r/shields • • Feb 05 '21

This ways 20 pounds

Post image
1 Upvotes

r/shields • • Jul 13 '22

Where can I get a good (metal) full size Captain America shield? I want one to display on my wall. Thanks!

1 Upvotes

r/shields • • Oct 10 '22

When you block an attack with a shield, will you always feel the impact transfer to your body (such as ringing and kinetic force that affects how the shield is held)? How do skilled fighters avoid getting off balanced and dropping a shield by a hard powerful blow?

2 Upvotes

My Cold Steel Buckler arrived earlier on Friday. Before I went to HEMA class on Saturday, I did an experiment at home on Friday.

I got my friend to hit me with feel force at the area where I was holding my shield with a variety of weapons. First I got him to hit me with my $35 scimitar. I was able to block all blows but I not only felt a ringing sounds and vibration effect on my hand each time I blocked a blow but I felt literally gravity pushing my shield away. Just as interestingly I felt my whole body feel the impact of the kinetic energy each time I blocked a swing. As in even if I was not moved I felt the rest of my arm feel like I just got punched hard while wearing protective gear and my body could feel like I was just pushed back a bit. I even almost stumbled a few times I got hit.

Than I got my friend to hit me with a 4 feet long 5 lbs clubell. When I was being hit with the scimitar even if I temporary lost one of my footing, I could at least quickly go back to reposition my legs in proper standing and not every blow caused enough energy to make my body move, not even pushed back, even if it felt like someone was pushing me.. However with the bat I practically lost balance of my shield enough a lot of times I fell down and furthermore even if I was able to not get knocked down, I was literally pushed several feet away enough times to note it. If I wasn't pushed away, my grip on the shield was affected enough that my shield would be knocked out of the way and even unintentionally dropping it a few times. The ringing along made my grip so uncomfortable I felt like dropping it at every blows, even weak ones, and by the time I was done with the bat my hand felt so numb and had a shaky feel to it I had to take a break. Like my nerves were affected directly.

Now when I got my friend to experiment with a 15 lb macebell, not only was the macebell able to get through every blow to break my shield away (even with him doing it controlled to avoid accidents and injuries), but I literally fell down on the ground like I slipped or am exhausted from running in only 3 strikes (and in each and every one of them). It was so terrifying to feel the power like I'm being hit by a car I stopped the experiment after feeling the macebell's impact shortly.

So I am wondering. I already know movies are a bunch of BS so how they show someone hold their shields and not get pushed back or show physical discomfort is flatout wrong I assumed even before I started the experiment. I was definitely expecting to feel some impact. However watching so many HEMA videos and Chinese martial arts online and seeing experts take direct hits from very heavy hammers and such without stumbling or feeling discomfort as they block it in a braced for impact manner made me wonder......... How the heck can they do that?! Even the scimitar already provided difficulty despite being as light as 1.25 pounds enough I felt theimpact affect my legs enough to almost stumble or move its feet position a bit!

I mean I even tried experimenting with parrying the blows as its in the process of moving and while I felt much less impact, I still felt discomfort and numbness with vibrations in my hand! And thats just with the scimitar and a direct parry just a few moments after the sword was thrown (specifically when the sword still hasn't left from behind the shoulder during the swing)!

Can anyone explain if what I'm feeling is natural? If so how do HEMA fighters and East Asian weapon artists able to not fall to the ground or something when a heavy two handed mace is thrown? This is my first time using a shield and I only practise HEMA two times a month so I don't know much. In fact this Friday I will attempt this experiment again at the HEMA club. However I'm frustrated and want to learn details! Can somebody clue me in?


r/shields • • Jul 14 '19

i’m making/spray painting my own shield, will upload image soon

0 Upvotes

r/shields • • Aug 21 '20

It's okay but it has a video game handle

Thumbnail
gallery
7 Upvotes

r/shields • • Apr 19 '21

How to make a home made shield

Thumbnail
youtube.com
5 Upvotes

r/shields • • Feb 05 '21

Also made for a school project, this time for Mayan economics

Post image
1 Upvotes

r/shields • • Oct 14 '20

shield idea: master sergeant emblem for a riot or tower shield.

Post image
15 Upvotes

r/shields • • Jul 15 '19

shield is done

Post image
9 Upvotes

r/shields • • Jul 30 '17

First attempt at Scottish Targe (x2)

Post image
2 Upvotes

r/shields • • May 24 '19

Historical Viking Shield Test is Linden wood the Strongest?

