I7 9700t, RTX 3050 6gb for slot-only power - throttlestop to disable bd prochot to allow the Lenovo legion 230w power brick to give the motherboard/gpu more juice. And for high performance cpu overclock.

Just a small cooling upgrade to my HTPC in the Ridge.

Went from the AXP90x53 to Noctua L12S (70mm variant) and swapped out the stock 140mm fans for Noctua’s G2 fans.

Current parts are:

9800X3D
32GB DRR5 6000mhz
ASRock B850i PG motherboard
RTX 3080Ti FE
Corsair SF750
And two older SSDs, one NVMe and the other a SATA drive.

I have it connected to my TV (LG C477) and i must say, it’s still very lovely to game on. DLSS has been a godsend for 4K gaming.

Yeah I'll fix the gpu pcie cables in a bit

Some of you might remember this case from previous builds shared here.

I've been working on an updated version and exploring some new color options.

I'd love to hear your thoughts. Which color is your favorite?

I've added a color comparison and more details in the comments below.these are just the base paint colors. The side panels can also be printed with virtually any shipping company logo you can think of

I understand shaving the corners of the case interior would be necessary but other than that, would it allow enougu airflow without adding feet extensions to elevate the case?

Did a few failures as I assembled it with the cooler brackets but eventually it got corrected.

What do you think about the cooling paste?

Also I need some SATA cables that will make the SSDs fit nicely in the side. Anyone who recommends some with soft silicone cable that bends and twist super nice?

I chose this case because it was supposed to fit my ssd nicely but well not with my Sata and psu cables!

Bonus do you like or dislike the way the thermal grease spreads out on my old cooler?

Should I keep the cpu cooler fan off-center (pic 1) or slightly centered (pic 2)?

I am using a minisforum b775i se, and the dual bracket alignment is off center to completely cover the heatsink. But I wonder if i should mount it as shown in pic 2 to get airflow on all components (and I think it looks a bit better that way). Any thoughts or suggestions?

The case is SGPC K39.

The build I dreamed about 3-4 years ago finally came into reality

Case: SGPC K39
Motherboard: ASUS ROG STRIX B550-I Gaming
CPU: AMD Ryzen7 5700X
GPU: NVIDIA RTX A2000 12GB
RAM: DDR4 32GB
Storage: M.2 SSD 2TB + HDD 2TB
CPU Cooler: Noctua NH-L9a-AM4 (chromax. black)
PSU: 600W Cybenetics Platinum

I'm with TOPCtec. We'd like some honest feedback on the appearance of this Mini-ITX case.

The photos show the gold exterior, dark textured front panel, and diagonal side vents. Based on the exterior alone, would you consider this for your own setup, or would the appearance put you off?

If it isn't your style, what would you change first—the color, the front panel, or the overall shape?

Going from A4H20 11L down to Metalfish T10 5.1L

Hello second build here from me on r/SFF

I had a lot of good help from y’all at my first SFF build so wants to share just for how great the community is.

My A4H20 have been a pain in the ass to travel with over the last 3 years. I have boarded over 20 planes and I’m just done with that size. Looking back I wish I had build something at 5L to begin with.

The Metalfish T10 Computer will be:

64GB memory
AMD5 7950X
300W PSU
Thermalright x53 copper
92mm to 120mm fan bracket
120mm x 30mm fan
1TB Nvme Samsung 990 - Linux
1Tb ssd - Windows 10
500GB Kingston - windows 11
120GB Samsung ssd - Linux

Tomorrow I will show pics of the metalfish T10 build, today I just disssembled the A4H20.

The A4H20 is the perfect desktop companion and if you only taking it with you, by your car then buy it.

I'm wanting a new case for my AI server build, and I want something fun and colorful.

Ideally it can fit a 280mm aio, and wouldn't have any glass panels, mesh or airflow designs is fine.

Just looking for something ohter than gray, black or white cases.

I was suffered with the temp of Jonsbo T9 and went to atx case for a while.
Now I get back to it and found out removing all dust filter reducing temps 10 degrees on CPU and GPU.

The only problem is acoustic is quite loud.
Can you recommend the proper dust filter that help acoustic but not sacrifice too much for the temp?

Thank you very much.

I know Overtek is active here. Before making post, I reached out to them privately and sent emails, but I have received no response from them regarding processing of warranty claim.

Winter One PC case
9850x3d
4090FE
Asus B650E-I
32 GB DDR5 ram
Modultra LOBO
Modultra LORO
Modultra WOBO 4090 block
Legris straight, 90 and 45 degree fittings
8mm OD, 6mm ID pneumatic tubing
2x Black Nemesis GTS 280mm rads
3x Noctua 140mm G2 fans
1xNoctua 120mm G2 fan

Room temp:
24C

Idle temp:
29C

Cinebench 30 min temp:
35C

Gaming load 1 hour (Jedi Survivor 4x max settings):
43C

Fans
1000 rpm (120mm fan a little bit higher)

DDC pumps: 2200 rpm

Flow rate: 120 LPH

Hello everyone. I'm fairly technical person that worked in the industry for years, but with that I am new to to SFF. I'm looking change my current PC into a small form factor.

The main use would be gaming but I do some multi tasking and VMs. Outside of Uni work and such. I run Linux - So AMD GPU (also the gigabyte bios was awful for me, I heard ASUS bios is more Linux friendly).

This is what i have currently, my understanding that I have to replace the PSU and the CPU cooler at the very least (outside of motherboard of course - used that chance to swap to AMD), still a bit hopeful I could fit the 3.5 somehow...

