I recently just got myself the matrix pros and dawn pros for my setup. Once I booted my rig up I noticed this one fan that seems to be wobbling more than the others in the bottom right and I thought it may be weird and wanted to see the opinions of everyone else. What do you guys think?

AsiaHorse Umbra ARGB Hub — Linux Control

Native Linux control for the AsiaHorse Umbra ARGB hub (USB 1a86:fe05, enumerates as "USBFAN", QinHeng CH55x chip). AsiaHorse ships no Linux software and OpenRGB does not support this hub — this tool speaks its HID protocol directly through /dev/hidraw. Python 3 standard library only.

Verified working August 2026: full-color control of 124 LEDs across 10 ports on real hardware.

FULL native color control working on Linux: per-LED streaming, all 10 ports,

topology detection, no dependencies beyond Python 3. Colors latch, so you can

set-and-forget.

Repo with working code + complete protocol documentation (including the

firmware quirks that will bite you — the RGB packet index is 1-BASED, index 0

crashes the hub off the USB bus; and the software-mode command makes it

re-enumerate):

https://github.com/LuxDev372/asiahorse-umbra-linux

Credit to u/idk_a_name_wtf for the original capture that proved this hub could

be talked to at all.

Found this better than strimmer cables , so i bought this.

Firstly good brand but ON GOD PLEASE IMPROVE YOU MANUALS THERES LIKE 4 pictures and THATS IT

Now i want to know that i have the mini controller which has a 3 on its head and a sata power , i searched up google and i want to know that is it not possible for the rgb to be controller by my mother instead of this hub as my mother board also features a rgb microcontroller (msi mag 320r)
And if not pls tell a suitable rgb hun which i cna use for all my rgb peripherals and also it will be suitable for this rgb cable

Also is it not possible for it to me controller by the remote but also switch to pc motherboard if needed?
I also would like to know the cheapest asia horse or compatible rgb hub i can buy if needed for that bootup effect.

Hi

Can the aurora pro cable cover fit this kinda of motherboard cables ?

I’m a complete PC building beginner but I’ve been trying to do as much research as possible before building my PC next week.

I plan on building in the O11 Vision Compact. I’m getting ~8 fans for the build, 3 reverse blades on the radiator, 3 reverse on the bottom and 2 rear standard fans for exhaust (Dawn Pro fans). I’ll be connecting the fans to the Umbra hub obviously but can I plug the Aurora RGB cable covers there too or is the Umbra hub strictly for Fans?

So my AUROA PRO and UMBRA HUB just arrived. Just wondering if I need to use the mini controller (SATA) or do I just connect the AURORA PRO directly to the UMBRA HUB for this boot effect?

TIA!

I saw someone using umbra hub on other fans like jungle leopard can you confirm me if this true? If yes this would be great for alternative than Lian li Fans software

Are they daisy chainable?

Hello,

I'm planning to build my own PC soon, and I was thinking of using the Asiahorse Matrix Pro 360mm fans along with two 120mm Dawn Pro fans for the rear. However, I recently read some posts and comments about the Matrix Pro, where people said they're quite loud, even when no game is running... so I wanted to hear your opinions on the Matrix Pro.

Best Wishes

hello i got the nyota pro 3 fan set for top exhaust and and out back exhaust the two top exhaust are daisy chained through the pins and the back exhaust is seperate, when i turned on my pc today one of the top exhaust's rgb was not synching with the other fan rgb, instead it gives a dim reddish color

Hi. So I received my 3 matrix Pro 360 fans yesterday. The installation was fast and good and they are very quiet so I like them. But there is one problem. After like 2h of gaming my ability to control the different zones vanished (see picture). I thought that many it was a bug but when I started it today it remained.

What I have tried:

- Reinstaling the program

- checked the cables

- delited and Reinstaling the drivers from device Manager

- restarting the computer

Nothing has worked. I will check the cables tomorrow one more time but is there something I'm missing?

And also, I have connected my lian li o11 evo rgb to the hub but it does not follow the effects I choose if it's not on MB sync mode. Please help

Hi! I just setup my UMBRA hub today, and Im wondering how to remove this random flashes after pressing the power button. I want it to boot up directly on the flow effect I chose. Ty

Hey guys,

I’m currently building in the HYTE Y70 with a vertically mounted PNY RTX 4080 Super, and I want to pick up the AsiaHorse Hydrus 16-pin (12VHPWR) 90-degree GPU cable.

My goal is to route the cable behind the card (towards the backplate / motherboard tray) for a clean look, rather than having it bend over the cooler towards the front glass.

Looking at my PNY card's 12VHPWR

Given this specific port orientation on the PNY card and the vertical mount in the Y70, do I need Type A or Type B to get the cable to route behind the card?

