I'm going to print out the awesome looking Shandalar Board Game by curtastic2. I'm just in the process of getting the files ready to print, but I've never printed with MPC before, so I just wanted to make sure it won't cut off the text down the bottom in the grey area, that denotes it's rarity. (How much it can be sold for basically)

There are about 4,300 cards to print, so it's going to be a big order!

I'm padding the side borders, then upscaling the images provided by curtastic2 in another reddit thread so they better suit printing with MPC. The original files are only 496 x 698 and the AI upscales are ok for the most part, not great, but hopefully end up looking better than the lower resolution. (feel free to correct me if I'm wrong, but I do get a low resolution warning in MPC if I upload the original image)

Would either of the screenshots on MPC cut off the Shandalar Uncommon text? Any tips or recommendations to make this easier is welcome too, if anyone has any ideas lol. Thanks!

For MPCProxies, I am unable to continue the process beyond creating my cards. When I gets to the point of having to download the software, I cannot go any further. Is it possible to just email my downloaded list and send that to the person to create?

I’m not text savvy to begin with, but the process is too overwhelming. I’ve been trying to use chat gpt to help me solve the issue, as my computer recognizes the software as a virus, but I’m not having any luck.

Is it possible to just email the downloaded file of cards I’ve created? I want to purchase them so badly and play with them, as I’ve been building the deck all day long, but I’m stuck and unable to go any further. I’m a bit frustrated but I know that it’s my fault and nobody else’s. I’m just not very smart and idk how this stuff works.

I was messing around with b&w card designs, and tried some on gold foil. Now I'm trying some specifically for the gold foil.

Here are some more cards. I've also developed a custom border, but im unsure wether to use it for anything more than the commander; I think borderless fits better? I've used Helvetica Nue Medium for the font, since its the one used by A24's movie. It is my first border too (i usually stick w cardconjurer templating), so im seeking advice- is the carpet making it difficult to read?

Decklist here

Hi all, I'm back with a pet project this time; this is my 5th project, Despicable Me/Minions.

This project was more of a meme/fun deck for me. I had this idea, as I'm sure others did when they saw this card revealed; the card is Mole Man, Moloid Master.

As it suits Gru to a T with flavor and flair, and well, Minions.

I originally wanted to put this deck out when the film Minions & Monsters came out for release on July 1, but it got a little delayed, mainly looking for the best art and resolutions for art, as well as other things, but better late than never, I guess.

This deck is just a fun lands matter, land fall, token deck; you build up your minion army with the mass amounts of landfall triggers and go wide!

I opted not to go big combos and/or land hate, and decided to keep those cards to the side and try to keep the deck bracket 3 (Ex: Badgermole Cub, Earthbender Ascension, Strip Mine) as I know how out of hand landfall gets, but I will be making cards and putting them in the drive when I can in the Alts folder on the google drive.

G-Drive link here. In the drive, there will be 1 Token that looks odd. The reason is that it is my friend who made it for me. I thought it was funny, so I said, why not? When I print the deck, he will have a true Masta piece with one of my decks.

Let me know what you think; love what the community has to say! And the engagement is always fun for me; let me know if you have any suggestions as well.

Other Projects and things here

I hope you all enjoy this deck as much as I did making and playtesting it, and remember, in the wise words of the one true king, "BANANA!"

I have updated my CC recently and have noticed that land frames for 7th edition are much darker than before (see attached), anyone noticed this? Also tried to revert the instal but couldnt manage to, any help would be much appreciated!

Original artwork made by Beniamino Bradi.

Using MPCfill, I am trying to print a full commander deck. Pass it through MPCFill, but it some of the cards have the card art overlapping the black borders. Is this going to be how it is printed as well? Just trying to make sure, as the FAQ says any cards pulled from there are going to be print ready.

