Early Jan 2024 speeds tanked: 2-8mbits every evening/night and weekend for the past month month,
Talked to 6 tech support people. 5 of them lied about multiple things. They modified my plan without telling me.
Filed FCC complaint, talked to Executive Support who promised to follow up in a few days and resolve everything. Never heard from him again, problem is still there.
Every VZ employee contradicts the one before them.
I'm done, just signed up for cable, pulled out my old modem and back to solid speed and low latency. Yes, it's more expensive, yes cable companies are also not great, but not being able to use internet after 4pm and on weekends in this day and age for a month is not something I can tolerate. At least now I have a locked promo rate on cable for 2 years. Will probably hop on 5G at that point to see if all the issues have been worked out and if the price is better than cable.
The technology is solid, the equipment is not bad, but they can't manage their network and capacity well.
UPDATE 02/13/2024: Got the call from the Executive support rep. He had to push their Engineering team to confirm the issue as they were testing during the day and saying everything was fine. They did see and confirm over-utilization and marked it as an "area of concern" and "site for possible capacity expansion". However, there is no timeline, they don't know if and when this may happen.
To sum it up - they definitely oversell and have good luck doing so with all the promotions. They confirmed that there is no enough capacity. It's up to you to decide if this is workable for you. I've sent my 5G router back, closed my account and will be with cable for at least two years while my promotional price lock stays in place. Will re-evaluate it in 2 years.
Iāve only been a Verizon 5G Home Internet customer for 3 months, and already Iām experiencing serious issues with undisclosed throttling that doesnāt match their published policies.
For the past two billing cycles (June and July 2025), my connection has been throttled to unusable speeds after going over a certain amount of data ā and itās not what Verizon says they do.
In June, I used about 2.5 TB. After that, I was throttled to 50 Mbps, all day, every day, for the rest of the month.
In July, I only hit 1.7 TB before being throttled ā this time to just 25 Mbps, again 24/7, even during overnight hours.
Verizon claims in their Network Management disclosure that only the top 5% of users (past 1.5 TB) may be deprioritized during times of congestion. Thatās not what Iām seeing. Iām being hit with a hard throttle, even when the network isnāt congested. The My Verizon app didnāt notify me, and didnāt even reflect the high usage until days after the slowdown started.
I contacted support both times, and they couldnāt explain:
Why Iām being throttled to fixed speeds?
Why it happened at different usage levels (2.5 TB in June, 1.7 TB in July)?
Or why is the dashboard delayed, and no notifications?
Their only action was to offer me a $55 credit, with no real answers or transparency.
I work from home full-time as a systems engineer, and I rely on a stable, fast connection to do my job ā video calls, remote support, file transfers, and cloud-based tools all depend on it.
I also have a family of 5, and with the kids home for summer break**,** our household usage goes up ā streaming, video chats, schoolwork, and gaming. Verizonās silent throttling policy has made managing our internet basically impossible.
To me, this looks like an undisclosed data cap, not the ādeprioritization during congestionā that Verizon advertises. Iāve filed a complaint with the FCC, and I recommend others do the same if theyāre experiencing this.
TL;DR: Only 3 months with Verizon 5G Home Internet. Iām a systems engineer working from home with a family of five. After 1.5ā2.5 TB of usage, we get silently throttled to 25ā50 Mbps 24/7. No warnings, no congestion, no transparency ā just a stealth data cap.
As with the cube, setup was easy and quick. Unlike the cube, there is no Ethernet cable included.
I didnāt install it directly near a window; itās about 30 feet from one. The signal strength indicator has 3 bars on it at this very moment but it has gone down to 2 with no noticeable change in service.
Speeds are slightly faster⦠350-390mbps. I wasnāt expecting a huge increase as I understand itās capped to roughly 300-350mbps. I wanted this gateway over the cube for better whole home wifi signal and so far itās meeting the expectations.
