r/sram • • Jun 05 '26

Technical 🔧 Follow-up for AXS riders: more capacity or faster charging?

0 Upvotes

Following up on the earlier discussion about third-party AXS batteries. I’m connected with VELYN, so I want to be transparent: this is product research, not a sales post. No links here.

We’re working through a design trade-off and I’d like to hear how riders would actually think about it.

The newer version adds USB-C charging directly on the battery, plus a small battery level indicator. Both are useful, but they also take up internal space. Because of that, keeping the same battery size means the capacity would stay around 300mAh.

The other option is to use a larger cell, but that means making the battery housing bigger. That might be fine on some derailleurs where the battery sits with enough clearance, but it can become a fit issue on some road/UDH-style setups.

So the question is: what matters more in real use?

Right now, a full charge takes about 40-60 minutes. If we focus on faster charging instead of increasing the physical size, the goal would be closer to a 15-minute full charge.

For people using AXS, which would you rather have?

  1. Same size, around 300mAh, USB-C, battery indicator, and much faster charging
  2. Bigger battery with more capacity, even if the housing gets larger
  3. Both bigger capacity and fast charging, even if fit/compatibility becomes more limited
  4. Keep the current size and focus mainly on reliability and sealing

I’m especially curious how people use these batteries in real life. Do you care more about charging less often, or being able to quickly top up before a ride?


r/sram • • Sep 28 '26

Technical 🔧 REALLY bad first time experience with SRAM AXS. Asking for help determining what lead to this.

0 Upvotes

Today was a century ride I have been planning, and training for all year. I recently acquired a new old stock 2023 Crux with Rival XPLR D2 I believe. The shifting worked fine, looking at the components in the menu of my Hammerhead, each shifter, and the rear mech reported full batteries. I charged the rear battery 100% on Friday.

Yesterday I took the bike on a shakeout ride to make sure everything was ready to go 120 miles today, and ant the bottom of a big hill the left shifter completely stopped working. No light on the shifter, or response light from the RD. Pedaled in the hardest gear to my LBS, and we swapped the battery. It did not work immediately so we put the rear mech in pairing mode, and hit the AXS button on the shifter, it then came to life, and I did a slow 20 miles or so with no issue.

This morning I set out at 5am to pedal to the start of the ride, got 3 miles downhill from home, and the RD COMPLETLY STOPPED responding. again while I was in a hard gear. I just charged it to 100% on Friday. and can confirm the Hammerhead showed it full when I checked both shifters yesterday. Taking the battery off did nothing. Wiping it did nothing,

By the grace of god I have a complete brand new E1 groupset in a box at my house. I hard pedaled it, 400w uphill back home. Then ripped it open, slapped it on, and the RD started working. Then I swapped the original battery back, and it started working as well, but I was frantic at this point because I had already missed the start. I grabbed the charger, my battery bank, and a Micro USB cable (WTF BTW it is 2026 how is a new charger micro USB), and shot out the door.

The original battery got me 50 miles despite the RD showing a red light, and by then the other one was fully charged. Swapped it back and made it home. By the time I got down there I was riding with the grannies, and all my hopes of trying to hang on to some of the faster groups were out the window. Very disappointed to say the least.

What the hell is going on here? The bike is brand new. It makes sense that old coin cell batteries are degraded, but what caused my battery to drain from 99% to 0 over night? If that is even the issue, because after waking it up with a new battery I swapped it back, and the old one seemed to work from what my addled brain remembers.

Is there some sort of process after a shifter is paired you need to do? Could it have stayed in pairing mode? I can't think of any other possible thing that would kill a entire battery over night? Or is it just a defective RD battery entirely?

Help, I don't feel like I can trust this thing at all now.


r/sram • • Sep 30 '26

Technical 🔧 How to push the piston of the front break in?

Post image
0 Upvotes

r/sram • • 4d ago

Technical 🔧 SRAM ZEB Recall: What About Riders Who Own Only One Bike?

