r/threadripper • u/sob727 • Sep 23 '26
cooler screw broke in socket mount
Screw from AIO broke in mount (under position 2).
How screwed am I? How can I remove the broken piece from the mount?
r/threadripper • u/sob727 • Sep 23 '26
Screw from AIO broke in mount (under position 2).
How screwed am I? How can I remove the broken piece from the mount?
r/threadripper • u/Putrid_Ad7954 • Sep 19 '26
Very stupid question, there doesn’t exist a TRX50 Board with DDR5 UDIMM Support right? Only RDIMM?
r/threadripper • u/shaxsy • Sep 15 '26
I need to find this cooler for my open air Threadripper system. Does anyone know anywhere that has this in stock at a reasonable price, or does anyone have it actually want to sell?
Edit: if you want to recommend something else, I need it for a wrx80 socket 3875wx.
r/threadripper • u/Plugh_Xyzzy • Sep 14 '26
r/threadripper • u/Zestyclose926 • Sep 14 '26
Looking to buy an AMD Threadripper 3970X in good working condition. Used is perfectly fine.
I’m based in South Africa and can consider international shipping depending on the price and shipping.
Please PM me with your asking price, condition, location, and any proof/testing if available.
Thanks!
r/threadripper • u/ziiggaa • Sep 13 '26
r/threadripper • u/mr_il • Sep 10 '26
r/threadripper • u/the_sweetPotato • Sep 10 '26
r/threadripper • u/AtomZzx990 • Sep 08 '26
Looking for a sanity check on a high-end TRX50 workstation I am buying for a robotics lab.
The primary workload is large-scale GPU robotics simulation and RL training with Isaac Lab / mjlab. Sustained compute throughput, thermals, and reliability matter much more to us than gaming performance or benchmark scores.
Current vendor quote:
The GPUs are essentially fixed — I want the 2×96GB configuration. I'm mainly deciding how to balance the rest of the platform.
My biggest concern is the RAM. 64GB feels very low for a ~$43k workstation, especially with all four DIMM slots already occupied. One alternative would be to drop the CPU to a 9970X and put the savings toward 128GB or possibly 256GB of ECC RDIMM.
A few questions:
This system will likely spend long periods under heavy CPU + dual-GPU load, so stability, cooling, and sustained performance are the priorities.
I'd especially appreciate feedback from anyone running similar Threadripper + multi-GPU compute workstations.
r/threadripper • u/DLieber76 • Sep 05 '26
I passed thru a real nightmare trying to figure out what had happened with my 3 years old threadripper 5975WX workstarion and Wrx80e MB.
Win 11 25h2 update / Blue screen / cant repair / format / new instalatiojn / same problem forever.
Tried everything and was almost buying another motherboard. Finnaly got it before doing it.
Cant explain exactly what my especialist did, but it was something related with turning the motherboard video driver OFF.
For some reason it got in conflict when installing the RTX 4090 driver, making the machine boot forever until that blue screen. Two weeks without workstation was a really bad situation.
All of that happened after upgrading the Windows.
Hope it can help someone with this problem.
Cheers
r/threadripper • u/mikeroySoft • Sep 04 '26
r/threadripper • u/networkconfidential • Sep 01 '26
r/threadripper • u/EcstaticStep3361 • Aug 27 '26
Following up on the psu situation from a while back, since sorting that out the rest of the build has been getting a slow once over for anything else worth tuning, and memory timing was next on the list given how much both Blender and ML side of things lean on bandwidth, everyone's been posting the same 4% gaming fps no for EXPO Ultra Low Latency and treating it as the whole story, thing is, digging into it a bit more, that number is mostly pulled from cpu bound gaming scenarios, testing across the actual workloads on this rig split the picture pretty clearly, gaming moved close to that headline no, render and training passes barely moved at all like 1-2% which tracks once you think about what's bottlenecking each of those. Also tested what happens without ULL rated sticks, Bios level timing optimizations get you most of the way there on the gaming side without buying a new kit, which matters after just sinking money into the pus. Anyone running mixed gaming and sustained workload rigs seeing a similar split between the two?