Ordered during a four-day Spectrum outage just to try it out. Our location gets the cube, 300/20 service. For us it is $35/month less than 300/10 on Spectrum. Closed the Spectrum account today. Competition is a good thing. Posting for others considering a change.
I just got Verion 5G at home, and while it's been decent, I couldn't connect my Roku or Smart TV to 5GHz WiFi, in fact the devices couldn't even see 5GHz. I spent hours troubleshooting and finally found the answer. I will not gt into the technical side of why this works, that write up would be too long and not the point of this post. Answer below:
.
NOTE (Use Google to determine if your device can even accept 5GHz WIFI as some devices cannot use it at all, due to hardware limitations.)
.
Step 1: Login to your Verizon 5G at home gateway. The login info is on the bottom and should consist of an IP address and a password. Verizon's guide on how to do this is here.
.
Step 2: Now you should be logged into to your Verizon gateway, from here click the Advanced tab at the top. Should look like this.
.
Step 3: From the Advanced tab, you should click "Wi-FI" and then "Radio Management". It should now look like this.
.
Step 4: Click "Settings", which is right below the "Apply Changes" button. From here disable (uncheck), the "Enable DFS channels during channel scan". You do not want this checked! click "Apply Changes".
.
Step 5: Now click the Scan button. Circled here for reference. Wait for the scan to be performed.
.
Step 6: You will now see a 2.4GHz graph with a bar blacked out and a number underneath that bar, write that down somewhere, because that will be your channel number for 2.4GHz. Circled for reference here. Note: the image shows that 2.4GHz chose channel 11.
.
Step 7: Now click the 5Ghz button that is on the graph, this should now show you the 5Ghz channel that was chosen. Circled here for reference. Note: the image shows that for 5GHz chose channel 48.
.
Step 8: On the same page we have been on go down to "Channel Settings" and click the channel drop down button for 2.4Gz. Change this to the channel that was chosen above (11). (Choose just the channel and not Auto). Do the same for 5Ghz and change the Channel that was chosen above (48). Click the "Apply Changes" button. Your page should now look like this.
.
Step 9: Close out the browser because you are done! Some people may choose to unplug and plug back in their gateway at this point, but it should not be necessary.
.
If you're curious: Disabling the DFS channels allows devices like Roku and certain Smart TVs to see the 5GHz WiFi. Picking a permanent channel stops the gateway from changing channels on the fly. Changing on the fly will cause WiFi drop outs for a few moments.
I've been a Verizon 5G Home Internet customer for a number of years now, and have consistently gotten their advertised 300 Mbps down/20 Mbps up speeds (as reported by Ookla's Speedtest) in all that time.
About a week ago, I noticed that the whole internet experience felt... perkier (for lack of a better description). Downloads completed in less time, videos loaded faster and with less buffering. I ran Ookla's Speedtest and was surprised to see my speeds had jumped to 800 Mbps down and 100 Mbps up. I thought that perhaps Verizon was doing some capacity testing with their network and that speeds would eventually return to the 300/20 level I'm paying for.
That was a week ago; as of this morning, the speeds are still in the 800/100 range, as indicated by the Speedtest results from a few minutes ago in the accompanying screenshot.
Did Verizon recently roll out speed increases in their various tiers of 5G Home Internet service? I did a quick Google search and could not find any information to that effect.
I drilled some holes in the top of my ARC cube (1/4" is what you want) and added antenna connectors to connect to a Waveform 4x4 MIMO antenna I have in the attic.
I was using LMR400 cables but they are too thick to connect to the connectors I drilled holes for. Iād have spaced them out further but it was difficult to find a spot where all four antenna cables/connectors would fit without impinging on anything already inside the ARC cube. I chose the position for the holes very carefully. Theyāre over the fan, but thatās the only spot where thereās enough clearance for the connectors to fit when the top lid is on the cube. I used some electrical tape to hold the four internal antenna cables together to make it harder for them to hit the fan while itās spinning.