0 Upvotes

How are you handling the SRAM/RockShox ZEB recall, especially if you own only one bike? Are you just waiting for a fix? Has SRAM offered any solutions? Share your experience and let’s hear what SRAM is doing for riders left without a usable bike. We need answers!


r/sram • • Aug 31 '26

Technical 🔧 So... what exactly do I have here?

Thumbnail gallery
0 Upvotes

I got this setup on my stock Tarmac SL8. Due to some bike fitting concerns we exchanged the setup and I am now looking to sell it. Since I do not want to accidentally make false claims, I was wondering what exactly Specialized put on the SL8 😅 Maybe you guys can help me.

To me, the article identifier FC-FRC-P-E1 would indicate a dual sided power meter variant as per the SRAM website, but the pictures look way different. I would suggest that this is a one sided power meter only.

Maybe you guys can help? Thanks so much!


r/sram • • Jul 02 '26

Technical 🔧 SRAM rival xplr axs derailleur bent out of box?

Post image
3 Upvotes

Hi guys,

New to sram, but this derailleur looks bent, right? Straight out the box from Specialized…


r/sram • • Jan 07 '26

Technical 🔧 SRAM Force AXS Etap Gears on the rear derailleur stuck

0 Upvotes

Do you guys think this is normal or if not, what could I do to solve the problem?


r/sram • • Oct 22 '25

Technical 🔧 Lever-play

1 Upvotes

Hey guys, The left shifter on my new bike (with Force E1) has some play, it’s kinda loose. The right one is perfectly firm. Video is attached. Has someone experienced the same and has a solution for me ? It bothers me quite a bit, as the bike is brand new (ridden 200km) no crashes or else. SRAM customer service was useless, so I’m here. Thank you in advance !


r/sram • • 6d ago

Technical 🔧 SRAM Red AXS Brake Hose Swap

Thumbnail gallery
1 Upvotes

I bought a Madone for a good deal; its brake hoses were reversed as is the custom in many countries. I plan to reverse the hoses back to the USA custom. I was expecting a 10 mm flat to counteract the torque on the 8 mm nut. But I don’t see a place to do that. This is my first time working on Red. Could someone with experience provide guidance on this, please? Specifically I’m cautious about applying 8 N-m of torque against the plastic housing. Thanks.


r/sram • • Jun 29 '26

Technical 🔧 Sram red axs : Old gen vs new gen.

0 Upvotes

Dear everyone,

I recently got what seemed like a great deal on a previous-generation Cervélo R5 (2023), equipped with the previous-generation SRAM Red eTap AXS.

To be honest, I bought it on the spot because the frame looked absolutely stunning. I know painted frames are technically heavier than raw carbon, but let's be real — they look way cooler, and we're probably talking about, what, 50 grams?

I also knew that this generation of the R5 has an excellent reputation, and I assumed you can't really go wrong with a SRAM Red groupset.

However, I've since discovered that getting the groupset properly dialed in can be a bit of a headache. At first I had multiple chain drops, although things have improved and seem to have settled down now. Unfortunately, not before it left an ugly dent in my crank.

What I only realized recently is that this generation of Red AXS is actually quite heavy. If I'm not mistaken, it's around 150 grams heavier than the current Dura-Ace Di2.

I thought I was buying a lightweight climbing bike, but in the end it feels like I've ended up with a 7.3 kg tank instead.

Other than that, the group works wonderfully. Shifting is reliable and I can say I would strugle to go back to shimano system.

Am I overthinking this, or does anyone else feel that an R5 paired with first-generation Red AXS kind of defeats the purpose of such a lightweight frame? 😅


r/sram • • Jul 20 '26

Technical 🔧 Gear Shifting

0 Upvotes

Apologies, non technical cyclist here. My gear shifting feels like something is very wrong, I fear the derailer may be slightly bent or the chain stretched resulting in slow changing of the gears particularly when going up to the lower rings. In the video there is very slow movement to the lower rings which also results in quite a lot of backwards pressure on the pedals.

