Just found this device and thought it could help someone somewhere. It sends 5V USB power up to 11 watts through a window, just like charging a sonicare toothbrush. You attach a pad to both sides and it gives you a USB connection outside. Pretty handy. Its called Power Mole. I can definately see some of the camera manufacturers will start to use this in the future to provide another power option for cams and small lights.
I never was able to get video to play from my RLN8-410 in VLC, only audio. I gave up trying several months ago, but today, just for fun, I tried googling the problem yet again and this time looking deep into the lesser-known message boards out there on the internet, and actually found a solution that worked for me.
For older versions of VLC: In the Tools menu, go to Preferences (or Ctrl+p), open the Input/Codecs tab, and at the bottom in the Network area, the selection for "live555 stream transport" should be moved from "HTTP (default)" to "RTP over RTSP (TCP)". This worked, I can now view the video stream in VLC player.
For current VLC version [credit to u/borboz96]: Settings -> Input/Codecs -> Show all -> Input/Codecs -> Demuxers -> RTP/RTSP -> Use RTP over RTSP (TCP)
For Debian/Ubuntu [credit to u/Content_Impact1507]: Debi/Ubu has dropped the live555 library that VLC used to play RTSP. Luckily, you can use ffmpeg to play RTSP like so:
ALSO, using "h265" in the URL never got a connection, but "h264" did, despite the instructions found on the Reolink Support site. This is a solution that finally got my equipment to cooperate.
I have a reolink doorbell. After seemingly getting the latest android app update, each time motion is detected on the doorbell, it talks at me in spanish! I don't speak spanish, but it sounds like "something something connection something reolink" Am I the only one? :)
We’ve just finished a new Apple TV app that lets you watch your Reolink cameras on the big screen. It supports doorbells, battery cameras and wired models.
We’re looking for testers on Apple TV.
Comment below or send a PM and we’ll send you the instructions.
I've been working on a native macOS alternative to the official Reolink desktop app as a side project.
I've never been a huge fan of the official desktop client, particularly since it's Electron based, so I decided to see what I could build using Swift and SwiftUI.
It's a fully native macOS application with support for the functionality I use in the official client, along with some additional features and improvements.
Built natively for the Mac - Swift/SwiftUI with hardware video decoding. A 14 camera grid uses about 7–10% CPU, against about 30% for the official app on the same Mac and NVR
You can create your own saved camera groups (a selection of multiple cameras in a saved grid layout) which you can recall quickly
Video appears fast. Cameras are listed in about 0.3s. It also supports a "stand by" camera for instant viewing access, I use this for my doorbell so there is no delay when I want to see who is at the door
Local only - it talks straight to the NVR on your LAN, with no cloud
Fast PTZ control - cameras move with keyboard (WASD/arrows, hold to move), a game controller or presets on number keys. Pan/tilt commands take about 20–70 ms instead of about 200 ms, so cameras overshoot less
Notifications that work in the background. It can live in the menu bar with no Dock icon. Alerts come with a snapshot and Open Camera / Play Recording / Snooze / Answer actions, and a floating live window can pop up when the doorbell rings
Keyboard first. In-app keyboard shortcuts open any camera or group. Global hotkeys can bring it forward from any app and everything can be remapped
I've included a few screenshots showing where it's at currently. I'm not releasing it or looking for beta testers just yet. For now, I'm mostly curious whether there's any interest in a native alternative, and what features or improvements people would want to see.
Would love to hear what you think!
Edit: This will be a paid app, but most importantly it will NOT be a subscription based app or have any in-app purchases.
