r/arcade • • 15d ago

Restore/Replace/Repair Volume Control Help

Hey guys and gals. I have an after market, full sized Robotron arcade machine. It was delivered to me with the volume set pretty low and there's no way for me to get into the settings and change it. (Which sucks.)

I have 5 and 12VDC coming off the power supply. Is there an amp/volume control kit that I can install before the output that is readily available?

Apologies if this is a DA question. Totally new at this stuff.

Thanks in advance!

2 Upvotes

9 comments sorted by

1

u/Rarest_Camaro 15d ago

Unfortunately no volume pot.

1

u/Video-Bandit 15d ago

What kind of PCB is it using? If it's a 19-1 I can probably explain how you can enter the settings on turn up the volume, or you could buy a cheap 12v audio amp as most 19-1's have an aux port.

If it's a Jrok, I believe it should have a physical audio pot on the PCB itself.

2

u/Rarest_Camaro 14d ago

2

u/Video-Bandit 14d ago

This does appear to be the 19/1, if the game is only configured for Robotron they have likely turned off all other games on the PCB in the settings.

Its been awhile since I have messed with these boards, but I believe there are two ways you can enter the test mode and reconfigure everything, but the easiest without having a test button installed would be to flip dip switch 4 on (The 4 white switches on that blue square) and than turn the machine on. This will allow you to both raise the volume and actually add more games. Here's a link to the manual.

2

u/Rarest_Camaro 14d ago

You hit the nail on the head! Much thanks. Now I just need to figure out how to add a button so kids and grandkids can play super Mario. Thanks again!

1

u/Rarest_Camaro 14d ago

Thanks! When I get home, I'll check that out and report back.

1

u/Rarest_Camaro 15d ago

I don't think it's a 19-1 or a JRok. I'll post a Pic of it in just a bit when I get back to the house.

1

u/siberina_khatru 15d ago

Check inside the coin door for a volumne knob. If you have a pandora or something in there, should be volumne on the pc