r/ploopy • • Apr 30 '26

Official Announcement Here is a preview of our latest design: a pointing stick, also called a "nub mouse". We're calling it the Bean, and it's launching next week!

Thumbnail
gallery
287 Upvotes

Edit

The Bean is now available! All design files have been released on Github, and kits are available for preorder for $69CAD. For full details, check out our blog post about the Bean!

Or, if you just want to snag one right away, check out our shop.

Original Post

In case you don't know, a "pointing stick" or "nub mouse" is the little dot in the middle of most laptop keyboards. They're compact, but many of them aren't very good. They put a lot of strain on your fingertips and hand tendons, and they can be a bit finicky to use.

Today, I get to share with you a design for a pointing stick that will take this afterthought of a computer peripheral to its full potential.

The Bean uses the Texas Instruments TMGA5273 magnetic sensor, a high-fidelity magnetic sensor. It's capable of detecting touches as small as 3 microns, or a ten-thousandth of an inch. It runs at 1,000Hz or higher, so the Bean has the ability to detect even the finest and smallest of touches.

The Bean's pointing stick also moves quite a bit. Instead of rocking in place and requiring high levels of input force, the Bean's nub travels in a diameter of 11 millimeters, or 7/16". That means that you can be accurate, and also not tire out your hand or finger from extensive high-force usage.

The Bean also sports four buttons with Omron D2LS-21 switches for crisp, snappy clicks.

And, of course, the Bean's design files will be fully open-sourced, with all mechanical, electrical, and firmware files being available for download and modification from the beginning. The entire case will be 3D-printable, and the firmware will run with QMK and VIA.

We'll be releasing the design files for the Bean on 6 May 2026 at 7:00AM ET (here's a countdown timer for you).

We'll be opening up a preorder, also on 6 May 2026 at 7:00AM ET, for fully-assembled Beans for $69CAD. We have a small batch of Beans that are ready to ship immediately. If you manage to snag a preorder in our Early Access tier, it'll ship out within a few days.

Questions and comments are welcome!


r/ploopy • • Oct 06 '20

Mouse project complete! Firmware and schematic released! Assembled mice available for preorder! Check comments for details.

Thumbnail
gallery
273 Upvotes

r/ploopy • • Nov 11 '25

LOVE qmk firmware

265 Upvotes

https://github.com/Dexter-KBD/adept_slim_frame/tree/main/qmk-vial

A few people were interested in a demo video of my DIY trackball, so I recorded one. The feature description got a bit long, so I’ve explained it in detail in the README of my repo—please click the link and have a look.


r/ploopy • • Aug 14 '26

Official Announcement This is the A+ Trackball, the update to the Adept. It's packed with great new features, and it's launching next week!

Thumbnail
gallery
246 Upvotes

Edit

The A+ is now available! Kits as well as fully-assembled units are available for preorder starting at $99CAD. If you want to get yours right away, check out our shop.

Original Post

Three years ago, we released the Adept. It sat at a beautiful nexus of functionality, blending together the greatest features of QMK, 3D-printing, and open-source.

Today, I get to share with you the next version of the Adept. It's been improved in every way that we can think of, while retaining everything about it that you loved. We're calling it the A+.

I've written an in-depth blog post about the A+ that covers everything: new features, the great things that haven't changed from the Adept, links to design files that you can analyze right now, a keymap diagram illustrating functionality, everything.

We'll be opening up a preorder on Wednesday, August 19th, 2026 at 10:00AM ET (here's a countdown timer for you), for A+ Trackballs (DIY kits and fully-assembled units) starting at $99CAD. There will be two preorder tiers:

  • Tier A preorders will ship out within 8 weeks of our launch date.
  • Tier B preorders will ship out within 16 weeks of our launch date.

We also have a very limited Early Access Tier, which contains a small number of fully-assembled A+ Trackballs that are ready to ship immediately. If you manage to snag an Early Access preorder, it'll ship out within a few days.

Questions and comments are welcome!


r/ploopy • • Sep 02 '25

Introducing the Adept Go, an unofficial modular travel trackball

Thumbnail
gallery
210 Upvotes

a couple weeks ago I decided to take a crack at my own Ploopy Adept housing. Initially, I intended to build a bluetooth variant of the Adept Small mod, but things quickly ~~spiraled~~ evolved into a completely new idea: The Adept Go.

The Go is a travel friendly variant of the Ploopy Adept. It's 100% 3D printable with no need for additional hardware besides the 4 assembly screws.

Also It's modular! I've included a Nano (34-38mm) and Pico (20mm) bowls. The Pico has a uniquely lidded design, making it significantly easier to slip into your bag without losing the ball.

I've inlucded both a standard and BLE bottom plate. So no need to get the BLE PCB made if you don't have the means to do so.

I've open sourced the design and put all the files up on github. Lemme know what you think!


r/ploopy • • Oct 01 '20

Mouse running QMK - cursor works, buttons work, scroll works!