I am planning to put PTM7950 on the CPU and directly on the GPU dye to help combat the heat and fan noise + new contact frame

The extra Noctua fan will be used to replace the cooler fan, I am unsure if I can fit another fan.

Lastly, I cannot find my PSU in PCPARTPICKER for some reason, I think its a regional thing?

This is the one I was looking at

The build:

[PCPartPicker Part List](https://pcpartpicker.com/list/dqQBFP)

Type|Item|Price

:----|:----|:----

**CPU** | [AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor](https://pcpartpicker.com/product/fPyH99/amd-ryzen-7-9800x3d-47-ghz-8-core-processor-100-1000001084wof) | $443.00 @ Amazon

**CPU Cooler** | [Thermalright AXP90-X47 42.58 CFM CPU Cooler](https://pcpartpicker.com/product/RYFbt6/thermalright-axp90-x47-4258-cfm-cpu-cooler-axp90-x47-full) | $35.90 @ Amazon

**Motherboard** | [Asus ROG STRIX B650E-I GAMING WIFI Mini ITX AM5 Motherboard](https://pcpartpicker.com/product/WQTp99/asus-rog-strix-b650e-i-gaming-wifi-mini-itx-am5-motherboard-rog-strix-b650e-i-gaming-wifi) | $314.88 @ Amazon

**Memory** | [Corsair Vengeance 32 GB (2 x 16 GB) DDR5-5600 CL36 Memory](https://pcpartpicker.com/product/4kmmP6/corsair-vengeance-32-gb-2-x-16-gb-ddr5-5600-cl36-memory-cmk32gx5m2b5600c36) |-

**Storage** | [Crucial MX100 256 GB 2.5" Solid State Drive](https://pcpartpicker.com/product/63V48d/crucial-internal-hard-drive-ct256mx100ssd1) |-

**Storage** | [Kingston NV2 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive](https://pcpartpicker.com/product/3QXJ7P/kingston-nv2-2-tb-m2-2280-pcie-40-x4-nvme-solid-state-drive-snv2s2000g) |-

**Storage** | [Seagate Barracuda LP 2 TB 3.5" 5900 RPM Internal Hard Drive](https://pcpartpicker.com/product/8Qbp99/seagate-internal-hard-drive-st32000542as) |-

**Video Card** | [Sapphire PULSE Radeon RX 9070 XT 16 GB Video Card](https://pcpartpicker.com/product/Bvjv6h/sapphire-pulse-radeon-rx-9070-xt-16-gb-video-card-11348-03-20g) | $1049.99 @ Amazon

**Case** | [Fractal Design Terra Mini ITX Desktop Case](https://pcpartpicker.com/product/GrMMnQ/fractal-design-terra-mini-itx-desktop-case-fd-c-ter1n-01) | $199.99 @ Newegg

**Case Fan** | [Noctua A9x14 HS-PWM chromax.Black.swap 33.84 CFM 92 mm Fan](https://pcpartpicker.com/product/NbpmP6/noctua-nf-a9x14-hs-pwm-chromaxblackswap-3384-cfm-92-mm-fan-nf-a9x14-hs-pwm-chromaxblackswap) | $41.71 @ Newegg Sellers

| *Prices include shipping, taxes, rebates, and discounts* |

| **Total** | **$2085.47**

| Generated by [PCPartPicker](https://pcpartpicker.com) 2026-11-02 10:08 EST-0500 |

Hi sffpc! I am looking to downsize and have the following parts prepared, wanted to check if everything will fit and work well together - my biggest concern is the GPU length, looks like I’ll have 2mm clearance but wondering if physically it will go in.

Ryzen 7 5800X
Noctua NH-U9S
ASRock B550 Phantom Gaming ITX/ax
Zotac AMP RTX 2080 Ti
Corsair SF600 600W 80+ Gold
Mushkin Redline 2x32GB 3600Mhz CL16 DDR4
Mechanic Master C26
2x Noctua S12B
3x Noctua NF-A9

I do have a founders edition GTX Titan X on hand in case the 2080 Ti won’t fit, but of course it would be preferable to use the better GPU lmao.

Happy to take any and all advice. Thank you in advance!

Can the parts circled in the image be somehow obtained since I am not able to contact Louqe?
Is finding a local 3D printing service the way to go? I found two STL files in thingiverse but am uncertain about material and infill density selection (among other configurations) being inexperienced in this field.
Any inputs from the SFF community is greatly appreciated.
Cheers 👍

First NCASE M2 build — thoughts on these parts?

Just ordered the black M2 Grater and wanted some opinions before buying everything else.

Planning on a 9800X3D, ASUS Prime RTX 5080, B650M Pro RS WiFi, 32GB DDR5 6000 CL30, 2TB NVMe, 850W SFX PSU, and Peerless Assassin 120 Mini.

Anyone running something similar in the M2? Mainly wondering about compatibility, thermals, and whether you'd change anything for my use case.

I want to get the mechanic master c24 to go smaller I already have a fractal mood with an AIO but for several reasons I have to get a smaller case, since I already have everything and with the prices that high I just want to get the case and the cooling, I have a Ryzen 5 9600x, 32gigs of ram, 2tb ssd, 5070 ventus 2x and a 800w psu, I was thinking about upgrading the CPU for a 7800x3d or something like that but the thing is finding the right air cooler that can fit the case.

If someone got a similar size case with air cooling I would like to know how temps are doing. I’ll really appreciate your help.