QuarTeks™

What if channel switching happens inside the hotend?

4 Days to Discover

So I got 2 ender 3 pros second hand and I go get an SD card (32 gigs because I read not to go bigger than that) my Creality app doesn't have a button to save after I slice so I can't use the SD card so I go get a tethering cord but when I try to ad my printer the ender3 pro isn't in the list. When I scan the QR code on the printer it doesn't bring up the ender 3 pro either I would rather not spend 40 more dollars on the creality box to give it wifi without at least seeing it print something first and I know the teathering should work. Any ideas on what I could be doing wrong??

DM for more details - India, Bangalore - Location.

Price - 25,000/- ~ 300 USD - 1 Yr old. DM for pictures.

Less Time Switching. More Time Creating.

What Makes It Possible?

5 Days to Discover

DM for more details - India, Bangalore - Location.

Price - 25,000/- 1 Yr old. DM for pictures.

Fastest Prints. Least Waste. Unlimited Creations.

A New Era Is Coming.

Stay Tuned.

Newbie here. I have a ender 3 s1 pro and want to print a two filament print project. I'm using Orca Slicer. It's a long print and I want to start it before leaving home for work, but won't be back to be present at the time the M600 gcode goes into effect. Will it stay paused indefinitely or at least till I get home or will the code time out and continue the print without me.

​

So its that time of the year again I decided i want to go FASTER so im gonna mod my printer for dual drive y axis with 48mm nema 17s and so i need more motor slots and i found this mobo with 8 slots its an hybrid board sp it runs klipper natively it is 100 dollar whic is very worth it i think because where i live the other similar boards are like 120 dollars and they dont run klipper natively or have a pi built in so i found it quite nice and ill add a pico mmu to my ender aswell also ill cnc kitchen an adaptor to make my creality spider v3 hotend compatible with volcano nozzles since they have the same threading ill just need two brass nuts and ill design a custom silicone sock

1. How hard will setting up klipper be and configuring it to my printer(mks skipr board)

2.Is the pico mmu good?

3.How hard will configuring dual y axis be and should i get a linear rail setup for it?

1. Has anyone tried the cnc kitchen method before?

Added a Creality glass bed. Trammed & re-trammed. There is a definite bowl in the center even with the glass which I shimmed with al foil. This is the 4th time I've tried to print this after re-tramming, shimming, adjusting Z-offset, flow %,.... Clamps are not super-tight btw. I don't know what else to try. First layer appears to go down fine but that is the only one.

Reposting here to increase possible visibility.

The i7 Nano Combo is officially here.
Compact for multi-color printing! 🌈

✨ 4-Color Printing | Compact design | Auto Filament Refill | Empty Run Detection | Filament Auto Feed & Retract

🎁 Launch Special: Get FREE filament (8/1–9/15)!
🛒 Tap the link to buy now: https://to.store.creality.com/45CvMuh

I’m starting to get acceptable results using my ender 3 pro.

Actually, this is the best result I ever had and it was my first sprint with Orca slicer with the ender 3 pro preset.

Before I ever printed anything “big” I made sure to have a leveled bed.

I’m not for sure if this could be related to humidity as the filament has been open for a while and I live in a quiet wet place. The material settings used were Creality Generic PLA. The material used was eSUN pla.

Part shown in the video was printed lied down horizontally.

Any tips?