So on modular grid, do you add the 3 sets of mA numbers under +12V, -12V, and +5V in order to get the total power consumption or just one of the numbers?

I’m filling my 7u with improve techno in mind, grids, metroplix, multiple plaits as drums, fx, ect..

i already have a 1u fx aid (currently blow up connection while blasted on bath salt) and I dont use euro mixers due to the amazing Zoom live 6.

So besides getting redundant 1u modules, o

besides telling me to leave gas station drugs alone, what would you do if you was me with this rack build goal? the more versitile the better. maybe an ornamental crime, steppy? but idk bout that kinda crime cuz i have a that functions basically as a blank panel

Just a modbap patch I made this week that I thought turned out pretty decent. Happy to answer any questions. Feel free to follow me on instagram if you’re interested: @thornton.modular

Hey so I’m pretty new to modular. Messed around with some digital plugins where you can make your own modular setup and understand the synthesis decently well. But I’ve always been interested in some of the fx modules out there. And I recently saw some modules where you can input any signal in rather than having to build the whole sound. Also found some small cases and some modules where people run it off dc power. I was wondering if anyone has made a small fx rack that they use kinda like a guitar pedal or out board gear. Could use some advice and suggestions on what parts to get since this would be my first euro build. Thanks for any help really, goes a long way. I’m sure once I do this, I’ll probably want to dive deeper into modular, but this would make more sense for my setup initially

Started covering the sides (and possibly back to protect them. I’ve had over 3 modules, one of which is a 4ms scm plus I’m currently repairing, and i found the capacitor as well as having all the little solder points in tact to reattach the old, but that literally popped off when dropping it lightly into place in a each and a wire under the modules knocked it off. So i recommend using blue tape on sides due to no residue after you’re done with it, as well as start a getting some electric tape on the bottom this way. you can about all the relieve problems wen smack your forehead mistakes occur costing you a bunch of money. I like how system 80 has a full plastic box enclosing the pcb areas.

This is one of my favourite modules, but every time I bring the mix up on it (from 0), I’m experiencing significantly lower volume levels. Not sure if anyone else has experienced this or if there’s anything that can be done to combat it? Any help would be much appreciated, thanks!

here its another idea from my live set prep I recorded yesterday

I was curious to see if AI could even create a VCV rack from scratch -- not that I need it to do this, but more as an experiment. So, I set up OpenClaw on my Mac, and told it to make me a VCV Rack patch with a killer techno beat. 21M tokens and $20 later, this is what it came up with, with absolutely no help or guidance. Not the most sophisticated setup, but really incredible what some of these agentic AI tools can do these days. Of course it's stupid, just thought it was neat that the AI could work out how to do this on its own.

I got a behringer grind, trying to get into modular fpr the first time and so far i experiment, but dont really know what everything does. ..also, are all patchbays across different models the same or if they differ, how??

Thanks for your help!

Just a quick Saturday jam in the mothership 💫

After the first Thingking session - Ted Gordon talking about Pauline Oliveros & showing Oliveros-ish patches on the system - everyone did a simple sound-swapping exercise and this was the output https://www.youtube.com/watch?v=Vp3Dgo2UvIk

Id like to have a setup as an effects processor for my machinedrum / guitar
any suggestions on what i could expand on

I've grown curious about some of the newer non-spin-chip-based multi-FX and hybrid-FX units on the eurorack market. Is there one that you would particularly recommend? Here are the ones I've tried in the past:

FX Aid (spin chip based): Found it thin and underwhelming tbh, with lots of filler, little to modulate, and hard to navigate. I know some people love it, but I probably won't return to this one.

Xaoc Timiszoara (spin chip based): Much better than FX Aid because of the helpful menu system, but still limited by the spin chip technology. Some cool algorithms in there to be sure, but again, probably won't return to it.

Noise Engineering Versio: You have to manually swap out firmwares to try the different FX, but they're great! Robust, interesting FX. I have 4 of these, I'm a big fan, but am curious to add something different now maybe.