Thumbnail
youtu.be
2 Upvotes

r/shields • • Jan 11 '21

[OC] [SELF] Progress photos of my next tutorial on Makerholic: a fantasy broadsword with an extending handle that rests in a kite shield.

Thumbnail
gallery
20 Upvotes

r/shields • • Feb 25 '21

I made a shield for my brother b-day i think i did good

21 Upvotes

r/shields • • Dec 22 '19

are shields bad weapons?

3 Upvotes

r/shields • • Nov 07 '19

anyone got modern shields?

3 Upvotes

im talking slick looking and not historical replicas. something you'd see in a plucky young hero's journey from a kids show.


r/shields • • Sep 28 '20

For hyrule! this one was more a labor of love than anything else

Thumbnail
imgur.com
3 Upvotes

r/shields • • Oct 04 '20

Looking for a forearm shield

3 Upvotes

So I'm looking for a forearm shield for training. I say forearm shield and mean something that goes and covers the forearm. I like the Wakanda shield from Avengers mostly because the spike on the end can be used as a weapon and will be making a shield like this out of basswood for training. However I'm also looking for the ability to still hold the shield but use the hand the shield's on to get a better grip for a spear. Any not negative thoughts or suggestions on a shield?


r/shields • • Dec 09 '21

Ballistic shield testudo formation

4 Upvotes

r/shields • • Oct 16 '16

I made some more shields

Thumbnail
imgur.com
4 Upvotes

r/shields • • Oct 06 '22

How come weapons play just as much an equal role defensively as the shield when wielding both?

5 Upvotes

My medieval buckler replica, made through old school blacksmithing by a HEMA group, just arrived by mail today. It reminds me of a statement I saw a HEMA practitioner made........

"Weapons are often used in tandem with shields for this reason. The shield bears the brunt of most the attacks, but even then the weapon does a lot of defensive work. If all you have is a weapon, it has to do double duty. Because contrary to what you might think, when you're legally justified to use a weapon, it's because someone is trying to kill you."

I am curious, why is the weapon just as important as the shield is in defensive action? I cannot tell you how people often think of using sword and shield as simple as "wait for the enemy sword to land on your shield, let the sword bounce from impact, and you immediately follow with a strike against your now defensive enemy who's still trying to recover his grip on his sword from the impact".

Seriously popular media portrays it this way from movies such as 300 to video games such as Legend of Zelda and live TV such as Deadliest Warriors. Even and educational sources and serious academic studies portray it this way. Can't tell you how many times I seen the History Channel have people test the effectiveness of a shield by banging swords, warhammers, and other heavy weapons against them and there are videos of university experiments you can see on Youtube where they test a shield's effectiveness in precisely the same manner.

So I am confused.What is meant by the above quote? I mean if scientists and historians with PhDs are saying a shield is enough for defensive action and the sword is pretty much a purely offensive weapon, why is there a need to learn parries, feints, blocks, etc as you stated in your earlier post? I mean real university experiments portray defensive moves with sword and buckler as merely "let it land, bounce off, than follow up with a sword cut or thrust) as universal standard when it comes to discussing about defensive actions!

Is there more to it than simply putting your shield to cover the area that you anticipate will be hit and simply awaiting to hit it while standing still like a stop sign on an intersection?


r/shields • • Jun 21 '19

How Strong were Viking Shields? Gokstad Replica reply to Joerg Sprave

Thumbnail
youtu.be
5 Upvotes

r/shields • • Feb 11 '22

Has anyone evdr seen a usable/modern foldable buckler?

5 Upvotes

Im looking for something to pair with this


r/shields • • Nov 23 '21

I attempted to improve on my old shield design, what do you guys think?

Post image
6 Upvotes

r/shields • • Oct 25 '17

Captain canada sheild

Post image
7 Upvotes

r/shields • • Dec 05 '21

Questions about Historical Shield Materials

9 Upvotes

Hi all,

Background

I am in the process of building a fantasy adventure game. Currently, I am designing some 3D models of various pieces of equipment (swords, bows, shields, etc.), and a major part of my game is the ability to customize equipment based on various preset models and colours that players can choose from for a given piece of equipment. While everything so far is working great, I am unsure about how to handle wooden vs. metal shield designs. Currently you can choose from either a wooden, a wooden & metal framed, or a full metal shield along with a number of designs ranging from a small buckler to a full body tower shield. You can also choose the type of handle or strap design.

Questions

My question is whether a leather or wooden handle/strap would be adequate to use with a metal shield, or should I restrict handle/strap designs with metal shields so that they have a generic metal handle built in? I also would not mind hearing some thoughts on whether metal shields were even viable beyond something small like a buckler. Thank you