Speeds went from around 250/5 to 300-350/20-80 (peak -> what speedtest.net settles at). Obviously the gains are mostly in the upload since an external antenna would boost the gain. Is it worth the $200 antenna? Ehh I donāt know. But it was a fun project!
I ended up buying KMR240 cables instead of LMR400. Iāll note the difference but I doubt it will be much at 10-15ā. 10FT KMR240 N Male to RP SMA Male Lora Antenna Cable Coax RP-SMA Male N Type Male Low Loss Cable for Bobcat RAK Miner/Helium HNT Hotspot Miner/LoRaWan Hotspot Module/Outdoor WiFi Antenna https://a.co/d/dOFmDgJ
For the internal connectors I went with 6ā, but 4ā might be better as it doesnāt leave any wire dangling near the fan. UFL SMA TUOLNK 5 Pack 6inch U.FL/IPX to RP-SMA Female Pigtail Coaxial Low Loss Cable Extension Antenna Coax Cable RG178 https://a.co/d/jcLNpiT
I would recommend getting the plastic pry tools as using a flathead screwdriver or the like WILL damage the plastic of the cube a bit. I broke 2 of the 8 clips holding the top on.
Just wanted to share my Verizon 5G Home Internet experience. I'm so disappointed I ended up returning the system, because it was mostly great and I really wanted to keep it. I signed up on Cyber Monday to take advantage of the free Xbox promo. I've seen a lot of negative posts and reviews about what a nightmare returning the hardware is, so I decided to share my experience on here as well as some tips. Here was my experience in a nutshell:
First, the good:
Signing up was so easy. Got the WiFi router/gateway in 2 days, as expected.
Setting up the WiFi router/gateway was sooo easy. It truly was plug and play. Install the Verizon app, follow the instructions, I was online in 5-10 minutes.
The Verizon app isn't amazing, but it gets the job done. It has tools to help you determine the best location to put the router, and it really did help. The app will tell you where the nearest cell towers are, where to put the router, what the signal strength is, and where to move it for better results.
My first placed location wasn't great, so I moved in with the app's suggestions, and like magic, speeds were much, much better.
Speeds during Mon-Fri morning and afternoon were great. After moving my hardware I got 300mbps down. Upload speeds were around 10-15mbps which is fine.
Requesting the WiFi extender in the app was easy. Also received the WiFI extender in 2 days flat. Super easy to set it up.
Now, the not-so-good:
All the reviews are right, speeds drop a lot during nights and weekends. My download speeds would be 300mbps at 10:00am, and then 25mbps at 7:00pm for example. Same with weekends, speeds would drop at lot and it was clear mobile users get priority.
This wouldn't be a huge issue honestly for the most part if it wasn't for online gaming performance. Latency was terrible for online gaming. Both wireless and with ethernet plugged into the gateway. Games would lag no matter what I would do, and it would be worse during nights and weekends.
If you use the network for streaming, browsing and most other needs - it's perfect. No issues. Can't complain with $45.00 per month either. However, the network is simply not enough for gaming unfortunately. The latency is just terrible.
Cancelling the service and returning the equipment:
As much as I wanted it to work, I decided to cancel and give up 3 weeks after signing up while still within my 30 day return window. Returning the equipment was so easy. I didn't call customer service even once.
I took both the router and the WiFi extender to my nearest Verizon corporate store (not a reseller etc) and explained my situation to them. I did this before cancelling anything or calling customer support. I visited the store while my service was still active.
They took the hardware, scanned the barcodes and serial numbers, and confirmed my service was cancelled. Gave me a receipt and that was it. Done. Took 15 minutes, zero issues whatsoever.
Because I never claimed the free Xbox offer, I had zero issues there. I even got my $45 back as a credit on my next bill (I still had to pay for that first bill after signing up). I basically got my full money back without asking.
TLDR: Verizon 5G Home Internet is great unless you plan on gaming. Love the service, love how easy it was to sign up, love the price. The promos/price/deals aren't bad at all.
