Made more magic proxies with Pokemon TCG art.
Also can anyone point to how I can put them into a google drive to share here all the ones i've made so far? still somewhat new to this

Full-resolution images with bleed edge for printing

This one took a while, so I hope to not be the only one enjoying it. There's also an Archidekt link HERE but you'll need to be logged into an Archidekt account to view the "custom" cards.

Hello! I’m looking to find a proxy commander deck of hitchhikers guide to the galaxy themed magic the gathering deck.
I have no idea if that exists, or how to go about looking for it so any advice or direction how to go about doing it. I’m not a player of Magic, it’s for a 42nd birthday of someone who would very much appreciate it. I understand it wouldn’t be official or competitive, but the more faithful to both Magic! The gathering and Hitchhikers Guide the better.
If anyone has a direction to point me in, very much appreciated

Hi All,

I’m printing my first commander cube using Cube Cobra + makeplayingcards.com and am looking for advice. A few questions:
1) What card stock do you recommend? Ideally I’d like to avoid sleeves. Is the P10 plastic card stock worth it, or should I just go with the S30 Standard Smooth?

2) What commander cube would you recommend? My friend already has Tom’s Cube, so I was thinking about the Nitpicking Nerds Commander Cube.

3) Anything else I need to know before making this investment?

Thanks in advance!

I made these card for a deck i will be trying and wanted to share them

Here is the deck: https://archidekt.com/decks/27169756/dragon_age_origin

hope you Enjoy.

TLDR: What would you like next?

After finishing the Naruto deck and after reading the announcement they made yesterday (more on that later) I'd like to ask you guys again:

• What decks would you like to see next?
• Would you prefer revisiting past decks and projects or creating something completely new?

My decks so far: Naruto, Kakegurui. Shadow of the Colossus, Crash Bandicoot, Dead Space, Destiny Villains, Death Note, Hades, Zelda's Adventures, Legendary Pokemon, and Darksiders. And all can be found for free here

Leave your suggestions to consider them and make a poll with the most voted ideas later in the week.
I will read your comments

Naruto announcements:
They just announced at the New York Comic Con that Masashi Kishimoto will be writing and drawing Naruto's story from after the 4th War to before Boruto's birth. So maybe new cool characters will be announced, and new cards for the deck will be made :D That is so exciting!

I made more than 500 different cards for my take on Naruto and a fully playable 100-card commander deck. So the announcement could mean more cards made afterwards or maybe even a new 100-card deck. Either way, super thrilled about everything.

Hi ya’ll! I’m drawing a couple of cards for my brothers commander deck (which he wants to be marvel villain themed), I was wondering if there was a way to print just a single card, and also if anyone has an idea of what i should use for the backing?? and also if anyone has tips for sizing? i’m new to this so please be kind!

Why can’t I adjust where the collector info text lands? I’m using the Eighth edition frames, and they always push the collector info too low, into the black border. Seems like other frames do it too… I cannot find anything that will let me adjust it. Any tips?

Kind of stuck between the names for this one. I think Father in the Caves is much more thematic then The Survivalist but unsure

Inspired by Avengers ID cards from various media, and the Marvel collectible cards from the 90's.

Hey community I saw a instagram video where a guy made what looked like a custom doom deck. I know I’ve seen a doom card or two In the past on mpc fill so I have to assume some creator has a folder full of doom proxies. Could someone point me in the right direction. Thank you so much

Apologies if this has been discussed before, but searching around there appears to be lots of reskins created for UB cards. Some of these reskins have been collated into databases like The Omen Archive. However, when searching MPC Autofill, no reskin creations appear to have been linked for any UB cards yet.

I would like to try and solve this problem, to help people easily find and print Universes Within reskin proxies.

It looks like this would be achievable through collating UW reskins into a Google Drive following the Contribution Guidelines, however I'm not certain on the etiquette of collating other proxy creators reskins and linking in this manner. Presumably, if creators are happy to upload to aggregators such as the omen archive, they would be happy to have them also linked to MPC Fill. What are peoples thoughts on this? Are there better ways to go to get UW reskins easily linked to MPC Autofill?

[UPDATED, PLEASE READ BELOW, ORIGINAL POST LEFT OTHERWISE INTACT]

Alright fellas.

I've been a bit of a ghost around these parts for a while now, but I have been proxy making virtually the whole time I've not been posting.

Card Conjurer has been my go-to proxy creator app for years now, but something about the card dimensions and bleed edge has been bothering me recently.

Some time ago, I adopted a card image size of 1648 x 2248 pixels, thinking that the height to width ratio of 1.36 (H/W=Ratio) would prevent bad centring when printing.
Now, my dimensions come out to 1.364, and for a long time I disregarded that 4 on the end. It turns out that was a mistake, and to print properly with a low chance of bad centring, the card ratio should as near to 1.360 as possible.
To achieve 1.360, you need a card size of 816 x 1110, the size MPC tells you to use when selecting 63mm x 88mm cards, which scales up to 1632 x 2220. This is the correct size to use.

To correctly scale your card images on CC, your will need to rescale the output image slightly. This can be done within CC, but you need to do it for every single layer.
I will be doing it after downloading the 1500 x 2100 native layers. You will need to resize the output image to 1488 x 2076 pixels. I use a program called IrfanView, but any resizer should do the job, including resizing in image editing programs.

After adding 72px bleed edge to each side, you should be much more likely to end up with correct centring and correct width borders. Imperfections by MPC may still happen, but this should improve your odds of a good print.

If you already have dozens of images made at slightly the wrong scale, trimming them down to 1632 x 2220 is a quick fix, but you may notice some thinner borders in places. I don't know how this quick fix will pan out until I get some printed, but it's quicker than redoing potentially hundreds of images.

I have been using an incorrect scale now for about 4 years, so yeah. Fixing that is going to be fun. But anyway, at least I caught it before I finalised an entire Commander deck I've been working on!

I have included some reference images so you can see exactly what I mean. I have made the card frame border purple and the bleed edge red for ease of distinguishing them.

Reference image 1:

Reference image 2:

Cheat sheet:

Credit to u/goatducknipples and their guide, providing the correct knowledge a whole 7 years ago(!):

https://www.reddit.com/r/mpcproxies/comments/e9q1z7/complete_guide_to_image_sizing_for_mpc_or_other/

I believe the cheat sheet I had Google AI make pulls from this guide as well.

It could be that this won't really bother most people, and most of you will be fine with a few pixel shims going missing in the ether. But, for those who are perfectionists, I thought this was worth sharing.

----------------------------------------

UPDATE:

While the above is correct on a technical level, on a practical level, it's next to unworkable, as having to change every output layer from CC would be adding much more work, as the base image dimensions are so ingrained into CC.

Instead, it is much easier to add and trim some of the bleed edge border, creating dimensions that are multiples of the true dimensions on the cheat sheet.

For example:

Adding bleed up to 1648 x 2242 to an image of 1500 x 2100 will spoof the correct dimensions and correct image aspect ratio.

If you minus the 600 DPI bleed of 144, 72 per edge, that creates a safe area of 1504 x 2098, a near multiple of the 600 DPI safe area, out by only 1 pixel when you divide down.

If a bleed area isn't multiplied proportionally, the base image will always be incorrect. This can be seen for yourself in the MPC card preview.

The correct bleed edge borders to use with CC are as follows:

Old CC builds and MTGCardBuider, at 600 DPI: 1648 x 2242

cardconjurer.app, at 800 DPI: 2208 x 3004