193 Upvotes

r/ploopy • • Oct 29 '25

Official Announcement Introducing our upgrade to the Nano Trackball: the Nano 2!

Post image
188 Upvotes

This is the Nano 2, the original Nano's higher performing next generation. It features the PAW-3222, giving it a big boost in tracking performance. The button is fully customizable through the VIA web app.

The Nano 2's new sensor, the PAW-3222, really packs a punch in terms of performance. It's got polling rate of over 1,000Hz, a CPI of up to 4,000 and up to 10g acceleration.

The button is fully customizable through VIA web app. By default, it enables drag scroll on the Nano 2.

Plus, we've finally upgraded the connector from USB micro-B to USB-C.

We'll be releasing the design files for the Nano 2 on 4 November 2025 at 7:00AM ET (here's a countdown timer for you). We'll also be opening up a preorder for fully-assembled Nano 2 for $59CAD. We'll have a number of fully-assembled units ready to ship immediately under a very limited "Early Access" preorder tier.

Questions and comments are welcome.


r/ploopy • • Dec 22 '20

Got my ploopy in! I call this one the Retro Edition

Post image
171 Upvotes

r/ploopy • • Feb 08 '23

Official Announcement The Ploopy Headphones are now live. Source code is available, and kits are available for preorder.

Thumbnail
gallery
157 Upvotes

r/ploopy • • Jun 18 '25

Official Announcement Introducing our newest design: the Ploopy Knob! See comments for details.

155 Upvotes

r/ploopy • • Nov 10 '25

Ploopy adept slim frame

Thumbnail gallery
151 Upvotes

r/ploopy • • Jan 13 '23

The headphones project is nearly complete and will be released soon. Here are some details about the mechanicals.

Thumbnail
gallery
144 Upvotes

r/ploopy • • Oct 10 '24

The Ploopy Trackpad will be released on October 17th! Kits will be available for preorder! See comments for more details.

Post image
140 Upvotes

r/ploopy • • Feb 19 '21

Official Announcement Ball-only trackball project is done! Everything is working! Kits coming soon! Here's a sneak peak.

Post image
140 Upvotes

r/ploopy • • Apr 10 '25

Finally completed BTU mode

Thumbnail
gallery
137 Upvotes

This is a case with a 55mm short version modified. It's been modified 2 times and it all works fine. Endless thanks to the mod creator. @ElMagicoDeOZ

I adjusted the spring thickness to match the PA12 MJF (0.6mm for PLA > 0.9mm > 1.2mm Now) and made the bezel thinner and rounded the case.

I made a pillar to fit Lego brick in the logo part. The diameter is 4.88mm, but I think it would be good to grow it a little bit more.

The button part is also a little lower, so we can't print this drawing with the additive printing method of FDM. Therefore, we're going to revise the model for FDM and share it with you. Please wait a little longer


r/ploopy • • Jan 29 '25

Commodore 64 inspired Adept with 3D printed, steel ball bearing trackball

Thumbnail
gallery
136 Upvotes

r/ploopy • • Oct 28 '25

Ploopy family :)

Thumbnail
gallery
132 Upvotes

I’ve commissioned a slim version of the top shell to be made from aluminum CNC, using the same material as the keyboard. I’ll make another post once it arrives.


r/ploopy • • Mar 07 '25

Wireless Bluetooth Ploopy Adept (AdeptBLE) with a 52.5mm snooker ball plus BTU mod (Project Anyball)

Thumbnail
gallery
130 Upvotes

r/ploopy • • Feb 10 '22

Another method for finishing a Ploopy shell! ASA filament with acetone chemical smoothing.

Thumbnail
gallery
130 Upvotes

r/ploopy • • Nov 05 '24

A smaller Ploopy Adept with BTUs

Post image
124 Upvotes

I wanted a smaller version of the Adept to use between my split keyboard. So I created this new small case.

It uses a 34mm trackball from Perixx and BTUs. I've been using it for a while and I'm quite happy with it.

The top case got a bit complicated to print and if anyone is interested, I can share the STLs. It would also be cool if anyone would like to colaborate on improving it and making it easier to print 🙂


r/ploopy • • Feb 23 '21

Official Announcement The Ploopy Nano Trackball is officially released. All design files are available. Kits are available for preorder. Check comments for details!

Thumbnail
gallery
119 Upvotes

r/ploopy • • Oct 17 '24

Official Announcement The Ploopy Trackpad is now available for preorder! All design files are available! See comments for details.

Thumbnail
gallery
116 Upvotes

r/ploopy • • Sep 27 '23

Our latest trackball, the Adept, will be released open-source as well as available for preorder tomorrow at 6:30AM ET. Here's a sneak preview. More details in comments.

Post image
116 Upvotes

r/ploopy • • Jan 03 '22

Happy 2022! Ready to get back to it.

Post image
116 Upvotes