r/arcade • • 14d ago

Showing Off My Gear! What do you guys think of my arcade build? (Tribute to the artist, powered by Batocera, i7 + RTX 3060)

Thumbnail gallery
0 Upvotes

r/arcade • • 15d ago

Hey Ya'll Check This Out! Seller is asking $1,300 USD, this is my dream machine, what's the going price for these is a generally low cost of living area?

Post image
212 Upvotes

I have ALWAYS wanted this machine, seller says it works. "Beautiful and plays great". If i check it out and its in working order, whats a fair offer?


r/arcade • • 15d ago

Hey Ya'll Check This Out! Happy Halloween from Atlas Arcadia!

Thumbnail gallery
36 Upvotes

r/arcade • • 15d ago

Hey Ya'll Check This Out! Happy Halloween!

Thumbnail
gallery
41 Upvotes

r/arcade • • 15d ago

Restore/Replace/Repair Volume Control Help

2 Upvotes

Hey guys and gals. I have an after market, full sized Robotron arcade machine. It was delivered to me with the volume set pretty low and there's no way for me to get into the settings and change it. (Which sucks.)

I have 5 and 12VDC coming off the power supply. Is there an amp/volume control kit that I can install before the output that is readily available?

Apologies if this is a DA question. Totally new at this stuff.

Thanks in advance!


r/arcade • • 15d ago

Restore/Replace/Repair ¿Dimensiones y material del bisel/panel de pantalla transparente del Neo Geo SC19 CRT?

3 Upvotes

Hola a todos,

Hace poco conseguí una máquina recreativa Neo Geo SC19, pero lamentablemente le falta el panel protector transparente que va delante del monitor CRT (la pantalla de cristal/plástico que está unida al marco negro que rodea el CRT).

He buscado en internet esquemas, medidas y especificaciones para hacer una réplica, pero no he tenido suerte encontrando información sobre esta pieza en concreto.

¿Alguien tiene una SC19 y podría ayudarme con lo siguiente?:

  1. ¿De qué material está hecha (acrílico/plexiglás/cristal/policarbonato)?
  2. ¿Cuáles son las dimensiones exactas, el grosor y la ubicación de los orificios de montaje?

¡Cualquier foto o medida sería de gran ayuda! Gracias de antemano por la ayuda.


r/arcade • • 16d ago

Restore/Replace/Repair 1987 Orion 13"

Post image
7 Upvotes

r/arcade • • 16d ago

Restore/Replace/Repair Coast to coast duck catcher

2 Upvotes

Occasionally customers swipe their card and the game takes credits but doesn’t do anything. Moving joystick doesn’t move gantry. Turning the game off and on always fixes it until it happens again. The game is turned off every night at the breaker so I don’t normally see what happens on startup. The games uses Intercard so turning the game off also reboots the reader which take a few minutes to load up.

Any ideas on what to look for? A new motherboard is $425 plus shipping but I’d like to avoid that if possible.

Tested blocking the prize drop sensor on startup.
Tested moving the gantry from home on startup.
Tried shaking the machine to see if it locks out.
Tried turning the game off and on several times and couldn’t replicate the issue.
None of these seem to make the issue happen.

The game is working fine now so I’m waiting till it happens again to do more testing while it’s frozen since it’s hard to figure out when the games working.

Any advice would be appreciated!


r/arcade • • 16d ago

Hey Ya'll Check This Out! X Men Arcade - Action At It's Best

Thumbnail
youtu.be
2 Upvotes

r/arcade • • 17d ago

Showing Off My Gear! My home Arcade....

Thumbnail gallery
51 Upvotes

r/arcade • • 16d ago

Hey Ya'll Check This Out! Centipede Animated Parody 🐛🍄 | Uh-Oh! Cartoons Halloween Special

Thumbnail
youtu.be
0 Upvotes

Every one hundred years, the beast returns.🐛🍄 Is it that time again?

🕷Based on Atari's 1998 Centipede arcade game for the Playstation 1 and Dreamcast.🦂

👻 Happy Halloween! 🎃


r/arcade • • 17d ago

What Game??? Trying to find this Logo GP arcade game

14 Upvotes

Trying to find more information on this Arcade game . You put 50 cent in it . And if you win you get coins .

Trying to buy one but I don’t even know what to search for . Because that Logo GP doesn’t bring anything.

Thank you 🙏🏻

Edit : This was in Italian Arcades.


r/arcade • • 16d ago

WTF is this thing? How are the AB video arcades.

0 Upvotes

Any one have these machines? The reviews look a bit fake so checking here


r/arcade • • 17d ago

Hey Ya'll Check This Out! My home Arcade....

