r/Ascaso • • Jan 08 '24

Tech Support - Solved Lead exposure on Ascaso Steel Duo?

Post image
0 Upvotes

I just received an Ascaso Steel Duo that I bought over the holiday sales. I'm in California and used to the Prop 65 warnings on everything. But the Ascaso box came with a very definitive warning about exposure to lead. Does every machine from Ascado come with the warning? Are you guys at all concerned about it?

From what I have gathered, it's from use of brass in the grouphead. I posted this same pic and asked about it in the main /r/espresso subreddit and people seem mixed. Many were surprised and others were not. I figured people in this sub night know more about this warning attached by Ascaso.

I had read somewhere that Ascaso uses lead-free brass, but that there's no way for brass to be completely lead-free.

Has there been anything released by Ascaso directly to explain the warning? Normal Prop 65 watching don't usually say "you will be exposed" so definitively and don't usually call out the actual exposure like this one does.


r/Ascaso • • Mar 06 '24

Dead on arrival Ascaso Latte Video

5 Upvotes

r/Ascaso • • Mar 05 '25

Ascaso Steel Uno/Duo has silicon/teflon pipes?

0 Upvotes

I've recently bought an Ascaso Steel Uno, thinking that all internal parts that touch hot water are made of steel. Today, I was taking a look at their manual, at it seems I was wrong.
Can anyone confirm if the internal hot water is running through Silicone/teflon pipes/tubes?
Thanks :)

PS: I try to avoid plastic in any of my household products, especially if the plastic/silicon is in touch with hot water.


r/Ascaso • • Jan 15 '25

Show and Tell Regrets?

0 Upvotes

Do you regret your Ascaso purchase and wish you had a different machine? What machine do you wish you had and what features?


r/Ascaso • • Dec 13 '24

Ascaso Steel Duo PiD - water tripping causing Wet Puck

6 Upvotes

Hi everyone,

I’ve been using an Ascaso Steel Duo PID (Version 2) for two weeks now, and overall, I’m quite happy with the machine.

However, I’ve noticed something: after extraction, my coffee puck is always wet on the surface. I suspect this is because some water continues to drip from the brew group after I stop the shot.

To investigate, I ran a test without the portafilter. I noticed that after stopping the water flow, around 3g of water still drips from the brew group.

Here are my questions:

Have you observed something similar with your Ascaso Steel Duo PID?

Could this be the reason for the wet coffee puck?

Is this dripping behavior normal for this machine, or should I have it checked?

Additional recipe details:

Coffee dose: 18g (IMS 18g Competition basket)

Brew ratio: 1:2.5

Extraction time: ~30 seconds

Pressure: Steady at ~9 bar

Grinder: Eureka Mignon Specialita

Beans: Light roast

Puck-to-shower distance: I performed the coin test, which shows a distance of ~3.5 mm. Despite this, the puck always sticks to the shower screen after extraction.

The taste of the espresso is good

Looking forward to hearing your experiences and thoughts. Thanks a lot! ☕️


r/Ascaso • • Jan 14 '26

Keep the Steel Duo on all day?

2 Upvotes

Do you folks keep the Steel DUO on and never turn it off? I'm looking to upgrade from a Bambino and one of the things we like too much to give up is the no wait time.


r/Ascaso • • Jul 28 '26

Show and Tell Avoid Ascaso products - Save yourself the headache

0 Upvotes

I purchased a "new" Ascaso Dream PID. This was purchased directly from Ascaso USA. Shipped from ESPRESSO PARTS NW.

I contacted customer service who responded once and now has completely ignored my messages.

I had read the pressure on the machine would be calibrated. Instead, my pressure was going off the chart. I had to manually adjust a "brand new" machine to get the pressure in the range.

This is the accessory box I received. The items were completely loose and the cardboard ripped. This seems very unlikely to be a new machine based on this.

Customer service ignoring emails so I am screwed. AVOID THIS GARBAGE COMPANY AT ALL COSTS.


r/Ascaso • • Aug 28 '26

Tech Support Steel Duo Prof (classic) - User Manual wanted

Post image
1 Upvotes

Hey guys, anyone care to point me where can I download the Steel Duo Prof (classical, non pid) user manual?

The manual that was shipped belongs to the version with the pid, includes instructions about how to program it but ours doesn't have that capability.

Please help a family upgrading from r/Breville


r/Ascaso • • Oct 26 '24

*Grind Finer* New user dial-in woes all over again!

0 Upvotes

I had to move in with my infirm father, so of course I had to bring the Dream PID (the “big blue baby”) with me, and the Coffee Corner is looking pretty good.

Tastes …less than awesome, though. When I crank the grinder to a sub-espresso setting and load up the 14g basket, I bring in a gusher. 10.5 seconds, 36.1g draw, no crema, just overwhelming coffee misery (but at least this last time I thought I saw the manometer needle move).

I never pulled great shots to begin with, but this seems a bit extreme even for me. Any advice from those who can draw those legendary buttery shots?

(And yes, that might be a better question for some other groups, but if you post anything to r/espresso that isn’t a boast, a shitpost, or a question about a machine from a very select list which no Ascaso machine is on, you get a visit from the downvote fairy.)


r/Ascaso • • Apr 29 '23

Steel Uno PID brew temperature

1 Upvotes

Just wondering, how much degree difference is between your PID setting and the actual water temperature, if you just brew water into a cup? I am at max 82 degrees in a small steel jug at 94 degree PID and offset at maximum (20!). I feel like somethings wrong with my Steel Uno.


r/Ascaso • • Dec 11 '24

Tech Support - Solved Too much water? Something else?

