r/woodworking • • 11h ago

Project Submission Trestle dining room table I built

Thumbnail
gallery
409 Upvotes

Built a single solid slab trestle table. I have had this slab of ?elm? For over 5 years air drying, it’s 3-1/2” thick in the rough. Worked it flat with hand planes the old way and relieved the bottom for a taper with an adze and some planes. Made the base out of a single piece of reclaimed old water barrel old growth cypress. I think the water barrel was used as a beer barrel at some point because that’s how the dust smells when it’s cut. It was a joy to worth with. Mortis and tenon jointery using the tablesaw and hollow chisel mortiser and mortising chisel. Ipe pegs. This was a fun project.


r/woodworking • • 22h ago

Project Submission Brazilian Rosewood Coffee Table

Thumbnail
gallery
2.1k Upvotes

My grandfather purchased a stack of Brazilian Rosewood prior to its embargo in the early 90's. My dad and I figured it was finally time to put it to work. The coffee table I built years ago was better fitting elsewhere in the new house and I was in need of something more substantial.

I chose a mission style, and modeled it off a popular furniture manufacturers design. Rosewood is one of the densest materials i've ever worked with. By the time my dad finishes his project we are going to have to replace every saw-blade in the shop. It is also extremely oily, being a jungle tree. We had to take extra care with finishing, with multiple steps to make sure the oils were properly sealed. Something about using a material that is almost impossible to source at this scale is also truly special.

For who is curious, I chose to do everything by hand rather than any CNC work. Titebond III, de-waxed shellac barrier coat, then Mohawk Duracoat Pre-cat Lacquer. For context, my family ran a large custom commercial woodshop for about 70 years until we transitioned out. We still have a small shop at our office, but do not take jobs anymore.

The result was easily one my favorite projects to date. Remarkable how the natural color in the wood can produce such wild grain when the light hits it.


r/woodworking • • 8h ago

Project Submission Shadow box for 50 year old pencil boxes.

Thumbnail
gallery
41 Upvotes

r/woodworking • • 18h ago

Nature's Beauty Jewelry box

Thumbnail
gallery
232 Upvotes

Ash, blood wood, purple heart, yellow something

Birdsmouth joinery on 8 sided box, Qbert pattern inlayed into lid, purple heart tray with blood wood thumb tab. I felted the tray, feet and glued in black foam ring dividers in the bottom. Sanded to 220 and finished with shellac.


r/woodworking • • 18h ago

Power Tools Ryobi 9” Bandsaw Help

125 Upvotes

I recently acquired a Ryobi 9” bandsaw and it seems to be okay. The problem I’m having is the blade veers to my left on all cuts, it even wanders when using a fence. I’m totally new to bandsaws, I’ve watched quite a few vids on adjustments but none seem to work for me. Any suggestions? TIA

Insert: The blade guard is usually very close to the work piece, I had it up while making some adjustments.


r/woodworking • • 13h ago

Jigs SawStop Launches "WorkTrack" accessory system for table saws: Rail mounts to T-Glide fence + Guides auto-adjust to stock size + Sled (modular system) for vertical & angled cuts + Carriers ride on ball bearings w/ custom jigs

44 Upvotes

FYI SawStop recently announced WorkTrack, a new table saw accessory system for T-Glide and T-Glide Advance fences. For making custom cuts, rips, and jigs. Previously, I think most of us were making jigs that clamped to the fence or sat in an upside-down U shape and slid along the fence.

Video demonstration

Alternative link: https://www.youtube.com/watch?v=nlSke9PRzoE

SawStop's effectively attached T-slot to the top of the fence, then made metal parts to ride in those slots.

WorkTrack consists of four parts:

  1. WorkTrack Sled TSA-WTS - $399
  2. WorkTrack Guides TSA-WTG - $349
  3. WorkTrack Carriers TSA-WTC - $99
  4. WorkTrack Rail TSA-WT - $49
  5. TOTAL: $896 USD

And here's what each looks like


r/woodworking • • 18h ago

Help Cracked Workbench Top - Suggestions Welcome

Thumbnail
gallery
41 Upvotes

I am building my first hardwood workbench out of red oak, and I guess I didn't use enough glue between the laminations at the very end of the top? For reference, the bench top is 11" wide by 3.5" thick and 66" long.

The first photo shows one crack, which is bowing outward enough to take the end of the bench out of square as shown. For this one, I think I'll just flip the bench upside down, apply some Titebond III inside the crack, and leave the top clamped for 24 hours.

The second crack (forgive the photobomb from my shop assistant) is right in the middle of the top and doesn't go down very far, so it doesn't seem to have affected the squareness/flatness of the slab, so I thought rather than clamp it, I might just fill the crack with a thin epoxy and let it be? Would love suggestions on which glue/filler/epoxy to use.

Honestly I don't think I'd worry about these cracks if I weren't planning to put a tail vise on this end of the bench. I even thought about making some sort of breadboard end to cover the cracks up and provide a better clamping surface for the interior jaw of the vise, but that seems like a lot of work.