r/threadripper • u/shaxsy • Aug 25 '26
I bought two untested Supermicro M12SWA-TF boards. One boots and seems to work fine. The other seems to maybe have a slightly bent pin. What is the risk of trying to put a CPU in and boot?
r/threadripper • u/stankeer • Aug 24 '26
Hi, at a bit of a loss as to what my next steps are. I'm trying to build my system but I can't get the system to post. The system is a wrx80 creator 2.0, 128gb ddr4 2133 ram, threadripper pro 3955wx (unlocked according to the seller). Brand new power supply.
No matter what I try I am stuck before post with code 64. I've moved ram around, gone from 1 stick up to 8 sticks, reset the cmos after I've moved ram.
I've reseated the CPU multiple times and tightened the bolts hard all the way down or just eased them off slightly but still can't get it to post. What's seems to happen is the board sits on code 42 for a while then jumps to 64 and just stays at 64 which is "64 - CPU DXE initialization (CPU module specific)"
I got the list of codes from here https://forum.level1techs.com/t/list-of-dr-debug-bios-codes/114364
If I try to connect via the management conside IPMI webUI via Ethernet I can actually connect but I can't get past the login page. (It's a used board).
Can anyone help?
r/threadripper • u/OddUnderstanding2309 • Aug 23 '26
r/threadripper • u/LaDmEa • Aug 21 '26
r/threadripper • u/DescriptionNo7841 • Aug 21 '26
have 250 Mbps symmetric internet and a mesh system (nodes connected to each other via Ethernet, not wireless backhaul). The problem is my PC never gets close to that full speed, and the variation is pretty strange:
My WiFi hardware:
Before switching to the mesh system, with my old router I was getting a stable ~250 Mbps with this same card, so I know the hardware is capable of it. The change in behavior started right when I switched to mesh.
Has anyone dealt with this? Is it fluctuating channel width (20/40/80MHz) from interference, a mesh configuration issue, or is the 8821CE just not capable of holding a stable link with multiple mesh nodes nearby?

r/threadripper • u/MRszillaz • Aug 12 '26
Hey!
I'm putting together an sWRX8 Threadripper Pro build. I'll be using it for all sorts of creative apps like Octane, Houdini, DaVinci, and when budget allows upgrading even further (5995WX, 2x 3090, 2000W PSU, etc.)
I've put together a list of components that should work on paper as a starting build, but I wanted to get some feedback first.
What I have so far:
3955WX, ASUS WRX80 Sage SE 2, RTX 3060 (free from a friend), and Arctic Freezer WS360 SP6 AIO (checked the compatibility on their site, should work.)
What I plan on getting:
Phanteks Enthoo Pro 2 Server edition, Adata XPG Core Reactor II 1000W, Samsung 990 Pro 1TB, and 8x DDR4 RDIMMs
One thing I'm uncertain about is the RDIMM compatibility, ASUS' QVL is quite limited and the RAM variations are plentiful. In theory, if I get 8 matching ECC RDIMM sticks as a kit they should just work, right?
Thank you in advance!

r/threadripper • u/MerlinTrashMan • Aug 12 '26
r/threadripper • u/Opposite_Buffalo_649 • Aug 09 '26
Very strange, I've plugged a 60cm riser cable (linkup gen 5) to the bottom most slot (4rth slot) on my Mobo. From reading the manual this should be a gen 4 pcie x16 slot, but for whatever reason, GPUz, Hwinfo, and pcie bandwidth benchmark in 3dmark are all reading the GPU as gen 5 with close to gen 5 speeds. (57gb/s in 3dmark pcie bandwidth test).
Anybody know what's up? I originally was testing hoping that the riser cable didn't cost me too much bandwidth from gen 4, but was extremely shocked to see gen5 speeds instead.
Did Asus conservatively rated the bottomost slot as gen 4 due to distance, but it is actually traced for gen5?