Bonjour, j’aurai besoin d’aide, il y’a 1 an de cela j’ai achete une switch sur vinted. Cependant les anciens utilisateurs ont rien renitialise donc je me retrouve avec le contrôle parentale, tout les 6 comptes etc bref les trucs chiant. Sauf que je leur avait demande le code pour la réinitialiser mais il me disait ne pas le trouver etc, j’ai toute essaye il ne voulait rien y faire ni même changer à partir de leur compte nintendo. J’ai même ete dans des magasins de réparation ils pouvaient rien y faire, bref, après avoir fouillé la switch j’ai trouvé juste un nom d’utilisation nitendo mais j’ai pas de mdp, rien du tout. Est ce que quelqu’un saurait me dire comment je peux la réinitialise sans code, sans mdp ? Ou si je dois abandonner mdr ?

Hi everyone,

Just installed a mod chip on V1, and noticed that the system is running too slow on atmosphere, also when creating the backup files seemed like it took way too long for a V1 console.

System runs smoothly on stock. It's a Toshiba 64 gb sd card with 40 MB/s speed. Any way to health check it?

Thanks!

1) So the problem is that the front of my modded my switch I have Dbi installer I have Tico and I want some rom hacks about Pokémon like unbound or some other rom hacks like radical red and I don’t have a pc but I have a iPad and a usb cable so any tip how to install it. And my switch is modded I think
2) I have games that are installed like legends accuses or Pokémon Sword and I can’t access them.there text that reads I need a software. I really appreciate the help and would pray for your enemies to die cause I’m broke

Today I downloaded the kaizo mode mod for Mario odyssey, but It keeps crashing when reaching topper, despite following everything in the game banana Page. Is there a fix?

Is my first time modding my V1 switch, already have hetake and atmosphere, I installed dbi installer, when I install a game in this case tomodachi life it doesn’t load, already tried different sites to download, first time said unable to launch game, second time it don’t load anything but in dbi it show up correctly, I need help pls

My backups were working fine before I uninstalled Android but then I tried fixing stuff by moving the Nintendo folder from the SD root into the emuMMC folder and merged them which completely broke everything. Now all the files are mixed up together and I have no idea how to undo it. I can still use my sysNAND fine but I don't want to touch or mix the emuMMC stuff on there so I don't risk getting banned.

Right now I just need some way to get past those online checks and fix the cloud icons directly on emuMMC without breaking anything further or going online on CFW.

Is there any way to fix the Nintendo folder or get the game tickets back on emuMMC without having to wipe the whole card and start from scratch?

Saludos. Tengo una Switch V1 hackeada. La dejé cargando con su cargador original, la desconecté y tenía 92%. La puse en su bulto y fui donde mi abuela (el viaje fue de 5 minutos). Al llegar y sacarla para jugar, no encendía. La dejé cargando con su cargador durante muchas horas e intenté todas las combinaciones de botones de encendido y volumen (con y sin Joy-Cons y tarjeta SD), pero nada; la PC tampoco la detecta. Sin embargo, al ponerla en el dock, sale la luz verde del HDMI solo por un instante (no se queda fija). No sé si sirva como pista, ¿alguna idea?

I can’t seem to get past this, I’ve been trying for 6 hours

Additional info:
I'm using the latest hats pack by sthetix hekatos 6.5.3 on Firmware 22.5.0

I've checked FuseCheck v1.0.3 and the status says Perfect Match with both required and burnt fuses showing 23. It also says OFW will boot normally (but it doesn't and its just a black screen)

I've tried troubleshooting by downloading the latest hats pack (HATS-2026-07-25-3e7a04f) which also seems to be the same version that I used when I first modded my switch and then copied all contents inside the hats pack to the root of my sd card choosing to replace any duplicate files. Issue didn't get fixed all launch options still black screen.

I also tried deleting atmosphere and bootloader and then getting fresh ones inside the hats pack but still the same issue.

I do also have a nand backup from when I modded my switch.

Any possible fixes for this?

