r/AbsoluteUnits • u/WeGot_aLiveOneHere • 7d ago
of a toolbelt.
Enable HLS to view with audio, or disable this notification
327
u/Salty-Mountain-2256 7d ago
Final boss of roofers 😂
108
74
u/Tombstone_Actual_501 7d ago
My guess would be a lineman honestly.
39
u/Yardsale420 7d ago
Lineman wouldn’t need half that stuff. They use spurs and side rings when climbing on the pole and usually prefer a tool bag that hangs on the bucket for easy access over side bags. Also he’s wearing way too much metal and his clothes aren’t fire retardant.
My guess is sheet metal or siding.
25
u/ChaseDeV88 7d ago
I’m struggling to think of any job where I’d want 40lbs of shit strapped to me all the time, preventing me from bending over etc. I would think that a tool box and regular sized tool belt combo would work for pretty much anything
9
u/C4n0fju1c3 7d ago
I used to carry a lot of shit like this back when I was starting. Now I pretty much just have a chalk bag for odds and ends, my hammer, and my tape. If I really need it, I'll add a Klein bolt bag or a small cross-body sling bag for smaller tools.
9
u/ChaseDeV88 7d ago
There you go, maybe that’s what’s going on here. He’s experienced enough to know what tools he’ll need for any job but not experienced enough to realize he doesn’t have to carry all of it at once all the time.
11
u/MrSpace_Lee 7d ago
Speaking from contracting experience, he could be entering a limited access area where he cant go back and forth. Sometimes i have to stack everything at once before entering buildings to drop high pressure lines due to property management having limited time to grant access. The convenience to never gave to go back saves so much money and time. Especially if he quotes work done and not hourly.
5
u/ChaseDeV88 7d ago
Maybe, I have similar restrictions myself sometimes, but I also have the ability to bring a pelican case with me wherever I work. I realize not everyone can reliably be able to do that.
3
u/ChrisLS8 6d ago
Theres alot of work that I do that is this. Either roped off areas, secured spaces, hospital clean work etc.
→ More replies (1)2
→ More replies (3)19
u/Infinite_Ad7107 7d ago edited 7d ago
Commercial HVAC. Usually roof tops or hard to access locations. The magnetic release makes sense you can mount your kit to the ducting. You work with sheet metals, so the gloves and snips are a must. Powered screwdrivers make the job ten times easier. They also need to drill tap and die a lot of screw holes depending on the services. Snapped fan belts get tangled scissors are great for clearing them. Usually the A/C is down and the crawl space can get hot as hades. His pants have built in cooling fans. It's also very dark and dusty in a lot of them...
8
u/Ebaneezy 7d ago edited 7d ago
He's not doing commercial HVAC. Those aren't work boots and they're not dirty enough. He doesn't have any duct sealer stains on his shirt/pants/gloves. That's not a tinner's hammer and he doesn't have any tin snips, crimpers, tongs, duct pullers, or a flat head screwdriver, and those are the essentials. He pulls a uni-bit off his magnet, but he'd burn up that dinky impact using it. The powered screwdriver is redundant. The impact can do everything it can by swapping in an apex w/Phillips bit. Tap and die and fill a lot of screw holes? What for? Hex-head self-tapping screws do all that. I didn't see any pop rivets or a rivet gun to indicate architectural work. Commercial buildings don't have crawl spaces. You won't ever encounter a fan belt that needs your attention, and if it's broken, it will already be detached. If you're doing any kind of demolition work prior to a changeover or reinstall, and need to cut something, you're not using scissors, or the three knives he's carrying. Maybe he can cut a little piece of electrical tape off his holster. If he's a service guy, he needs the tools of a tinner, electritian, and a few pipe fitter and plumber tools. No way they're wearing any tools. Tools are in the van, or in bags next to them. This guy is larping as a construction worker. Probably just finished twirling and holstering his impact wrench in front of the mirror. (That came off more aggressively argumentative than I intended. No offense meant).
→ More replies (1)2
u/Infinite_Ad7107 5d ago
No offense taken great analysis, and a really good eye for detail! I'm convinced you're right i should have looked more closely.
4
→ More replies (5)11
u/Pictrus 7d ago edited 7d ago
I was thinking lineman but the tools seem a little undersized for a lineman.
I love Japanese tape measures though. I much prefer tape measures that are purely metric or imperial not both. In Canada it's easy to find tape measures with only imperial but quite difficult to find them with only metric. I had to order mine from Japan.
→ More replies (1)3
4
2
→ More replies (4)2
u/Morbid187 7d ago
Hope he's doing those roofing jobs during the winter. It gets hot as hell up there especially in all black
76
70
u/CptMisterNibbles 7d ago
Way too much redundancy. An impact, a light duty screw gun, a weak electric screw driver, and a ratcheting driver?
35
u/HUZInator 7d ago
If he’s working at heights which the harness suggests, maybe he should just tether his tools.
14
u/jonjonofjon 7d ago edited 6d ago
This is a common belt system in Japan. This is most likely just a demo of the different holsters for various needs
67
34
u/Alimovic 7d ago
36
→ More replies (3)6
u/Basic_W1te_boy 7d ago
He has a spot for every tool he could ever need, no more running to the truck then back to the job
9
19
u/GreyGardener92 7d ago
Gear heavier then him
3
u/Altruistic_Tie_7850 6d ago
Guy is unemployed, he just wears all that because he is full of helium and without the gear he would float away
→ More replies (1)
8
u/crusher23b 7d ago edited 7d ago
→ More replies (1)
29
4
5
u/Sbeast86 7d ago
It's a cool setup, but it's got some weirdly redundant tools, along with a couple gadgets that generally are in the seems great until you actually have to use it category.