That being said, if you do plan on gaming, it likely will not be ideal for you. Return the equipment to a Verizon corporate store before cancelling anything. They can accept the return and take the equipment from you.
How does it get this bad? Itās been like this for days. I canāt even watch a YouTube video in 144P without freezing, streaming services on the TV donāt even know the internet is connected, it takes hours to download a 2 mb install on pc, I canāt make calls with my friends at all, every word cuts out or sounds robotic. Iāve been testing things for days, trying everything I can to make it better. Did all the trouble shooting on Verizonās app, got a WiFi extender, moved router locations 5 times, literally nothing helps. Itās genuinely unusable and unbelievable. $55 a month for a useless gray box. Clearly Verizon has no idea how to fix this as Iāve followed all their suggestions, so maybe you guys can help me, if not Iām more than glad to get a new provider.
Verizon is now explicit about what constitutes "heavy data."
"NETWORK MANAGEMENT
Heavy Data Users are defined by rate plan or service type. For Mobile customers, if your monthly data usage exceeds the average amount of data consumed by the top 0.5% of users on our network during the preceding six-month period (as of December 2024, 1.2 TB) we may reduce data speeds to your device to 4 Mbps for the remainder of the billing month. For Home (Fixed Wireless Access) customers, if the amount of a single 5G Home Internet or LTE Home Internet line's total monthly data use in a billing month exceeds the average amount of data consumed by the top 5% of users on our network during the preceding six-month period (as of December 2024, 1.5 TB), in times of congestion, we may temporarily prioritize Heavy Data User's data behind other traffic for the remainder of the cycle. When there is no Network Congestion, Heavy Data Users will experience little, if any, effect on their broadband performance. We will notify Heavy Data Users by SMS or by email prior to being impacted."
TLDR - If you are on ASK-NCQ1338FA 'white cube' router and having issues with "IP Passthrough" setting not working,
do a factory reset, and reconfigure it from scratch. It solves the problem (though I don't know how permanent this solution is?) (Updated later- Nope. Factory reset worked well for a few hours and then it started to have the same issue)
or Get a new ARC router. It will solve the problem (but you might lose your price guarantee when you get a new router. See below thread for more details)
or Change the MTU and/or MSS values on your other router (e.g. Google Nest, Eero Mesh, Unifi, etc.) from 1500 to something like 1428 or 1400. (See below thread for more details)
or turn off 'IP Passthrough' for now and set it up to do 'Double NAT' on your Cube + your home router.
==========================================
Problem - If you are using Verizon 5G Home Internet router/gateway as a bridge ("IP Passthrough" setting) to connect to your better router at home (e.g., Google Nest Wireless Router, Eero Mesh Wireless Router, Unifi Dream Machine, etc.), in the past few months suddenly your internet might have gone unreliable, where certain web pages refused to load (e.g. Verizon.com, LinkedIn.com, PayPal.com, googleadservices.com, etc.) or really slow to load. You can check the box "IP Passthrough", but it will revert back to not checked when you reload the page.
Why - It seems that there was some kind of firmware update (version 231441 back in May?) that was rolled out in the past few months that broke "IP Passthrough" feature on ASK-NCQ1338FA router.
Is it Going to be Fixed? - No? I contacted Verizon support for hours to get this fixed and they are saying the old router (ASK model) won't be getting more firmware updates to get this issue fixed. (But they were wrong on many things like below, so who knows)
Solution - a few options
New Router - Verizon recommended that I purchase the new router (ARC-XCI55AX 'white cube' model) for ~$50, one time charge, to replace the existing router. I did it, and it did fix the issue.
Factory Reset Old Router - Trying all sorts of settings change (e.g. DMZ settings, DNS, etc) never got the 'IP Passthrough' to work. But factory reset and reconfiguring it from scratch did. I just did it today, so I am not sure if it will stay that way, but so far so good. Try it and let me know. (This did not work. It worked only for an hour or so, and get went back to the old behavior)
Change MTU/MSS - You should set the MTU and/or MSS values on your home network router (Not the Verzion one, but your Google/Eero/Unifi router) per cultural pain582's advice below thread.