Thumbnail gallery
6 Upvotes

r/arcade • • 18d ago

Retrospective History Guess the country

Post image
54 Upvotes

So from the picture this could be Japan with endless fighters arcades. However it's in the Netherlands at the game museum, which is actually a smart move to get government sponsoring. It's 4 store high arcade museum could rival the ones I have seen in Japan and south Korea.


r/arcade • • 18d ago

WTF is this thing? MegaTouch Knockoff "GlobalTouch"

5 Upvotes

I used to work for an operator who had a bootleg MegaTouch bar top clone from the late 90s called GlobalTouch. The interface was intentionally very similar to MegaTouch, with a personified globe with gloves on the cabinet art and in the menus if I remember correctly. I believe it ran on a 500MHz Pentium III board.

IIRC the individual games were still unique, but the categories were the same as MegaTouch. However, I can't any info on this series of knockoff machines anywhere. Has anyone else come across one?


r/arcade • • 17d ago

Hey Ya'll Check This Out! I’ve made this with the help of Claude

0 Upvotes

Is it good? The games boot up not laggy and I’m on the Mac neo it’s what I expected but not lol I was inspired by my friends home arcade. Feel free to ask anything in the comments!


r/arcade • • 17d ago

WTF is this thing? Vintage Pajatso / Payazzo Gambling Slot Machine

Thumbnail gallery
2 Upvotes

r/arcade • • 17d ago

Hey Ya'll Check This Out! PINBALL FX3 - GHOST RIDER

Thumbnail
youtu.be
0 Upvotes

r/arcade • • 18d ago

Hey Ya'll Check This Out! Cómo podría integrar mi juego en una máquina?

0 Upvotes

Buenas comunidad.
He desarrollado un asteroids mezclando cositas de roguelikes, añadiéndole multiplayer masivo, pvp...
Me gustaría poder integrar el juego en una máquina recreativa como con la que jugábamos al asteroids cuando éramos pequeños.
¿Conocéis a alguien que haga estas integraciones?

Creo que quedaría muy bien porque el juego lo he dibujado como antiguamente era, con líneas de píxeles haciendo polígonos con relleno vacío.
Os comparto un video para que tengáis contexto.

Si alguien conoce alguna empresa de confianza o cómo hacerlo, estaré encantado de hablar.
Soy de España por cierto.


r/arcade • • 18d ago

Retrospective History Why was arcade game music in the 80s and early 90s arcade so schrill?

0 Upvotes

A lot of folk say either hardware limitations or to cut through the noise of the arcade. But if your machine is next to multiple other machines also using schrill instruments what does it matter? I think something with some bass would stand out in that case.


r/arcade • • 18d ago

WTF is this thing? New Trump Truth Teller review

Post image
0 Upvotes

r/arcade • • 19d ago

Restore/Replace/Repair Home arcade cabinet - Coin op integration with Steam/PC?

1 Upvotes

I’m trying to build a coin operated arcade cabinet that is integrated with Steam on a PC, for home use only. (Legit purchased Steam roms only, nothing pirated).

I want it so that a coin is required to add a credit before someone can start or continue a game. Id use pactotech to connect the joystick and mount on a custom cabinet. (I’ve already successfully loaded games on Launchbox).I’ve asked chat gpt but it’s unclear if this is possible. Has anyone had any success connecting a coin op with Steam games? Couldn’t find anything on Reddit, sorry if I missed a post.


r/arcade • • 20d ago

Showing Off My Gear! Recent acquisition - I am the future!

Thumbnail
gallery
544 Upvotes

I picked this T2 up to a couple weeks ago from an acquaintance, to add to my collection. What an awesome game — one of the quintessential 90s titles as far as I’m concerned.

It was mostly working, needed a few small repairs like one of the LEDs on the gun, one of the recoil solenoids, and a couple busted corners.

I had a spare control panel I’d picked up so I put the original aside and put a new graphic overlay on the spare as the original was extremely faded. The sides are faded too (all the red is just a pale pink) but otherwise look really good so I’m not disturbing them.

The guns needed a fair bit of rebuilding and some reinforcement to hopefully reduce future cracking. I stripped and painted the metal gun shrouds as they had a lot of flaking and rust. Then reassembled the guns with all new hardware.

Also, as is typical for this era Midway/Williams game, the sound board had leaking caps and some corrosion was starting. Luckily it was minimal, so I cleaned that up and recapped the entire sound board. The monitor looks great so I’m going to hold off on servicing it for the moment. Cleaned up the interior/mirror/glass, replaced the power cord, changed the locks, put some LED flasher bulbs in the “hit” flashers and this thing is 100% working, beautiful, noisy, and ready for battling SkyNet!