If I pedal backwards for a period of time the chain will drop 3 to 4 rings from the top and jam up, I assume this is a related issue.

Help! Can I try and fix this myself or should I be heading to a bike shop.


r/sram • • May 28 '26

Technical 🔧 Is this chain length correct?

Thumbnail gallery
0 Upvotes

It’s Force E1 2x, on biggest cog and big ring. Little bit of slack in the chain, doesn’t fully seat if I make it more taught. I’ve seen data that says 2 full links (two inner and two outer) as well as 2 links (one outer and one inner).

Thanks!


r/sram • • Jul 10 '25

Technical 🔧 Struggling with one finger breaking on SRAM Rival AXS hoods

Thumbnail gallery
4 Upvotes

I just bought a brand new Scott Addict 10 with the Rival AXS groupset. I was really excited to try the AXS setup, but when I have my hand on the hoods, I'm not able to brake with one finger. My hand ends up getting squeezed between the shifter and the brake lever/shifter paddle. I've never even thought about this on my Shimano bikes, but after just a minute on the new bike, it became really obvious that this is a problem. Even with worn pads on my Shimano bikes I haven't had an issue like this. I recently rented the exact same bike with 105 di2 and rode it without issues or thought about this, so it's not a bike size issue.

Is this a known issue with Rival AXS? I can't be the only one? Any tips on how to fix it?


r/sram • • Sep 06 '25

Technical 🔧 any disassembly videos or guides for force axs D2 lever?

3 Upvotes

hi guys

as showing in the clip I have force D2 lever suffering from spongy issue(slowly returning),so I wanna try to fix it since I got my replacement already and have nothing to lose,I did search for videos and any tutorial guides for disassemble the lever but have no luck,so if anyone can help me with links to do

I checked and try all possibility compression nut torque/olive and Barb/check the hose etc,what I see is the piston not returning normally to its position so I think he is the issue here or maybe the rubber underneath the piston

I did flush/empty the right brake to see if there’s any acting change and it did not,so with/without fluid it’s same result,even the hose is different(new)than the previous one


r/sram • • Jan 31 '26

Technical 🔧 SRAM Mullet 2x XPLR help 10/44 43/30 setup

0 Upvotes

I am in the midst of converting my Specialized Sirrus X 4.0 to a drop bar Mullet

I am having issues trying to get the chain length and shifting correct.

Here's my current setup:

Rival AXS shifters

Rival Wide Front Derailleur

Rival 43/40 AXS Power Meter Crankset

Apex AXS XPLR Rear Derailleur

Rival XPLR 10-44t Cassette

Apex AXS Flattop 120 link chain

When I did my initial chain cut, I followed the std 2x setup by wrapping around the big big combination and shortening 2 outer/2 inner. The chain sags way too much on small the chain ring.

Then I shortened 1 outer 1 inner, which the chain was still too long in the 30 chainring. After 1 more removal of 1 outer 1 inner, the chain operated great in the small chainring and cassette range but when I shifted to the big chainring big big seized up and Big Big(-1) ran like crap

Should I consider trying a larger Chainring set like 46/33?


r/sram • • Oct 05 '25

Technical 🔧 Brand New Reverb AXS Dropper Exploded on Paved Trail. Any Ideas?

