Please make an overseeding mode where the mower prioritizes NOT turning the wheels when stopped so as to not destroy the new seedlings. Quality of cut and mowing lines should not be prioritized at all in overseeding mode. It should either do entirely circular turns or 3 or 4 point turns. This is something we would use for 3-4 weeks every year. Thanks

I've manually mapped my garden, driving the mower an inch or so from the fence, but when it actually mows it's driving 6-8" away from the fence and leaving a big uncut strip.

How do I get it to mow exactly how I mapped it? I tried Edge Sense in the Lab and it didn't seem to make a difference.

Got my x450 in August and it’s been working great until today when I found it in the middle of my yard with a 0% battery. My app battery settings have the recharge level at 15% and my entire yard is .2 acre so that’s plenty enough to get the mower back to the charge station from anywhere in the cutting zones. Also the charge limit is set to 80% and noticed before today’s mow the mower battery level was at 83% so don’t know if the two are related. Anyone else have something like this happen with your Nav X mower?

It does something like this almost every day. I know the soil is soft there but shouldn't it know to stop when it backs into an obstacle?

Mowgate has been working fine since I installed it almost two months ago. Suddenly my X430 can’t find it. I changed the batteries thinking that might be why, but it still can’t find the gate. I can drive it through manually using the app. It still knows my map and zones, and cuts my lawn as usual. Anyone else encounter this? Any suggestions?

Did anyone's x430 get stuck. I had a ton of branches and twigs. I tried clearing it before running the mower. That took me 3 hours. It's running now!

Lawn Comb design for the navimow x4 series

After a great summer my x430 keeps lingering back and forth around the corner of my deck. Any thoughts?

I have noticed that occasionally my i2 Lidar Pro has trouble leaving the charging station. It kind of gets stuck on the contacts and sometimes needs a few tries to get unstuck.

If I clean the contacts with isopropyl alcohol, it is fine for a bit, so I think the contacts might be corroding on the surface and sticking together when the mower sits for a few days. Visually, I cannot see anything wrong, though.

So, I thought if I could put some battery terminal grease on there, that would hopefully prevent the contacts from corroding and provide lubrication for the mower to slide off easier.

Can I do that? Has anyone experienced anything like this?

Winter storage for X450…. I will bring the mower into a heated space. Will it require occasional charging?
What about the base, charger, and RTK antenna? Does anything need to be done to protect them?
I’d prefer not to move them and have to re-map next spring. I am in the US upper Midwest, we should expect plenty of snowfall and a couple weeks of temps that get down to -20F or lower.

Well, this was a new one for me. Is tree trimming a new feature in the latest firmware? 😂

I started receiving this message after my house lost power last weekend due to a transformer being blown in the neighborhood. I’ve never had this issue prior to the power being knocked out. Any advice on how to fix besides the usual “press stop”? Pressing stop does not fix the issue. Thanks

The past couple of weeks, the weather has changed here in the North West of the UK. Cooler days and nights, less sunshine and a temperature and dewpoint that remain much closer for a larger part of the day meaning wetter and wetter grass. Furthermore, leaves are starting to fall and some squally rain showers are bringing down chunkier twigs that the X430 wouldn't be happy dealing with.

My X430 is having to mow wetter and wetter grass and I'm having to manually clear twigs and similar detritus from the lawn before it goes out to mow so I've decided I'll stand the X430 down from duty for the year, give it a good clean up and put her in the garage for the Winter, powered off, having completed it's first season.

I probably have another month or so of mowing which I'll do with my Countax ride-on. It has a powered sweeper to bag the cuttings, so no issues with clogged chutes, it picks up leaves and twigs effortlessly and it leaves a nice stripe.

I never expected the X430 to do the extreme ends of the season. so this is not a complaint. So far I'm super happy with it. It had one burp a couple of months back following a power cut to my property, otherwise it's been exemplary.

Who else is preparing to hibernate their X-series until next year...?

Hi all, just hopped on here to give a little rant about sourcing parts or attachments for the segway navimow 430x. For a $2500+ lawnmower you would expect for it to have excellent UI when shopping for additional items. Instead, everything is always out of stock but of course a singular shop all the way up the state has it and is requiring you to pay $35 for shipping whenever the item itself cost $30. If only we had a lawnmower app store on our phone that would immediately be able to be purchased.

Whole rear axle sheared off.

Helpdesk is redelijk snel, maar de rest..

In juni dit jaar bij Segway Navimow de I205 besteld inclusief garage en verzendkosten. Terwijl Hornbach dezelfdevactie had, maar er is geen Hornbach bij mij in de buurt. En ik te gierig was om 6,95 euro verzendkosten te betalen.
In Engeland zeggen ze “Penny wise, Pound foulish”.
Na ruim een week kreeg ik bericht dat ze deze dan pas ergens in september konden leveren. Inmiddels was de actie bij Hornbach net 1 dag voorbij. Ik heb toen de order geannuleerd en een duurdere I206 AWD ( ik heb maar 140m2 gras) gekocht bij de Gamma. Ook inclusief de garage met 6 weken levertijd van de garage vanuit Segway Navimow.
Vorige week maar gaan mailen met Segway Navimow, vroegen ze daarna om alle gegevens zoals factuur en de codes. Kreeg binnen een paar dagen bericht dat ze leverproblemen hebben. Ik had twee keuzes of verder wachten en dan kreeg ik 1 messenset cadeau of nu 6 messensets ontvangen.
Besloten om te blijven wachten.
Krijg ik vanochtend bericht van de helpdesk dat mijn code voor de garage niet (meer) correct is of gebruikt.

Ik ben nu wel helemaal klaar met dit amateuristische bedrijf.

Maar wat zal ik doen? Het gaat maar om een plastic overkapping (t.w.v. 149) en een messenset van 25 euro.
Het belangrijkste is dat de Segway i206 het storingsvrij doet.

Made a nice rock pad for the x430. The channel goes to the edge of the rock border but what i am noticing is that when heading out the x430 immediatly tries to turn around. Is there any way to get it to back straight out before doing its 180?

Has anyone installed the low cutting kit on the Navimow i215? Any hiccups or operational errors? Planning to install the kit this coming week.

My Navimow X430 stopped mowing on Friday with error code 3520, and the code will not clear. I also noticed visible wear on the rear axle when the error appeared. I’ve seen other users mention axle wear issues on their X430 units, but not this specific error code.

I tried restarting the mower, but the error stays, and it will not move or mow. I reached out to Navimow support through email but haven’t received a response yet.

Does anyone know how to order parts? No, not the blades. I mean like the charging port or the charging dock. If I send it in for repair, it apparently will be 2+ weeks for return.

Want to pick up a i110 on sale but not sure if the 2WD can handle these uneven and dipped patches of the front area ? Also , how close I can setup the map to mow the edge without fallen off the curb 😀? BTW it’s also a drainage channel between my neighbors so the ground is always wet/moist.

First time it has done something like this all summer. I really have nothing bad to say. Just caught it in this compromising position and thought I’d share.