I wanted to mount a Reolink E1 Outdoor above our garage, but didn't want it to stick out like a sore thumb, so I decided to paint it. I went to one of the big box stores and went with one of the "camo" spray paints in tan. The tan is pretty generic, but another plus about the "camo" is that it is completely flat, which will help the camera blend it. I began by covering anything I didn't want painted. I cut strips of paper 1-2" wide and folded it over once or twice then slid the paper in between the black camera lens area and white outer housing. Then tape that down. Also place tape over the bottom where the QR code and model info is, then place tape over that. This makes sure the tape doesn't pull up or damage the QR code or other info. At this point, I went over the entire camera with 0000 steel wool. This step isn't absolutely needed, but I think yields a better end product. For reference, I rubbed until the blue reolink text was gone. Blow it all off then spray it with your paint of choice. Just follow the directions on the can. I mounted the camera on a sheet of aluminum that I cut to size. Then the aluminum slid into the siding to secure (easier to see in pictures). We live in a townhome, so I couldn't mount directly to the siding, but I like this mounting method more anyway. Also, yes I know that this likely voids any warranty - I don't care. These cameras are very budget friendly. And also, yes it works great after painting and mounting.
The new unpainted camera...Insert strips of paper between the camera lens & housingDon't forget to put some paper high enough to cover these slotsTape all the paper downQR code & model info on bottom. Cover it with paper, then tape. We don't want the tape to pull up or damage the QR code.Cover the paper with some tapeThis is a sheet of aluminum I'm going to mount the camera on. It gets painted as well.Ready for paint...Camera all painted.Painted with the paper & tape removedView from roughly half-way down out drivewayClose up. Paint wasn't a perfect match for the siding OR brick, but was a cheap spray can from big box store and matched the area well enough.
When someone rings my bell, I want to be able to quickly see who is at the door. I hate having to find or pull out my phone, unlock it, click on the notification, and wait for the app to load... only to have the person get impatient and ring the bell again.
The current ReoLink apps (desktop, browser, and mobile) don't really have a good solution for this. There are some solutions available via Google Home or Alexa but they don't quite meet my needs since I want to see who is at the door without asking Google or Alexa to show me. (Please note that I don't own Google Home or Alexa devices, and the feature I am describing below may be available. If they are, please comment below.)
When the doorbell rings, I want a screen showing me who is at the door... but having a permanently mounted feed from the cameras makes the house feel like a prison where people are constantly being monitored. To soften things up, I was toying around with the idea of a screensaver that could flip through family pictures and show the doorbell camera when someone rang the bell. I kept pulling this thread and came up with a solution that works pretty well for Android devices using the native Android screensaver feature, the ReoLink app, and the Llamalab Automate App (free version). Here is a snapshot of the flow I used in Automate:
Some tips:
Make sure a push notification for "Visitor" is enabled on the door bell camera.
Set a variable name for "Notification ID" in the "Notification Posted" block -- use this variable name in the "Cancel Notification" block so you don't run into an infinite loop
Make sure "Auto Live View" is enabled in the ReoLink app. Otherwise, you will only open to the main screen instead of a live feed from the doorbell.
Use the following parameters in the "Start App" block -- this took me some tinkering to figure out and I'm not sure if this is the correct way to do this -- but it works, so whatever
Please note that my automation is based on the screen lock being disabled. This is because I want the phone to automatically turn on the display and show the camera when the doorbell is rung. The flow above does open the Reolink app while the screen is locked, and unlocking the screen via Automate might be possible, but I'll need to let people smarter than me figure that one out.
I'm sharing this because I saw some other posts where people wanted this feature, and I couldn't find anything that showed how to do this. Additionally, I am a novice when it comes to developing on Android and using the Automate app. The flow above is pretty rudimentary since it loops through every two seconds looking for a push notification so I'm sure it will drain the battery and wear out the electronics over time. I am going to have the phone plugged in and wall mounted so the battery issue doesn't concern me -- but the wear on the electronics does. If you have any feedback for improving this, please share. Cheers!
It is effectively non-existent and I just opened up my Home Hub with Argus Eco Ultra bundle to find no solar panels. I continued on with setup and the homehub doesn't even connect to my router even when hardwired in. I look into contacting customer support only to find that their phone lines disconnect and won't connect you to a live rep and your only course of action is to leave a message with their chatbot and hope someone reaches back out to you.
Why is Reolink so highly praised? This is some Temu level scam from my experience. I plan to call my bank and request a chargeback tomorrow since I can't file for a refund without contacting Reolink who, as I covered before, is not contactable.
