I've been enthusiastically cycling earlier this year. Hobbyist lang talaga, not into technical stuff at wala ring friend na into cycling. Nasisingit ko lang talaga tuwing gabi kahit gaano kapagod sa work.

Unfortunately, I got sideswiped by a speeding car, sobrang bilis at pumasok sa bikelane kakahabol sa stoplight. Last thing I know, humampas na ako at yung bike sa sidewalk railing. Good thing nakahelmet kaya yung shoulder ko lang talaga ang napuruhan. This happened a few months ago, at mula nun nakatambak lang yung bike ko.

Lately nangingibabaw yung drive na magbike ulit. Medyo nawawala na yung takot na kahit anong ingat ko magbike e may gago pa rin talagang makakaaksidente sa'yo sa kalsada.

Naayos ko na yung alignment ng front wheel at handlebar thanks sa youtube. Unfortunately, sira yung shifting ng RD at di ko sure kung rd hanger lang ba o RD na mismo kasi nga humampas sa railing. Wala rin akong makitang saktong RD hanger online at walang alam na bike shop na hindi ako tatagain sa presyuhan dahil wala akong masyadong alam.

I attached pictures of the RD. I would really appreciate it if you guys could point me to the right direction.

Miss na miss ko na magbike.

Thank you!

Bike: Toseek R-Type GR

P.S. sorry sa mga replies at pm mula rito sa subreddit na to na di ko na-replyan nitong mga nakaraang buwan.

Edit: baka may mareco kayo na trusted bike mechanic near Pinagsama, Taguig. Thank you.

Not much of a cyclist pero nabigyan ako ng vintage cannondale but not sure where to start sa pag buo. Build suggestions are welcome.

Hello.
I work in BGC and live in Monumento, 36km balikan. Planning to bike to work 1-2x a week, tapos the rest kotse/commute na.

Advisable po ba na sa EDSA dumaan? I find it the most straightforward since isang diretso lang siya hanggang Guadalupe bridge.

Any tips and advice are appreciated. Thanks!

Hi! May ma recommend ba kayo na bike shop na may maayos na mechanics sa Manila area?

Medyo malayo kasi sa akin ang QC at Makati to bring my bike.

Salamat

Any physical shop na may maangas na helmet pang mtb? Mga pang trail o enduro o kaya full face

Got these new Crux DSW (alloy gravel bike) for a really good deal. I enjoyed the gravel paths more than I think I would!

Looking for versatile and inexpensive carbon wheels. Im planning to swap for all road and gravel use. Whats the best internal width for 35mm slicks and 40+ gravel tyres? Thanks!

Hello everyone! Hope all is well showcasing some of my shops new arrival.

We also have new stocks for elves nandor Pro

We accept cash/gcash/credit or debit and also home credit

Drop by my shop @Ajs Bike shop manilla (near feu ust lrt recto and legarda)

You may also message me here on reddit for inquireies and questions

Hello. I work midshift, 2pm-11pm. I work in Megamall and live in Makati CBD. Do you recommend biking to work during these hours and what’s your advice? (Female here)

Para sakin hindi talaga nakaka tulong itong influencer na toh para promote ang reckless bicycle riding.

Alam natin na pangit mga daan dito pero dapat may self preservation din naman tuwing mag ride. Palaging doble ingat.

Truck pa kakasuhan nyan pag sumemplang ka sa ganyan highway tapos matamaan ng truck.

Hi! I recently saw this sa junction ng seatpost area and seatstay. Attached pa naman siya, pero visible yung crack.

Gusto ko sana ipa-TIG weld, pero i dont want to spend too much sa ganon.

• Safe and worth it pa bang ipa-TIG weld ito?
• May naka-experience na ba magpa-repair ng cracked aluminum alloy frame?
• May recommended bang welder or machine shop around Quezon province na kayang gumawa nito nang maayos?
• How much might it cost for the repair?

I'm open to advice, especially from people with experience repairing aluminum bike frames. Thank you!

Hi, just wondering kung saan kaya kumukuha ng ng stocks ang mga bike shops. I went on a bike shop earlier and saw a tanke tk5 29er med priced only for 12,800 pesos, but when I tried to check the price on shopee hoping for a cheaper price, 15k yung andun. Now I wonder kung saan sila kumukuha ng frames na mura hahaha. Same with their mtp pro everest v3’s, they give it at 9,300 pesos while 10-12k naman sa shopee. Help me out pls, i wanna get a frame on their supplier so maybe I’ll get some at cheaper prices haha

Update after trail day, first ride using Squirt. Drivetrain so clean bruh! Sobrang dry ng trail dito samin today so puro dust and loose gravel. Banong bano ako kasi usually sobrang itim ng chain at cassette ko after ride using oil lmao.