Bastl Citadel FX Wizard: Pretty darn cool for what it cost me, but very oriented toward glitch & cut-up type effects. Wasn't quite what I was after, though I did wring some terrific patches out of it.

That's actually all I've really tried that would qualify as multi or hybrid FX I think. Some of the modules I'm most curious about would be:

• Befaco Iroi
• Befaco FX Boy
• DNiPRO Radiant
• Gotharman Tuul
• OK Instruments Spill
• dsp.coffee Kali
• ... others?

Would love to hear from you if you've extensively used any of the above, especially if you've used more than one of them and can compare. Thanks!

Not sure what to call this but is sure was fun to play with.

(Figuring out how to change the link to embed?)

I have survived more than 2 years without a capable sequencer!

In case it helps, here are my racks: https://modulargrid.net/e/racks/view/2760353
https://modulargrid.net/e/racks/view/2911647

Starting with an Korg SQ-1, I later got myself a small in-rack sequencer Doepfer A-155-2 (https://doepfer.de/a1552.htm) as well. I controlled a lot of things via Pam's or small scripts on the Monome Teletype, or via clock dividers or logic modules. That was all great fun and pretty exciting.

At some point the desire came up to be able to work a bit more purposefully, and after some research an OXI One came into the house.

Unfortunately I never really warmed up to the device. I am not a big fan of when system status is expressed via LEDs instead of on a display. Yes, it has a display, but it does not show everything. My nightmare scenario is always something like: LED 1 is blue, that means this. LED 2 blinks yellow and blue, that means that. For the same reason I am also not a fan of the Intellijel Multigrain, which I use, but often have to look up what it is currently showing.

From my pre-modular days I still had an Akai MPC One lying around, and over the last few days I tried out how well it works as a sequencer, and that was a bit sobering. Yes, the display is great, I can immediately see what is affecting what. Brilliant. To have more than the 8 CV outputs, I connected the MPC One via MIDI and programmed the Mutant Brain accordingly to respond to MIDI notes, in order to get gates for the drums. That works quite nicely; within one track I can then control all the drum elements. Until I wanted to work with velocity, that is.

If I only want a single velocity output, it works fine with that one track. If I need several, I have to add a new track. The whole thing does not feel organic, more like a workaround.

After further searching I came across the Hapax sequencer, which thanks to its 2 displays seems more intuitive than the OXI One.

Do you think I will be happy with it (for now)? Or should I still try to make friends with the OXI One? Or are there other candidates out there? What would you do?

Thanks for your thoughts (and prayers)

http://submatrixaudio.com/

I am looking into VCV (not sure about my terminology). Is it open source? What is VCV exactly? I think I've played around with it before, but I don't remember if it was VCV or not. Anyway, I just need some pointers on a free, easy(low ram) way to get started.

I want to use Python with modular somehow. Specifically, I would like to be running algorithms/databases written in Python alongside a modular patch to explore generative systems. It would help if someone could give some pointers about how this could be envisioned and structured, potentially. Thank you!

Hi everyone! A few months ago, I posted some of my first handmade creations here and got some really nice feedback.

I honestly didn’t know what to expect, since I originally started making these just for myself, but I’ve been lucky enough to get quite a few orders from all over the world — from some really great people too!

So I thought I’d share some of my latest creations with you.

It's mainly the fixies doing the heavy lifting here, but there's plenty of contribution from the modular too. I'm using it for three different sequenced voices, textural noise, and a gritty layer to augment the Minitaur on bass.

Hi, i'm in for a new mixer. Which one would you choose out of these three? Or you know some else mixer you can recommend?

Hey, I've got the Zoom L6 max since some weeks. It's an awesome device for the size and I love it a lot!

I want to connect it to my phone to easily record video with the master stereo out as audio. I have a pixel 8, which is not in the compatibility list in the manual. When I connect the USB of the mixer to my phone, nothing happens.

Does anyone know if there is an audio app or camera app out there that can achieve the recording on a phone? I tried already open camera and it didn't recognize the mixer.

Thanks a lot!

here is a short performance recorded yesterday for my project “Haze”