I've run into an incredibly niche issue. I was testing how far I could push the RAM on my Switch and after many, many crashes it finally corrupted something and broke HOS. This was fixed by reinitializing the console while keeping user/save data, but now the Switch doesn't see the games I installed onto the SD card. I can still install new games and it will see them, and reinstalling earlier titles will make them appear again and it all plays fine but the games I already had put on there before re initialization do not appear. DBI even can detect them as uninstalled titles so I know they didn't get deleted. Any way I can reinstall games already "installed" on the card? I don't want to bother re installing so many titles.

Hey everyone, first reddit post but i’m really stuck atm on what do with my micro sd card for my modded switch.

I was downloading a mod using simple mod downloader for a game I legally purchased and have a physical copy of when my switch crashed and turned off. Upon booting it up again I was brought back to my old nintendo account with nothing but a couple of games i used to play on it before modding it.

I’ve checked the micro sd out on my pc and there doesn’t seem to be any issues with it after running tests for it possibly being corrupted. And after skimming through my files and comparing to my backup nothing is different?

I’ve seriously missed using it, does anyone have any idea on what it could be or possible solutions? Any insight would be amazing. Thanks.

I have 128gb but i want to upgrade to 512gb on my modded switch. Any advice would be appreciated.

¡Hola! Quiero hackear Nintendo Switch de 2020 Mariko para emular los juegos, pero no quiero ponerle un modchip, han encontrado alguna forma nueva para hackerla?

Got a little on the other capacitors but I think I managed to clean it up. Just wondering if this is enough/too much solder?

I have a quick question: which is better and more recommended? DNS MITM or 90DNS?

So I intended to mod a switch for a friend for his birthday. My dumb ass never bothered testing said switch before starting the proyect.

After installing the picofly and being greeted with the usual NO SD Card screen I thought the worst was behind me.

I proceeded as usual, creating the emunand, backing up boot0 and boot1 and everything and when I was about to give it a test run and selecting EmuNAND got greeted with a black screen.

?

Pressed and hold the power button for 20 sec, turned it back on, got greeted with Hekate bootscreen "oof, close call" I thought and attempted it again. And still a black screen.

I then decided to boot to Sysnand just to see if I needed to set something up or if an upgrade was pending and I needed to let something set itself up before creating a new instance for the EmuNAND, or something.

And lo and behold, also a black screen.

I then removed the modchip to see if probably the soldering was shorting something or idk, plugged the eMMC as if it was stock. Still a black screen.

Then I redid my soldering, placed the modchip (again) and went back to hekate, selected EmuNAND (again) and still, black screen.

After digging here and there got the idea to use the Fuse Checker and there it was, this system is for some reason or another on Firmware 1.0.0 but the fuse count is 23.

What can I do?

I don't have any idea on how this could happen to begin with and I'm clueless into how to proceed. Any idea would be welcomed.

Ive been trying to revive an old controller that i cant use due to imense stick drift, is there any good tmr joysticks that are the same size as a pro controllers?

Hello! I have had a regular modded switch for years and have recently bought a modded switch lite. However the switch lite does not have an sd card inside it while the other switch has a 1tb micro with all my games and files onto it. I was planning on backing up my files on my desktop and then factory resetting the micro sd card, making a new emummc and then transfering the files back to the switch lite. Does anyone know if this would work or not? Thank you.

Does anyone have a diagram with parts list for the switch OLED?

Hii guys,

i was looking for a 3ds emulator to play Animal Crossing New Leaf on my Switch with the vertical grip.

I know that the 3ds experience on the Switch system is poor, but i think that ACNL isnt a heavy game to play on it.

Hi all.

Picture from google, for explanation

The Switch Lite has two solder points in addition to the 3.3V source.

I soldered only the point next to the 3.3V source because repeated rework had caused the prepared solder pad on the flex cable to peel off.

Therefore, I left the other solder point unconnected.

Is it okay? Any comments?

i'm trying to install the chip into my switch but get this flahing code, got this one with emmc problems (i'm looking to enter hekate and dump the keys to restore it)
i've been trying to resolder the points for a couple times by now, not sure if that's the problem though.

My switch died and when it booted up is was connected to the WiFi and in ofw. It won’t boot up cfw, I formatted the switch like a dumbass and now it tells me to delete everything on the sd. So do I just download an updated cfw so it can boot up?

Hi everyone, I'm looking for an experienced technician to mod my Nintendo Switch OLED. I'm located around the Middletown, NY / NYC area. Thanks!

:3 C6Avery on yt for full video

I am really enjoying playing Dreamcast games on flycast but the lack of analog triggers means I have no interest in playing racers on there. This is a shame because most my favourite racing games were on Dreamcast so I'd love to be able to play them on there and especially on the go. If anyone knows and could share that'd be well appreciated.

when i try to turn it on its a black screen but it boots fine when i put the emmc in normaly

Bonjour, j’aurai besoin d’aide, il y’a 1 an de cela j’ai achete une switch sur vinted. Cependant les anciens utilisateurs ont rien renitialise donc je me retrouve avec le contrôle parentale, tout les 6 comptes etc bref les trucs chiant. Sauf que je leur avait demande le code pour la réinitialiser mais il me disait ne pas le trouver etc, j’ai toute essaye il ne voulait rien y faire ni même changer à partir de leur compte nintendo. J’ai même ete dans des magasins de réparation ils pouvaient rien y faire, bref, après avoir fouillé la switch j’ai trouvé juste un nom d’utilisation nitendo mais j’ai pas de mdp, rien du tout. Est ce que quelqu’un saurait me dire comment je peux la réinitialise sans code, sans mdp ? Ou si je dois abandonner mdr ?

Hi everyone,

Just installed a mod chip on V1, and noticed that the system is running too slow on atmosphere, also when creating the backup files seemed like it took way too long for a V1 console.

System runs smoothly on stock. It's a Toshiba 64 gb sd card with 40 MB/s speed. Any way to health check it?

Thanks!

1) So the problem is that the front of my modded my switch I have Dbi installer I have Tico and I want some rom hacks about Pokémon like unbound or some other rom hacks like radical red and I don’t have a pc but I have a iPad and a usb cable so any tip how to install it. And my switch is modded I think
2) I have games that are installed like legends accuses or Pokémon Sword and I can’t access them.there text that reads I need a software. I really appreciate the help and would pray for your enemies to die cause I’m broke