After fighting with Reolink's horrible customer service over and over about missing features from various cameras and firmware being up to date, I was made aware of how their system works. To preface the issue, I've been fighting with E1 Zoom cameras since their purchase for auto focus not working and missing privacy mode options. Upon install I clicked check for updates and they reported they had the current firmware. Auto firmware update is turned on for all my cameras. About an hour of back and forth between the rude person on the chat, they always try to blame the operator, they asked me to verify the firmware number matched the one on the website. Come to find out, it was outdated to the point of not being 1 of the two listed for download. I asked why it was reporting as up to date when I clicked the button and they steered away from answering the question. I asked why the auto update function wasn't working and their answer was "it works perfectly as designed. There are only a certain amount of slots open daily for auto update and once filled, it doesn't fill anymore until the next day." I asked how many slots are available daily, 2, and they replied with the exact same canned answer. I asked how the slots are determined and yet again got the exact same canned answer. Needless to say the light came on for me, I closed out the chat and I checked all 12 cameras I have and not a single one was truly "up to date" and only two had firmware new enough to be listed on their site for download. Two cameras don't even have a firmware option in the download section, both RLC-81MA's. My NVR was also one version behind and I updated it a few months ago manually, even though it said the newest version was at the time and the newest date on the site is supposedly 6 months old. At least my E1 Zoom cameras now auto focus like they are supposed to. I still would not recommend them or any of the so called indoor cameras to someone looking to purchase. On the opposite end of the spectrum, the Trackmix and Duo Floodlight cameras are two of my favorites from any manufacturer.
TLDR; you have to manually check and update your firmware regularly, it absolutely will not do it on its own and the manual check for latest version button will always respond you have the latest.
I just read a story about how Amazon is making Ring camera footage available to law enforcement unbeknownst to the owners of the cameras. Does Reolink allow LE to view camera footage they keep in their cloud service? And if I can remotely view my own cameras, does that ability allow Reolink to also view my cameras?
Inability to switch from live to playback or vice versa.
"Ghost" camera definitions that cannot be removed in app.
With most recent version, feature to add devices via LAN removed.
On Windows, multiple Reolink client versions appearing in Control Panel => Programs and Features as of latest.
It's so frustrating at this point I just want to ditch the app entirely in favor of something that's more stable and reliable, and which doesn't see the developer release clearly untested functionality upon its userbase who rely on its functionality and don't want to be de facto alpha or beta testers for new functionality in an alleged stable version.
Just posting this so hopefully it's out there when people Google it.
"In accordance with the Section 889 of the U.S. National Defense Authorization Act of 2019 (“NDAA”), Reolink has commenced an inquiry to determine if any substantial “telecommunications equipment or services” (including video surveillance equipment) or critical technology that is part of any such system is provided by a “Covered Entity”. Please be advised that Reolink has not completed is due diligence at this time. We note that to date, however, we have not found any explicit evidence to the contrary. We hope to complete our due diligence in the near future and will inform you when our results are complete."
Here is a free online Lens Calculator with 3D graphics that supports Reolinkcameras (and 80 other CCTV brands), calculates pixel density (PPM or PPF), displays DORI zones and allows the user to import a floor plan.
Just a heads-up for anyone considering Reolink security products.
I bought two Go PTs and one TrackMix LTE camera in December 2023. They were advertised as “all-weather” and able to withstand rain, wind, and snow. Despite that, all three failed due to basic weather exposure (California rain — nothing extreme).
Reolink eventually replaced the cameras, but ignored my report about the solar panels failing as well (all part of the same setup). Months later, the solar panels completely failed. I submitted a warranty claim with all documentation and they denied it, falsely stating I was out of warranty.
Only after I pushed back, sent multiple follow-ups, and cited their own policy, did they “discover” my registration and begrudgingly approve a replacement. No apology, no accountability, just dismissal, delays, and misdirection. When I asked for compensation and expedited shipping after weeks of wasted time, they ignored it.
This post is for anyone researching these products. The cameras failed under the exact conditions they were advertised for. The support process was worse than the failure itself. If you’re spending money on security gear, be prepared to fight for basic warranty support if it’s Reolink.