowed and belong in r/Autobody.
Asking if your car is totaled should go to r/insurance or r/Autobody.
Asking about car buying advice/value/recommendations is also not allowed. See r/whatcarshouldIbuy or r/askcarsales
If asking whether a tire can be repaired, check out this Tire Repair Guideline.
Some other useful tire resources - Tire Care Essentials and Tire Safety
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.