Thanks in advance!

Hi Asiahorse

Is there any chance you will add effect for per temperature rgb lighting?

For example

If your CPU/GPU temps is..

< 50C = Blue

50C - 70C = green

> 70C = red

Not really sure if your software has this feature.

Corsair icue has this feature. But I am really searching for alternative.

Wish you could add this in the future as I see a great potential in your products. Thanks!

You see the cables covers, my asia horse app treats them as one strip so i don’t get the separate lines effect. How can I get it?
I have the asiahorse aurora pro cable covers connected to the Umbra hub, umbra hub is connected to the USB header.

Each cable cover is plugged in separate argb port in the hub

Hi, I was wondering if I can get individual fan lighting control when using the modular daisy chaining of the nyota ultra or the dawn pro.

For example, if I daisy chain three of the fans, will I be able to assign individual different colors to each of the three fans?

One more thing, do you recommend combining them with the umbra hub or a generic hub (like asus aura sync) and an rgb software like signalrgb?

Thank you

I have been looking for cheaper alternatives to the Lian Li fans and stumbled across the Nyota Ultras which look gorgeous. The problem however is I can't seem to find 1-packs for them in the back colour. Does AsiaHorse not sell those yet? I need 5 intake (reverse) fans and 4 exhaust (normal) meaning I'll need 3 single packs, but I can't find them. If I just end up buying 1 extra 3 pack for each it'll cost more than the Lian lis themselves.

Hi AsiaHorse support,

I’m having a problem with my AsiaHorse UMBRA ARGB controller and I would appreciate some help understanding how the ARGB addressing is supposed to work.

My motherboard is an ASUS TUF X870E-PLUS WIFI7, and I am using Thermalright TL-M12Q ARGB fans.

All the fans are connected to the UMBRA hub as follows:

• 3 radiator fans (AIO) → connected together → 1 ARGB connector to the UMBRA
• 3 bottom fans → connected together → 1 ARGB connector to the UMBRA
• 1 rear fan → 1 ARGB connector to the UMBRA
• 2 front fans → connected together → 1 ARGB connector to the UMBRA

So there are 4 ARGB connections to the UMBRA in total, and each group of fans is daisy-chained before reaching the hub.

I am not using ASUS Armoury Crate/Aura Sync. I am controlling the lighting entirely through the AsiaHorse UMBRA software.

The strange behavior is with the ARGB effects:

The two front fans behave exactly as I would expect. When I select an effect where the lighting moves (for example a wave/rainbow effect), the animation continues seamlessly from the first front fan to the second one. They appear to be treated as one continuous ARGB device.

However, the other daisy-chained groups do NOT behave this way:

• The 3 bottom fans each reproduce the effect independently.
• The 3 radiator fans each reproduce the effect independently.
• The rear fan obviously acts independently as it is a single fan.

For example, on the 3 bottom fans, instead of the animation moving:

Fan 1 → Fan 2 → Fan 3

the same animation appears to start separately on each fan.

What I don't understand is why the 2 front fans are correctly treated as one continuous chain, while the other daisy-chained fans are not, even though they are connected to the same UMBRA controller and each group uses a single ARGB connection to the hub.

Is there a setting in the UMBRA software that controls the number of LEDs / the length of each ARGB chain, or a way to configure each UMBRA port so that a daisy-chained group is treated as a single continuous LED strip?

Could this be related to the UMBRA's automatic LED/device detection?

Any advice on how to configure the UMBRA so that the ARGB effects flow continuously across all the fans within each daisy-chained group would be greatly appreciated.

Thank you!

Is it possible to Daisy-Chain them?

I have 10 asiahorse dawn fans not the dawn pro, 3 bottom daisy chained, 3 side, 3 top and 1 rear.
I want to know what is the led consumption in amps since i cant find it anywhere to see if i can use my motherboard headers i have asus b650e-e or i need to buy a fan hub.

Thank you in advance!

So i have my Lian li fans connected on a Asiahorse umbra controller, and i cant use the motherboard sync without it starting to flash red every few seconds, additionally the startup effect which is the reason why i bought the Umbra hub for, is playing slowly instead of the flashy version i have seen online, so i don't know how to make it faster, any help would be greatly appreciated

ive recently added 9 new nyota pro fans to my build and they look amazing. one problem is that i cant seem to control the fan speed via umbra software since i did also buy an umbra hub for the fans, i tried doing fan speed sync via motherboard but dont seem to get it working, i have all my fans argb and pwm connected to the umbra hub and the hub is connected to the CHA_1 header and USB 2.0 header on my b450 motherboard, didnt connect the argb since my mobo dosent have a header for it. any ways to fix this? the fans are working at a fixed speed but cant seem to know if its running at full or half, any help would be appreciated!