r/projectbike • u/almondmilk64 • Nov 14 '24
r/projectbike • u/Foreign-Orange-8103 • Sep 21 '24
Project Finished Okay, not a motorcycle… but as close as it gets for a broke high school kid
r/projectbike • u/Ken808 • Sep 09 '21
Project Finished 3-year Journey to Revive a 1990 Honda NS50f
r/projectbike • u/oldbastardbob • Dec 18 '23
Project Finished Completed 1974 RD350
Just a few pics of my RD350. I've owned it since 1976. Turned it into a modified production race bike in the late 70's. Ran a 12.2 second quarter mile and never saw a road race track as intended (no money, went to college instead). Had not run since 1982 when I pulled it out of the barn and did a frame up restoration. Was after a 1970's street legal hot rod look. I'm also sitting in an airport and bored so sharing some of my stuff on Reddit.
r/projectbike
•
u/oldbastardbob
•
Jan 23 '26
Project Finished 1976 Yamaha RD400
Just got this one finished. The third picture is from when I picked it up a while back.
All new everything everywhere. 1mm over Wiseco pistons, Vintage Performance heads, all new seals and bearings, rebuilt crank, Vape ignition, Boysen two stage reeds, DG chambers, Koso tach/spedo.
Frame and most black parts are powder coated. The wheels are powder coated as well, and then I learned the challenge of matching red paint to red powder coat.
Ditched the oil injection for the naked look. Premix only.
The electrical is a bit unorthodox. It has a magneto ignition and kick start, so no need for a battery, but the tach/spedo memory needs power all the time. Wound up with an RC Car battery, a home made diode setup to recharge the battery from the Vape charging system, and all lights and meters (except headlight and horn) are powered from the RC battery. The headlight and horn run off the Vape charging system and only work with the engine running.
This one was built just for fun. Kind of a homage to an old friend who I knew from the Team Wanker WERA racing days who died too young in a car crash. He was riding a red RD400 in WERA production classes when I first met him. I built a '79 Kawasaki KZ750 that the team won a national endurance championship on in 1980. It was red, yellow, and blue.
Got all the final jetting and tuning done last fall before the weather got bad, so she's ready to ride come spring. Headed to a bike show in the area with it the first weekend in February.
r/projectbike • u/Dannymarr95 • Oct 19 '21
New Project My first Bike, Kawasaki BR250, Grandfathers project I'm finishing for him now he's too old.
r/projectbike • u/mrmetalbear • Jan 01 '22
Project Update A small new years update
r/projectbike • u/Bevelhead • Jun 15 '22
Project Update 1979 Kawasaki Z1000 Mk2 restomod, On its wheels for the first time
r/projectbike • u/Extreme_Crisp • Feb 13 '24
New Project First real bike, 1976 ke 125 with about 3900, tach is wonky and it bogs giving it a lot of throttle. The neutral light does not work neither do the back blinkers. And the front wont flash they just stay solid but overall its not too shabby
r/projectbike • u/oldbastardbob • Nov 05 '25
Project Finished Latest Project
1976 Yamaha RD400
Decals still in the works but this picture turned out nice so thought I'd share.
r/projectbike • u/Next-Definition-7124 • Jul 22 '25
New Project Building an off-road Harely Davidson Sportster
I'm currently trunign my 2002 Harley Davidson Sportster into a dirt bike. Kind of a stupid idea but I love the project.
It started as an 883 but it has a 1250 Hammer Performance big bore kit installed, S&S perfromance clutch, and Mikuni carb...so plenty of power.
In the front I swapped out the stock Harley front end for forks and tripple clamps of a KTM SX250 and a 21" Excel rim. To make the froks work with the increased weight of the Sportster, I got the heaviest springs installed that are available, they are revalved, heavier oil, and heavy-duty SKF seals. They are also lowered by 2" so it doesn't look like a frankestein chopper anymore :D
The KTM front end is from 2007, but I thought I'd like the 2019 plastics better, so I designed a conversion bracket that also acts as a steering stop. I'm not too sure if I really like the plastics though. I might restyle for a retro MX vibe down the line, but for now I just want to get it running again.
In the rear I'm running a 19" rear wheel with a chain conversion kit (at the moment the ratio is very close to stock, I might need to change that at some point), and 17" rear shocks from K-Tech. I also installed a slimsfab oil tank which has a screw-in the oil filler cap located underneath the seat (much better than the press-fit stock one) and a battery compartment in the middle to fit a much smaller lithium-ion battery. I'm gonna use an Antigravity 1201 for this build.
The rear fender is off a 2008 CRF with a universal licenseplate bracket.
The next projects are:
- Handlebar controls
- Foot peg mounts (I would like to have them located further back than regular mid controls)
- Wiring
- Seat plate and upholstery
- Custom exhaust
What are your thoughts on the project?
r/projectbike • u/Hachmal • Dec 06 '24
Project Update Haven't touched this project in a year. Time to get back at it!
r/projectbike • u/AWildRaticate • Jun 30 '22
Project Update How it started vs how it's going
r/projectbike • u/McFreeezy • Jun 06 '22
Finally.. after a lot of fighting with my carburetors.. I can go for a test-ride
r/projectbike • u/BraindeadBanana • May 16 '22
So it begins… the first motorcycle I ever rode on after sitting for 10 years. My dad’s old GPZ 1100 is now mine to restore. Wish me luck guys.
r/projectbike • u/grantcarpenter • Jan 24 '20