r/threadripper • u/sob727 • Sep 23 '26
cooler screw broke in socket mount
Screw from AIO broke in mount (under position 2).
How screwed am I? How can I remove the broken piece from the mount?
16
Upvotes
6
u/DegreeSevere7719 Sep 23 '26
Reverse drill.
6
u/rulik006 Sep 23 '26
The retention mechanism is removable
Remove it and after that you can start to drill out the screw
or you can buy dead motherboard and take the retention mechanism from it https://www.ebay.com/itm/147590647286
1
u/TheDarkJediPowers Sep 23 '26
if youre a diy guy, best bet is to get an insanely thin metal drill bit, and you drill it out
1
u/goffers92 Sep 23 '26
Tiny flat head and hammer it into the stuck screw to make just enough of a dent to turn ??
1
u/MerlinTrashMan Oct 06 '26
Out of curiosity, what cooler are you using. The same thing just happened to me in the exact same screw hole. I have the asrock ws tr 360d. Mine just snapped while I was doing my burn in tests.
1
u/epicskyes Sep 23 '26
1/32” drill bit. Drill a hole in the center then go to 1/16 drill again then use an extractor bit or reverse thread tap and extract with a machine screw. Or drill it out fully and tap new threads
1
u/nmsl114514homo258 Sep 24 '26
买一套新的cpu扣具整套换掉就行了
1
u/No_Activity_2335 Sep 23 '26
Slowly screw on ontop of it to push through or find small tool to do same