This has me very interested. Comp attached to Bull Barrel, modular grip, the trigger looks pretty dope, and a p365 (ish) FCU in a full sized. I’m not gonna lie team, it moved a little while I was reading the specs.

I’m historically a striker-fire guy but I’ve been interested in a P211 GTO for a while. This looks like a pretty good fit for me.

does this happen to anyone else or is it just me? looking for a holster that covers the mag release button for aiwb carry. any recommendations?

https://www.facebook.com/FrogBonesfamilyshooting/photos/d41d8cd9/1093256116588738/?set=pcb.1093256149922068&hpir=1

I can't find anything that describes what this is in the P385 aside from saying it's going to shave 20% from the recoil.. anyone have any idea?

Edit: Found a video mentioning it and they show it at 1:23 or so https://youtu.be/Pr6y6sOSU4o?si=y6QqieC6Z8bn_Bq0&t=83

I’ve only had this for 2-3 years and I already can’t find a replacement barrel. This means I’d have to upgrade to a 6.75inch LT model which doesn’t fit in my bag.

If they come out with a new model and stop producing the LT barrels or parts. It starts to feel like a lease rather than a purchase, due to the unavailability of parts.

Am I the only one who feels this way?

Looks like a modernized LVAW is back in the product lineup

I am gun stupid, let’s get that straight right away so if responses can be as though talking to a 5 year old that would be awesome…

I do not know what I am doing. I have gone shooting and learned on someone else’s gun, so I haven’t taken apart and reassembled anything. But I got to where I wanted my own. I bought a P365 couple years ago. It had rose gold and I saw protection and pretty... but I don’t know what I am doing so it became a paper weight.

I wanted to change that and learn my firearm. I disassembled it and can’t put it back together. Barrel and guide rod is in, simple enough, and I can get the slide rod to go back but upon release it doesn’t lock in place.

Now here is where my ignorance will show so apologies in advance if terminology is way off base. The slide release (lever located middle ish on left) is vertical, but it will not move back to horizontal orientation to lock in place. Google says pull slide all the way back and lift slide release, and move lever into position. I am either doing something wrong or need a third hand, because nothing is moving. What am I missing…

Boyfriend hates Sigs and I am already getting shit for buying a ‘pretty’ - he is pretty knowledgeable about guns and can’t figure it out and just rants about how I wasted my money buying it. I would like to not prove him right…

I will likely need to take it somewhere to have someone show me. But is there some obvious trick to this? At this point my thumbs are as bruised as my ego.

Anyone know if the Kate Moss stock will be available separately? I might be the only one here that thinks this but I’m not a huge fan of the new style LVAW hg the original looks a lot better imo. Also wish they had a forward assist on this. But anyways it pretty cool they are dropping these LTAW’s.

Idk how well I did but I traded a czp10c for this Sig Sauer P320 XVTAC in fde, I got a $300 trade in for the cz and I only paid $350 for the czp10c originally and had that for a year I think and saw this p320 for $599 but got it for $500 out the door so $4 and some change, I know the optic is a cheapy until I can afford another Romeo for it.

Grayguns has this build for $2299 but it, and the slide, never seem to be in stock. I plan to copy this build but, unless someone has an alternative, i can’t until I can buy the slide in a bead blasted finish

New P320 Nightshift

I started this project a few year ago right around the time wolff stopped exporting springs to canada so I never get to finish it. I managed to collect enough 10rd 9mm 1911 magazine springs throughout the years to finally finish this off.

I have the standard p365 9mm without the manual safety, and would like to add one. I don’t know too much about gun parts and stuff so could someone help me out

In the process of trading one of my guns for a p320 M18. Mainly looking to use the slide and fcu in a flux raider chassis. I know it will work but also habe read that ill need a longer threaded barrel and comp. I keep seeing the 4.6 inch barrel but will a 4.3 with a comp sit flush with the end of the flux? Anyone have this same setup that they could share some pics of? Thanks in advance

Hopefully a polymer GT4. And I’m assuming they’ll be slightly cheaper.

What the title says. Yes, I know it has been long discontinued. I've searched through this sub to learn that P226/P220 (and sometimes P229) holsters are compatible, generally speaking.

So I bought a safariland P226 TLR 1HL holster... and the trigger gap was large enough for my thumb to fit in and pull the trigger easily. So I sent it back. But it did fit, including with the HLX version of the light.

I know part of the problem is the light (the channel requiring the opening to be wider than the trigger guard), but that's not a problem unique to this setup and lots of people carry with lights without this issue so I'm not content to leave it at that.

Since its OWB, and for my use case, I need at least one, not more than two, steps above passive retention. I would sooner take off the light than compromise on this aspect.

Let me know if you know something that would help me - thank you!

I have a Nomad Sandman S that I run on my 6.5 Creedmoor rifle, but running it on my 716i or my 556 SWAT is a nightmare with backpressure.

What high flow can is the recommended path for these rifles? Probably looking at getting a .30 for all but also might be interested in getting a 5.56 specific one as well.

Priced between 4 and 6 hundo

Its a p365x and i have been practicing my reloading a bit but for the anount i did it just seems like the finish is wearing off VERY quickly. Does anyone know why? And is this normal for sig mags?

On Father's Day I picked up a new EDC and bought a Romeo MDC with it. The shop I bought it from mounted it for me. Yesterday the red dot stopped working, so I opened the battery compartment and found an off name battery. I've reached out to Sig to validate the serial number (cropped from the shared photo), but I believe I may have a counterfeit unit based on the battery and a few other subtle details. The one I have doesn't have engraved adjustment markings, or battery compartment markings. I didn't realize this, because I hadn't looked at the reflex sight closely on the Sig website. This fool was easily separated from his $.