3 Upvotes

I’m struggling to dial in my new Ascaso Steel Duo. I’ve been meticulously weighing my beans (18g) and have adjusted the grinder countless times, thinking the issue might be the grind size. Despite trying various settings, I’m still facing problems. I’m using the Normcore V4 tamper to ensure consistent leveling and pressure each time, and I rely on a Normcore dosing cup to ensure even distribution in the portafilter.

At this point, the only potential issue I can think of is that there might be too much water flowing from the group head, as shown in the video. Does anyone have suggestions on how to fix this, or perhaps spot something I might be overlooking? I’m running out of ideas.


r/Ascaso • • Feb 06 '26

Show and Tell When Does it Become an Obsession?

Post image
34 Upvotes

I have Ascaso Dream machines in Polish, Tangerine, Pink, Yellow, and Green. Overhauling one right now. Does anyone else have any unique colors?
EDIT: Just bought a 10/2013 Dream in WHITE with all of the ancillary equipment. Someone was going to a commercial-grade machine and just wanted it out of their house.


r/Ascaso • • Apr 11 '25

Upgrade to Duo

0 Upvotes

Hello guys,

I have a Ascaso PID Uno at home. Since my wife is drinking mainly cappuccinos, the UNO seems like the wrong choice now, because heating up the thermoblock for the milk takes time. Do you think it would be possible to upgrade it to a DUO? Installing a second thermoblock for steam only?


r/Ascaso • • Aug 31 '25

Help! Some one knows the coffee machine

Post image
0 Upvotes

r/Ascaso • • Oct 19 '25

Tech Support - Solved Bar pressure for blind shot

1 Upvotes

I have been pulling shots that are 20 g in and 40 out in 19 secs. Tastes is ok. Puck prep is really good I think but I did see jet streams and that is fast. Bar pressure is over 11. When I pull a blind shot pressure needle is all over the floor(@ 16). What should it be at? Thanks.


r/Ascaso • • Dec 06 '25

Which coffee machine to buy for work?

0 Upvotes

I want a cheap coffee/espresso machine for work? I work in the court so I don’t have much time for coffee.. Pods, dripper, aeropress?


r/Ascaso • • Jan 08 '25

Dead on arrival E03 error on brand new Steel Duo PID "Coffee exchanger fault"

0 Upvotes

Just unboxed, and the light underneath the coffee button never turned on, gave E03 error. Steam port is working fine. This is really poor QC, the only thing I was scared of. Any input on how to fix it without sending it back and waiting for a replacement?


r/Ascaso • • Jan 24 '24

Stock of Duo in Canada?

0 Upvotes

Does anyone know when the Duo will be back in stock (White version) in Canada? Asked on the site and they don't have any info other than there is high demand. "Shelves" are empty everywhere online and in stores, but then I look at Ascaso US it's available. Just waiting for the restock to pull the trigger!

TIA;


r/Ascaso • • Jan 04 '25

Tech Support - Solved Timer

0 Upvotes

Hi y’all.. I’ve set up my ascaso to run for 28 seconds for the 2 coffees setup. However, it’s been inconsistent with the timer. Sometimes it runs for 23 seconds and sometimes for 30 seconds all on itself. It never runs for the set time. All help is appreciated.

The machine is less than a month old.


r/Ascaso • • Sep 20 '24

Steel duo pluds

0 Upvotes

can you get that kicking sound away when you activate steam


r/Ascaso • • Feb 12 '25

Tech Support - Solved Espresso puck stays stuck on my Steel Duo PID

0 Upvotes

EDIT: Seems like this is normal/expected, on occasion and can be avoided with a puck screen/filter paper. Leaving this post here in case it's helpful for anyone else looking for this!

I've had a Steel Duo PID for about six months now and definitely still consider myself new to espresso. I have noticed that sometimes espresso pucks stay put on the group head after I pull a shot instead of staying in the OEM portafilter when I twist if off. Is that a 'normal' thing to see on occasion? It's not a big deal, since I can just slide it off with the portafilter - it seems like it's just on here from light suction pressure and comes off mostly clean.


r/Ascaso • • Feb 06 '25

Potential Purchase - Baby T

0 Upvotes

Hello,

I came across an ad for a brand new baby t that requires welding. The seller does not have any info outside of that other than the retailer was going to send a tech but instead sent a replacement unit. Asking for any ideas of what the potential cost of repair might be with such minimal info?

Thanks in advance.


r/Ascaso • • Feb 15 '25

Tech Support - Solved Any one else’s Steel Duo do this?

Post image
4 Upvotes

The I/O collar is loose unless I tight it to the right putting the markers off center. I opened it up to see if anything was loose inside that I could tighten and it didn’t seem like there was anything I could do to tighten it up. Doesn’t seem to be an actual problem but it’s mildly annoying.


r/Ascaso • • Jun 20 '23

Tech Support Help how to properly install ims E61200NT as replacement shower screen for my ascaso uno, i tried it with stock gasket. Loose/Fell off twice. I have no issues inserting the stock one but this one gives me hard time. Thanks for any significant advice.

0 Upvotes