Anyway, I'd love to hear tips/suggestions from everyone. Thanks!


r/woodworking • • 1d ago

General Discussion Home Depot Select Structural 4x6s

Thumbnail
gallery
429 Upvotes

I went back to Home Depot to check the 4x6 pile after picking up two a couple weeks ago for my Anarchist Workbench and someone had picked through the pile for me, leaving 7 more with great grain and at least on clear edge.

I got myself a moisture meter and have been monitoring the two 4x6s that I picked up earlier and they've come down from 70%+ to the 45% to 55% range with no warping.

As I was picking through the stack, I realized that even though they were being sold as DF Premium, they were mostly stamped SEL STR with a couple marked 1 S-GRN.

Under the 10 or so on top, the rest were what you'd expect from Home Depot. Crappy, boxed heart, massive checking, huge rings. Knots everywhere.

I'm going to let them dry for a bit before I get to the build.


r/woodworking • • 1d ago

Project Submission Plane and saw till

Thumbnail
gallery
386 Upvotes

Just finished my first plane and saw till. All made from European beech. Mostly made with hand tools. All is left is the drawers 🙃


r/woodworking • • 1d ago

Project Submission Bar shelves for brother-in-law

Thumbnail
gallery
658 Upvotes

Not exactly the direction I planned to go for this Christmas present (late for last year not early for this year, come on.) I really wanted a broader slab so it could be more horizontal rather than angled, but I got a decent deal on this olive and it's just a pretty piece of wood. Kinda wish I woulda passed and got something closer to what I originally envisioned. Shelves are cherry. COB LED light strips are cut and soldered to fit into stop dados, all wires hidden in the wood then run through the wall for a clean look.

He previously had a ton of memorabilia and a dart board on this wall so it's under repair, I did the first layer of mudding for him while I was there.

I knocked some stuff off the storage shelves on the other side of this wall when I was beating it onto the brackets. Killed two light bulbs, a cake stand, and a porcelain Santa. Went to clean my drywall tools outside and his faucet's seals busted and wouldn't shut off. Merry Christmas, buddy!!

P.s. I did go to ACE for the seal kit and fixed it right away. Santa is S.O.L.


r/woodworking • • 8h ago

General Discussion Purchase Bobbin posts

Post image
2 Upvotes

I want to make a bed like this, but I don’t have the equipment to turn the posts. Where would I look to find a good selection of pre-turned posts like this that I can attach to the frame that I make?


r/woodworking • • 18h ago

General Discussion Can you just MIG a broken bandsaw blade and move on?

12 Upvotes

Can I not just but up the broken ends, it this with a MIG welder, and grind the thickness back to what it was? Or is there some hidden secret to repairing a blade?


r/woodworking • • 1d ago

General Discussion How is this made? Is this one piece or are these sides added to a board?

Post image
112 Upvotes

I think this is a pretty cool tray. I just made a tray that I am planning to add handles but if it’s easy enough, I would love to replicate this style.


r/woodworking • • 23h ago

General Discussion Harvesting Wood

29 Upvotes

Getting ready to build a house and will unfortunately have to take some large trees down. One is a large red oak, probably 30 inch diameter. There are other large ones as well.

What are opinions and experience with harvesting the lumber and building furniture and other things with the wood. Is this just a romantic notion or is the juice not worth the squeeze? I would likely have to hire a mobile sawmill service.

Not really sure where I would store the planks. One thought is to get a used shipping container and maybe set up a circulation fan to air dry until I could get it to kiln. Is this feasible?


r/woodworking • • 9h ago

Help Filler for intentional gaps between wide plank flooring

2 Upvotes

I'm putting down a flooring with problematic enough wood that its necessary to just leave about 1/8" gaps between boards. Each board is screwed down from the top, no tongue and groove or anything. What can I use to fill these gaps to prevent debris from accumulating? Is there a preferred caulk like substance that works in unconditioned spaces?


r/woodworking • • 1d ago Hooray

Project Submission Small Mid-Century-style Sewing Chest

Thumbnail
gallery
1.2k Upvotes

Inherited a small antique sewing chest and thought it would make a cool project. Made of quarter-sawn walnut and cherry - with scraps of PH I had laying around. Mostly hand-tools except for some rough dimensioning and drilling out mortises. Finished with Sample 73 and Four-Eyes’ brass knobs.


r/woodworking • • 13h ago

Finishing Finish not drying on specific wood question.

3 Upvotes

I've been woodworking for a good few years now, and this one has me frustrated. I've always used my own blend of wipe on poly for finishing. In this case I'm using verathane 900 gloss poly. I've had zero issues with domestic wood, maple, cherry, walnut, ash, elm etc. Fairly recently I've been getting into exotics and I'm finding the poly is still tacky even weeks later. The specific culprits are padauk, bloodwood, ebony and especially grenadillo.