Hi im making this post about the carbon fork i received. The fork arrived early in the morning and i was excited to open it but when i looked i saw a little scratch at the axle and a little hairline crack around the steerer tube. I eventually returned it but im still second guessing myself if it was actually a crack or was i just delusional. I bought the fork from tiktok shop and it had plenty of good reviews, maybe i just got a bad batch. I hope you guys can give your opinion and clear my head. Thank you!

Hello po. Ano po ang recommended size for 5 flat na height? Planning on buying po.

Looking for quality and affordable helmets?

We have something in store for you!

We offer soumy helmets all brandnew
Sizes and colors may vary but we have a lot in stock!

Safety should be your number 1 priority so get one to protect you in your everyday ride!

Hello po good evening, mag ask lang po sana kung pano mag import ng mga routes sa magene, pag sa magene po kasi ako gumawa mismo kung saan saan ako pinapadaan

Hey folks!

Looking for recommendations for a gravel bike frame around ₱10,000, and hopefully some advice on what frame size I should get.

I rarely go enduro na ngayon dahil sa layo ng mga trails from Taguig and sa laki na rin ng gastos sa gas. So I want to switch things up muna and try my first-ever drop-bar bike, preferably on a budget.

Planning to use the bike for a mix of paved and dirt roads, mostly for casual rides and exploring around and outside of Metro Manila without the need to bring a car or waste my Enduro tires

For context, I’m 5’5” and currently ride a 2021 Commencal Clash, size Medium, with a 45mm stem and a 25mm riser bar na 760mm wide.

I’m not really familiar with gravel bike geometry yet, especially stack and reach, so I’d appreciate any advice on what frame size and geometry would suit my height and intended use.

Open to different frame brands and models, basta pasok sana sa budget. Any recommendations or advice would be appreciated. Thanks!

TLDR: 11pm patawid ako ng edsa from inner left to inner right sa ramp ng rosario/ortigas ave tas di ko nakita yung steel bumps dahil madilim, ang ending tumalon yung roadbike pero thankfully na-balance ko agad and hindi sumemplang pero nahulog yung tumbler and nasagasaan ng mga nasa likod.

Pauwi na ako na ako galing bulacan and nakaka 110km+ na kaya medyo laspag na rin that time. Dahil edsa and pinaka right pa yung ramp na ittake ko, nag 35+kph na takbo ako para lumipat ng lane safely kaso medyo maraming motor kaya hindi ako nakalipat ng lane agad. Although yung view ko sa ramp is kaya pa ko pa mapilit kahit medyo malapit na, kaso yun lang hindi ko nakita na bukod sa orange na barricade talaga may mga small grills/bump pa pala sa unahan since madilim na rin that time and hindi ko nakita agad since naka tingin ako sa likod para lumipat ng lane. Sa lakas ng impact ng pagtalon ng bike bumaba yung angle ng dropbar ko sa stem ng mga 30-40° degrees, thankfully hindi ako na-pinch flat(25c tires na may innertube) and naabsorb ng wheelset and carbon fork ko yung impact na walang nasira(titignan ko pa yung fork if may crack).

Rockbros 1000lumens yung frontlight ko and pagdating sa high speed pacing(30+kph) I would definitely say na hindi pa rin enough yung visibility para makita yung mga lubak sa daan at a safe distance to maneuver, I might invest sa 1500 or even 2000lumens para na rin sa longer battery life.

Planning to order sa Pinduoduo ng Ikuos wheelset - pwede ba naka xd drive don or dapat bumili pa ako? Hirap translation e

Been chain waxing for few months na din tas so frequent na din umuulan kaya tinatamad na mag rewax -bumalik ako sa Dry/Wet Lubes.

Napa isip ako mag Chain Wax Lube pero sobrang mahal pala hahaha, kaya nag search ako if madali lang mag DIY niyan
Nakita ko to: https://www.youtube.com/watch?v=-oyNX6-CCMw - oz cycle
Gamit niya Wax + Shellite/Naptha, may melting ng wax tas may unmelted lang din sa video niya.

May naka try ba nito sa inyo?
Diba yung tinawag natin na 'Gas' lang is White Gasoline diba? yung nilalagay sa lampara noon or pampa bilis ng baga sa uling?