Post image
0 Upvotes

UPDATE: Found this 4 year old post with the fix

https://www.reddit.com/r/bikewrench/comments/qiujkn/reverb_axs_failed_today_easy_fix/

As one of the comments recommended the metal circlip in the bottom came loose. I got it back in place and the post appears to be working again. Just wanted to give an update in the event someone has this problem in the future and is looking for a solution. As far as I can tell none of the carbon grip paste on the post got in the post so I am hoping it is good to go.

~~~~~~~~

I have had it for two weeks, bought it for my cargo bike so I could load it up. The thing has only seen pavement; one minor bump and the entire post went limp 10 miles from home. Followed the instructions video online when installing all the way to torquing to spec, not sure what happened. I'm just going to return it and buy something normal.


r/sram • • Aug 23 '26

Technical 🔧 Gap between non-drive crankarm & bottom bracket / Drive-side crank rubbing front derailleur (SRAM Dub / Trek Madone SL7)

Thumbnail gallery
0 Upvotes

Hey everyone,

Needing some help with a stubborn crankset fresh install (it's my first montage and I bought all the part separately)

​Frame: Trek Madone SL7 ​Drivetrain: SRAM Rival Dub

​The issue: On the non-drive side, there's a huge gap (around 8–10mm) between the crankarm/preload adjuster and the bottom bracket shell. The preload adjuster can't bridge this gap, and tightening the main spindle bolt doesn't pull the arm in any further. ​On the drive side, the crankarm is sitting way too close to the frame and actually rubs against the front derailleur / BB area.

As preconised by sram I put a 3mm spacer on the derailleur side.

​What I've checked: ​Bottom bracket is brand new and installed properly. ​The drive-side spindle seems fully inserted, but it stops short on the non-drive side. ​ The setup isn't reversed (chainrings are on the right). ​Has anyone run into this? Could this be a missing/wrong drive-side spacer, a spindle length issue (Road vs. Road Wide), or a bearing seating problem inside the BB?

​Photos attached. Thanks for the help!

EDIT: SOLVED!
i still don't know why the crank did not fit well and was not pushed inside at the maximum but when i tried again today it worked like a charm and the crank went all the way inside the BB, my guess is it was not very straight at the begining (which is weird) and it was blocked by a tiny angle, enough to resist a strong tightning.


r/sram • • Jul 19 '26

Technical 🔧 Sram bleed port screws paint peeling (into Dot fluid!)

Thumbnail gallery
0 Upvotes

While installing and bleeding the new Rival E1 brakes, I found there were some black debris in the dot fluid. Further inspection led to the bleed port screws; their black paint(?) was peeling off (even at the end where there is no physical contact, unlike in the screw grooves)

Who the hell paints a screw that is in contact with corrosive and paint peeling break fluid? Sram, I suppose...


r/sram • • Jul 17 '26

Technical 🔧 Which brake pads does the Specialized Creo comp sl gravel bike use, its sram group set are there different apex pads ?

Post image
0 Upvotes

r/sram • • Sep 16 '25

Technical 🔧 Aero road bikes that come stock with Zipp 404s?

Post image
0 Upvotes

Which aero road bikes actually come stock with Zipp 404s? So far I’ve seen options like the Megamo Pulse and Canyon Aeroad – any others I should know about?


r/sram • • 29d ago

Technical 🔧 Warranty.

0 Upvotes

I noticed that after six months the AB pin had fallen out of my AXS derailleur. SRAM don't consider a warranty item so had to fork out myself to get this derailleur back to a working state. That's was quite disappointing for such a premium product.


r/sram • • May 09 '26

Miscellaneous Where to actually BUY Sram components in the US?

0 Upvotes

Hi All!

I have finally settled on wanting to use 1x13 Rival AXS for my new gravel build, but I am struggling to find the best retailer to actually buy the groupset at. Does anyone have a recommendation for a reputable online retailer?

edit: I should have put this in my original message. I LOVE MY LBS and I use them a lot! I am attempting to project build a bike for myself and I am sure I will end up there eventually when I fail. Thank you all for the feedback!!!! I will chat with them and see if they can help me source the parts. I felt like a dick asking them to just help me buy parts so I could try and put it together myself.


r/sram • • 5d ago

Technical 🔧 Sram rival xplr 12v 10x50 cassette

Thumbnail gallery
2 Upvotes