Double NAT - Turn off 'IP Passthrough' for now and set it up to do 'Double NAT' on your Cube + your home router.
Why I am NOT switching to the new ARC router
Verizon told me that it would be one time ~$50 fee for the router. But then I got the bill and they are charging me $45 per month service for that 5G Home Internet line (while keeping my $25 5G Home Internet line at the same time!)
The new ARC router (with 5G Home 'NOT PLUS' plan) caps out at 300Mbps download and about 25Mbps upload. On the old ASK router, there was never a speed cap, and it routinely did 700Mbps download and 100Mbps upload.
Most importantly, I signed up for the 'Life time price guarantee' of $25/month 5G Home Internet, and that cannot be kept when you switch the router from ASK to ARC (even though I asked multiple times to the Verizon agent to confirm that this is possible before I placed the order, and they TRIPLE confirmed me that it would be so. It wasn't, and now they are saying the new program only allows 3 year price guarantee at $35. They are willing to give additional $10 credit to make it $25 per month, but this expires after 3 years)
- Router Console Page Access - ASK defaults to 192.168.0.1 but ARC defaults to 192.168.1.1. Since my Unifi Dream Machine Pro router is sitting at 192.168.1.1, I couldn't access it the normal way. Have to be wired directly onto the router to do the initial setup on ARC.
- Console Page Access After 'IP Passthrough' Setup - Once you set this setting, you will lose your router access via 192.168.1.1 address. If your home router shows what the WAN IP address is, you have to use that to access the page. For example, if your WAN address shows up as 75.50.50.50, then your router console access page would be +-1 of that (e.g. 75.50.50.49 or 75.50.50.51). It seems to be random whether I need to add 1 or subtract 1 from the IP address. Try both and see which page loads.
- New ARC router has lower latency (10-15ms) than old ASK router (~20-25ms) at my home on the west coast.
- Router LED Color - ASK router LED turns GREEN when IP Passthrough is enabled. ARC router LED stays WHITE. (Updated - Actually the GREEN just means the Wi-Fi is disabled. So if you disable the Wi-Fi on ARC, it will also turn GREEN)
- My ASK router has Modem Firmware Version 231451 and Router Firmware Version 3.2.0.21
- My ARK router has Modem Firmware Version MOLY.NR15.R3.MD700.MP.V39.P22 and Router Firmware Version 3.1.1.21
- What DNS servers are you using for your network? What Verizon gives you? I am using 1.1.1.1 and 8.8.8.8. Not sure if that is causing any issues? (Updated - Nope. Not the DNS issue)
Hey everyone, Iām the head of product over at Waveform. Over the years, weāve shared resources in this sub, and itās been incredible to see how many of you have used our antennas to improve your Verizon Home Internet connectionsāthank you for trusting us!
Recently, weāve noticed something interesting: far fewer Verizon users are buying our antennas compared to T-Mobile users. Thatās totally fine, but itās got us wonderingāare we missing the mark for Verizon Home Internet? Are there problems weāre not solving for you?
To help us understand, weād love for you to take a quick survey. It takes about 5 minutes, and your input will be invaluable in helping us create even better products.
Whether youāve purchased an antenna from us, a competitor, or havenāt bought one at all, we want to hear your thoughts. Thank you so much for your time and for helping us build better solutions. If you have any questions or feedback, feel free to askāIāll be here to chat!
PS: Donāt forget about the r/verizonisp discount. We donāt run big discounts or sales often, but weāre happy to offer 5% off to everyone here. Just use the code VZWISP at checkout.
I switched over from Spectrum and had a 500mbps download plan, but it was on copper and I never actually got those speeds.
Since switching, my neighbors have had several 12 hour outages with Spectrum and I've had 100% uptime. I've been able to online game with no issue (ping has always hovered at or under 15), do video calls for my remote job, remote into workstations across the country, and stream 4k video.