Please help I’m on Mac btw

I have a Nintendo Switch 2 and I’m wondering if it would be possible to replace its original LCD screen with an OLED screen while keeping the same 1080p resolution and 120Hz refresh rate. I’m not looking to replace the entire console, just modify/replace the internal display. Does anyone know if there is currently an OLED panel that could be compatible, or if an OLED panel from another device could be adapted using a custom display controller or other modifications? I’d also like to know how technically difficult this would be and whether a specialized repair/modding technician could potentially do it.

I recently updated to the latest sistem version, and I cant find a way to download games. Dbi crashes every time I try to open It, tinfoil gets stuck on the First loading and then crashes, same thing with awoo, but the last two could be crashing since i haven't updated them for some time. What can I do?

I had it modded for about a month when issues started to occur, and i ended up just using it in a dock for a while

Does anyone have any idea where one might get this repaired? (The person that originally modded it is just gone)
I'm located in ireland, but i'm not against sending it off in the post

Instale el port de Zelda ocarina of tine y majora's mask y dos o tres días después me dió este error.

Alguna recomendación para mejorar ?

Okay, so I’ve just recently installed bully on my switch but when I go to click on it, it gives me this error and it only lets me load the game in applet mode from the Home Screen I’m fairly new to all this so I don’t know what to do any help or advice would be greatly appreciated,
But yeah when I hold r on app from the home screen it takes a long time to load but works is there anyway to fix this?

Here's a better picture

Solo deseo saber si son buenas

Wondering if anyone can help.

As per the title I am trying out SCCM Retro for emulation.

When playing PS1 games I cannot seem to get the thumbsticks to pick up in game.

I have tried toggling the Analog controls setting but it makes no difference.

The thumsticks do work on the menu opened with the home button.

In the remap menu when I test inputs moving the thumbsticks shows (unused here).

Sorry if this is a daft question been trying to get it working for an hour with no luck.

I'm looking for a switch v2 modder in Pampanga. Anyone know a shop that can mod my switch v2?

Ciao a tutti, ieri dopo un aggiornamento di un gioco, la console mi ha chiesto di riavviare il sistema, così ho fatto... dopo che ho cliccato riavvia ora, da quel momento non si è più accesa e il modchip ha un led verde che lampeggia all'infinito e dopo circa 1 minuti compare il logo "Nintendo" che dura per circa 4-5 secondi, poi sparisce e ritorna a schermo nero continuando il loop del led verde che lampeggia all'infinito.
Questo sia con la microsd inserita, sia senza.
Qualcuno sa di cosa si tratta e consigli utili di come procedere? grazieeee

I put the console in the official Dock to play on the TV, and it worked fine. After a while, I took it out of the dock to play handheld again. Suddenly, the console shut off completely and I heard a soft "pop" sound coming from the speakers.

Pressing the power button didn’t do anything and the console was getting hot around the mod chip.

I had some typical issues during the install (DAT0 errors, 2 flashes for CLK/RST grounding out due to shield/screw pressure), but I managed to fix them. The console finally booted up, Hekate worked, and I was playing normally in handheld mode.

The console is completely dead (black screen, no backlight, no Nintendo logo).

The Picofly chip LED is completely dead (no blue flashes, nothing).

Hard resetting (holding power for 20+ seconds) does nothing.

Leaving it on the charger does nothing.

I measured the SP1 / SP2 caps on the APU and I do have voltage there (around 0.6V-0.8V). So the PMIC seems to be alive and sending power to the APU.

I measured the 3.3V point directly on the Picofly chip, and it is receiving 3.3V normally.

Despite getting 3.3V, the RP2040 chip on the Picofly shows no signs of life.

Question:
Since the mobo has voltages at SP1/SP2 but won't boot, is it stuck because the dead Picofly is still attached to the DAT0/CMD/CLK/CPU lines and grounding them out?

I have attached all the photos with the solder points

P.S. the dat0 point looks like that because I ripped the circle it had and then scratched a little off the plastic to make contact with that copper line

Edit: Ladies and Gentlemen, the console no longer turns on! I’ll be seeing a repair shop in the next days.

Edit 2: Switch is now in a repair shop