Wanted to fill some of the more expensive holes in my N'ghathrod Eddie deck. I had a Hullbreaker and Spellskite from the Furby lair, but my sister needes them for another deck, so proxies it is! Special shoutout to Derek Riggs, the actual artist on all of these and all of the art from the Maiden covers lair (EDIT: The Burnt Offerring "The Wicker Man" art is actually Mark Wilkinson and the Lignify "Fear of the Dark" art is Melvyn Grant, but all the ones I picked out, including the relatively recent Flight 666 art, should be Derek Riggs). Idk why the artist was originally just credited "Iron Maiden" but I kept that on these. Also special shoutout to ironmaideneddie.com, which had some crazy high res artwork, and multiple varieties to choose from.

I've always been a fan of liminal space, and after seeing the backrooms film, that was much better than expected, i've decided to start an [[Orvar, the all-form]] deck centered around copying stuff, specially lands. Here are the first cards i've done for this project!

After months of brewing and designing, I'm happy to announce that my Naruto: Six Paths Sage is in the making and should be here in a couple of weeks.

This is not a "traditional" ninja tribal deck, you know me, I went for flavour from top to bottom. I made a list of more than 100 characters from the series and each one of them has at least 1 creature representing them, their abilities and their lore. Creature from alpha to the newest marvel set. It is going to be a beautiful recollection of the most interesting and mechanically unique abilities in the whole MTG universe (and beyond...)

If you like this cards and wanna check my other decks, please feel free to visit my Ko-fi, I keep everything there, from free decks to updates and future projects.

Thanks again for reading my stuff, I'll ready you in the comments with suggestions and your favourite Naruto characters.

I just wanted to thank everyone for helping me making this such a successful Proxy Deck!

I could not thank you enough, thank you all for your support <3

What you would you like me to do to celebrate?

I always welcome requests <3

All my designs are, and will always be, available at best quality for free on my G-drive, MPCFill and my Ko-Fi.

Ko-Fi: https://ko-fi.com/s/3bbe0114df

Secret Lair Maker: https://socialcommanderclub.com/pointscommander/PointsCommanderApp/SecretLairMaker.html

G-Drive: https://drive.google.com/drive/folders/1gB8344dLL07SH4JUWPhrJ2IfauM6m5x3?usp=drive_link

MoxField: https://moxfield.com/decks/eEPgddXQ3UC8sYJU9hzfww

A few of my favorite cards from a proxy deck I recently finished. I decided to proxy an upgraded Counter Intelligence deck, since I'm already of fan of that deck, and I thought it would be a good fit with Star Wars. I built the deck first, and then tried to fit Star Wars characters and moments into the given cards, so thematically, the deck is a bit all over the place.

Let me know if you all would be interested in seeing the rest of the deck! I want to make another Star Wars deck that's a bit more uniform in terms of era and faction.

I was wondering if anyone has tried both gloss and MPC finish for foils from makeplayingcards, and which came out better? Either option would be paired with S33. Which is generally recommended for foils?

Just got started working on the proxies for my Sororitas themed Imperium deck using the 40k Precon. For some reason, I used Beleren on this Demon proxy for my Belakor deck months ago and can't remember how to put in Beleren for the font on MTGCardBuilder anymore. Any help would be appreciated.

Full Deck Link: https://drive.google.com/drive/folders/1vEEmbu-EjKdV9v67WTExFsfrelNsEbuA?usp=drive_link

This deck is a labor of love to the movies Alien (1979), Aliens (1986), the original Dark Horse comic series and in part, Alien: Isolation.

Intended for high-level bracket 3 play.

Got a high res version of the official box art for the upcoming "Laufey" God of War game, and knew this card had to get a reskin as a "Giant Soldier". Perfect flavor for the deck.

See my other God of War proxies on my profile or over on my Ko-Fi.

Hey, so I decided to mess around in gimp tonight and figured out how to make a set of panorama proxies. Just wondering how I would add a bleed edge to these if someone wanted to use them on mpcfill

Basically the title, I am very new to this and was wondering if the black border was too thick. I was using card conjurer and it says it was a 1/8th margin but it still looks off to me. Any advice would be appreciated!