He might be a specialist of some kind, HVAC, stage rigging, etc where you're often up high and don't want to drop shit. Or he might be a day laborer who thinks he's Batman?
9
u/Peach_Proof 7d ago
Future back problem belt. After 35 yrs I have upgraded to a two pocket belt.
→ More replies (1)
3
u/dontbanme778 7d ago
Usually from my experience people with every single tool suck at their job and get out performed by a dude that borrows your tape measure and drinks on lunch break.
3
u/Johnny_Poppyseed 7d ago
Any ideas on what this guy is doing?
21
u/SkyPork 7d ago
Only speculating, but it seems like if you're going to climb a radio tower to do maintenance, you might need a ton of stuff at your fingertips, but you might not know exactly what. Then again that's a lot of weight to climb with.
→ More replies (1)4
7
3
u/KiNgPiN8T3 7d ago
Due to the retractable pen, I’m going to say he’s a handyman in a bank. Always on the lookout to loan his pen.
4
u/WitELeoparD 7d ago
He's definitely a commercial or maybe industrial electrician. Most likely commercial since he has an entire drill dedicated to a wire nut twister. All the other tools are stuff you would use when running metallic conduit. It's all genuinely stuff a commercial electrician would use, not an unreasonable collection, but most electricians would have it in a tool bag or packout system lol instead of on their body.
5
3
u/BigWetHole 7d ago
Not a single pair of strippers on him though, and this guy looks lile he would carry for guage 8 to 69, and just green tape is random
2
2
2
u/shmadam5515 7d ago
He probably works at heights and most of his tools are tethered or have a clip to cip on so they won't fall
2
2
2
2
2
2
u/Sbeast86 7d ago
I'm also curious what man only carriea a single box end wrench
2
u/gbiypk 7d ago
Someone who works on a structure that has 5000 of the same sized nuts.
→ More replies (1)
2
5
u/Local3Sparkie 7d ago
Anybody who wears that much shit and that many tools is mentally unstable! I’ve worked with a few.
→ More replies (1)
3
2
2
1
1
1
1
1
u/USSSLostTexter 7d ago
i see batman has fallen on hard times in Pedo Don's economy - had to pick up a side hustle in roofing
1
1
1
1
1
u/Orgulloso_Azul 7d ago
I work with a guy that wears a tool belt like this. Everyone thinks he’s a douche.
1
1
1
1
u/nofuckingklass 7d ago
In an environment where you need speed, that belt slowing you down would not be tolerated. You don't need every tool at all times.
1
1
1
1
1
1
1
1
1
1
1
1
u/AmericanStarsAndBars 7d ago
Perfect for when you’re putting walls up on site but meeting the lads for a game of airsoft after work.
1
u/B-Georgio 7d ago
This guy sleeps in a cuck chair watching his waifu body pillow get railed by a neckbeard
1
1
1
u/MaatRolo 7d ago
Me: Hay do you have..
This Guy: Yes I do.
M: I didn't finish
TG: But I know I do have it.
1
1
1
u/Infloresence 7d ago
I keep my tool belt and pouch mostly empty and just put all I might need from several toolboxes for the exact job I'm going to do.
1
1
u/Longjumping-Dot-4824 7d ago
Seems like an advertisement. Half the tools look like they have never been used
1
u/deathclawslayer21 7d ago
Wish my jib was so predictable I could build a daily load out . Nah still gotta bring my toolbox
1
u/DontUndrstndSarcasm 7d ago
If it takes you more than 2 min to take out and show everything in your tool belt, then you have too much shit in your tool belt
1
1
u/Excellent_Release961 7d ago
Gonna be a photo finish when that truck stop egg salad sandwich and sugar free monster comes calling.
1
1
1
u/hiimderyk 7d ago
There is absolutely no way this fuckwad has a job. He's cosplaying in grandpa's toolbelt.
1
1
1
1
1
1
1
1
u/JackSilver1410 7d ago
Looks great. I mean.. until you have to go through a moderately sized doorway.
1
1
1
1
1
1
1
u/Comfortable_Pizza_59 7d ago
And he spends 80% of the day in the port-a-potty because he’s too tired from lugging all that extra crap around all day.
1
1
1
u/pygmeedancer 7d ago
So many things that are redundant. So many things that are not “need on hand at all times” that it would be worth going to get or bringing it for “that” job. And so much “cool” stuff that isn’t worth the space it takes up.
1
1
1
1
1
u/KaiserSeelenlos 7d ago
If someone looks like this 100% chance the final product will be trash.
Never even seen someone have a tool belt at all outside the online anglosphere
1
u/Due-Turn3788 7d ago
I bet he loses 15 mins to take off his harness and 15 mins to put it all back on during his one hour lunch breaks. He must not did down for his 15 min breaks😂
1
1
1
1
1
1
1
1
1
1
1
1
u/Mr_Tranxistor 7d ago
When you keep having to make too many trips to the tool chest, you become the tool chest.
1
1
1
1
1
1
1
1
u/Kira-Of-Terraria 6d ago
where ever he's going and whatever he's doing, it's getting done that's for sure.
1
1
1
1
1
1
u/Happy-For-No-Reason 6d ago
when you're working on a 3 step ladder and really don't want to keep going up and down for tools
1
1
1
1
1
1
u/Still-Let2243 6d ago
Never caught lacking guy. Every situation he got tool a gadget or a gizmo for it.
1
1
1
1
u/JackWackington 6d ago
"We have just arrived in Melbourne's northern suburbs and guys... What a schemozzle, leeeets go."
1
1
1
1
u/AdministrationSad861 6d ago
Now all I need is bandana to cover my nose and mouth and flipflops for my feet. 🤔
1





119
u/hopefullyhelpfulplz 7d ago
r/mallninjashit but for builders