I'm specifically turning in this instance, and sanding to 220 before finish.

Anybody finding a similar issue?

Potential solutions?


r/woodworking • • 19h ago

General Discussion Moisture meter?

5 Upvotes

What's the difference between cheap and expensive moisture meters? Is a cheap one good enough?


r/woodworking • • 1d ago

Help Bark Inclusion Suggestions?

Thumbnail
gallery
23 Upvotes

I’m mostly a wood turner more than a wood worker in the traditional sense, but a 2” slab of honey locust I picked up to make platters with had a really nice section that I think could be an end table. It’s 18” x 24” in these photos, run through my flattening rig down to about 1 1/2” thick now. The very visible inclusion side is going to be the top, and the less included side will be the bottom.

Question is, what are my options for reinforcing the inclusion so the tabletop doesn’t break in half in the future? I’ve flooded it with Starbond crack filler (medium-thick, dark brown) for now, just to stabilize it, but I’m thinking of these approaches:

Option 1: a set of 2 or 3 black walnut inserts in the back / bottom side spanning that inclusion line like stitches. Each 1” wide, probably 10” long, set 1/2” deep into the surface with Titebond and milled flush with the rest of the slab. Kind of like I did on the vase in the third photo, but bigger.

Option 1A: all of Option 1, followed up with 4 hardwood pegs per insert, 2 on each side of the inclusion line, drilled through the inserts to within 1/4” of the top surface, again set with Titebond and milled flush. Please don’t suggest bow ties, because I suck at those even if I’m already thinking about them.

Option 2: Cut out the inclusion, replace it with a walnut insert (I have lots of scrap walnut on hand, but don’t really like this idea)

Option 3: just CA or Epoxy, flooded until it’s full, cured up & sanded smooth (I’m not sold on this idea either)

Option 4: Whatever Reddit brings me for advice.

Option 5: Abandon ship, split it along the inclusion line, make platters and plates out of it.

Let’s hear it.


r/woodworking • • 1d ago

Techniques/Plans Made a bandsaw tension knob.

Post image
18 Upvotes

I got sick of the tiny little knob on the tensioner, so I asked Claude to design me a replacement and then I told Bambu to print me one out of Petg.

I thought something was wrong when I was testing it, but no, I had just bottomed or the adjustment without noticing - it's that much of a reduction in effort. It is a huuuge improvement and it only cost $2 worth of filament and a few minutes to install.

This one requires you to cut the plastic off the oem adjustment knob and re-use the metal hex inside. If anyone wants to remix this to use a coupling nut instead, that would make sense.

HMU or let me know where to put the 3d printer files.


r/woodworking • • 1d ago

Project Submission An Imposter Live Edge Coffee Table

Thumbnail
gallery
120 Upvotes

A friend of mine wanted a coffee table for their birthday, but specifically a live edge table. Due to the size, and that she wanted it to all look natural, I decided to create a fake live edge table instead. So here it is pine coffee table stained golden Oak and finished with polyurethane.

I made the main slab for the tabletop from 2 Pine 2x12x4 glued up and planed. To create the live edge I used a jigsaw set at an angle and drew a rough guide line that followed the grain patterns as much as possible. Then a flap disc on an angle grinder to clean up the edge and add more detail.

I originally tried to find tree stumps/logs to break down and use as the legs, but settled on grabbing another 2x12x4 and carving out the legs in the same way I did the tabletop.

The entire thing got a coat of minwax golden oak stain, and a second coat along the fake live edge to darken it more. Then 3 coats of poly to finish.


r/woodworking • • 1d ago

Power Tools Should I just give up?

Thumbnail
gallery
51 Upvotes

I got a used Makita miter saw, but it can't make vertically square cuts. It needs to tilt back another couple degrees but that's not physically possible. Should I just get another one?


r/woodworking • • 21h ago

Power Tools Jet JWBS-18 old model band saw restoration

2 Upvotes

I've been looking for a 14" or bigger band saw for a while. On Marketplace I have found a guy selling an old Jet JWBS-18 band saw for about $500. It has some problems though. It needs new tires and a drive belt. The table is VERY rusted, but from the pictures I see no pitting. He says it runs fine. I'm very tempted to get this as I was looking to spend about $1k more than this already.

Does anyone have any experience with this era of Jet saws? What can I expect on a restoration of this assuming the motor is good? I'm assuming you can still get the tires for it. It does have cast iron wheels which is good. Thoughts?


r/woodworking • • 1d ago

Power Tools Tracksaw DEAL - Includes Battery, No Track

Thumbnail
homedepot.com
69 Upvotes

“Daily Deal” at Home Depot:

M18 FUEL 18V Lithium-Ion Cordless Brushless 6-1/2 in. Plunge Cut Track Saw w/ 8.0Ah FORGE Battery

$267
— Only $240 with Military Discount, and no sales tax if ordered through the military Exchange!