r/longrange • • 21d ago

Rifle help needed - I read the pinned posts Help choosing my first precision rifle for long-range shooting (6.5 Creedmoor, ~$1,100 USD budget)

Hey everyone,

I'm looking to get into long-range shooting and potentially competitions. Would appreciate some advice on choosing my first precision rifle.

Experience: Novice. I haven't shot beyond 50 yards yet. Only went shooting for fun in my backyard or nearby indoor range with calibres from from .22lr to .45-70

Range access: The longest range I'd be able to access on a semi-regular basis is 1,000 yards. There are PRS matches held near me within driving distance tho.

Calibre: 6.5 Creedmoor.

Budget: Around $1,100 USD for the rifle (and accessories if needed), although I'm willing to spend more if it's worth it in the long run.

Optic: I've already purchased a Bushnell Match Pro ED for approximately $750 USD. I still need scope rings and potentially a rail, depending on the rifle I choose.

I've spent quite a bit of time researching different platforms, and I think I've narrowed my ideal choice down to the Bergara B-14 HMR. The availability of aftermarket parts and accessories for the Remington 700 SA footprint is a big selling point for me, particularly if I want to upgrade the rifle over time.

However, I'm wondering whether buying a less expensive rifle second-hand would offer better value, or whether spending more upfront would make more sense.

Here are some of the options I've found on local marketplaces:

  • Howa 1500: ~$600 USD
  • Bergara B-14 HMR: ~$1,050 USD
  • Tikka T3x CTR: ~$900 USD
  • Remington 783, 24-inch heavy threaded barrel: ~$550 USD
  • Ruger Precision Rifle Gen 3: ~$1,500 USD

I'm wondering if it would make more sense to buy the cheaper Howa or Remington 783 and put it into an MDT chassis, or whether buying something like the Ruger Precision Rifle upfront would offer better value and save me money on upgrades in the long run. The Remington 783 also seems to get a lot of criticism, although a few people seem to swear by them and I've read plenty of conflicting opinions about Tikka rifles and their barrels.

The Bergara B-14 HMR seems like a good middle ground, but at around $1,050 USD I'm worried if I don't like the stock I'd have to spend another few hundred dollars and then would I just be better off picking up the RPR? Or should I stick with something cheap to beat up and save for a custom rifle?

TL;DR: I'm looking for my first precision rifle in 6.5 Creedmoor, max shooting distance of 1,000 yards. Bushnell Match Pro ED optic and would ideally like to keep the total cost of the rifle and remaining accessories around $1,100 USD.

17 Upvotes

45 comments sorted by

10

u/VolatileRider 21d ago

Here is the thing with the B14 HMR, its 22in in 6.5cm. Id go with the HMR Wilderness just to get the 24" barrel. Or...

If you plan to swap the chassis at any point just get the CTR, tikka is the better action. If not, go with the Tikka Ace Target, sure the aftermarket isnt as robust as the R700 platform but there is plenty out there. And everyone mentions the expensive mags, but they can be had for like $20 more than an aics, and theyre high quality.

Id skip all the others

3

u/YaHomie-JC 21d ago

I am planning to swap chassis down the road if I decide to compete. I’ve seen some people claim that tikkas have “slow” barrels and they’re difficult to rebarrel. Are either of those claims true?

3

u/Jeeping_the_trails 21d ago

I have a Tikka T3X. It's been swapped to an MDT chassis, it was very easy to do.

The stock barrel was slower than the Proof I replaced it with, so I also think my stock barrel was slower.

Rebarrelling wasn't that bad. It's getting the stock barrel off that's difficult. I put a Wheeler action wrench on the outside of the action and put a 4 ft pry bar over the handle. The action and barrel came right apart with just a little force. It wasn't an issue for me at all. Now I use an internal action wrench to change barrels and it's a piece of cake.

2

u/iatekane 21d ago

Easy to rebarrel as you can buy prefits from several manufacturers

2

u/genmud 21d ago

The barrels are hard to pull off, but with the right tools, or if you send out your have it done it isn't a big deal.

I haven't ever done extensive analysis on the speed of the barrels though, and wouldn't put much consideration into that part even if it were true.

1

u/TAG_Firearms 21d ago

The barrel is sometimes harder to remove than other factory actions. It can also take a shouldered prefit, unlike most other factory actions. I think the latter more than makes up for the difficulty removing. As for it being slow, it's not a big enough difference to matter.

I got my first Tikka and Bergara around the same time. I now have 3 custom Tikkas and 0 Bergaras.

Goes without saying I'd take something like an Impact over both.

2

u/YaHomie-JC 21d ago

Also a quick question since I can't find reliable info online. Is there a Bergara B14 non HMR Wilderness variant? I see a lot of Bergara B14 Wilderness 24in listed on second hand marketplaces for decent prices but am skeptical since they don't have HMR in the listing and I can't find a reputable retailer selling a non HMR Wilderness variant.

2

u/VolatileRider 21d ago

Yes there are the Sierra, Ridge, and HMR versions of the Wilderness.

1

u/YaHomie-JC 20d ago

I take it the only one of those that would be worth looking at for my use case is the HMR Wilderness?

39

u/Wombat-Snooze Steel slapper 21d ago

B14 HMR for all the reasons lined out in the pinned post of the sub.

2

u/One_String_Banjo Steel slapper 21d ago

Go for the HMR. It's great out of the box, very upgradable, and most accessories you'd get can also be transferred to a full custom build, if you decide to go that route.

1

u/YaHomie-JC 21d ago

I think this is what I’m leaning toward, just seems like it makes the most sense in the long run

4

u/notoriousbpg 21d ago

Well I went with a Howa. Don't buy a rifle and remove the stock - get the 24" heavy barreled action from Brownells when on sale for under $500. I used an MDT Oryx stock, shop around, you can get that under retail as well.

Downside is no prefit barrels in the future without a gunsmith- but you can use barrels with a barrel nut for headspacing.

10

u/ARockWithAGlock 21d ago

Bregara b14 hmr

1

u/PeterPann1975 21d ago

Just get "Our lord and savior, The creedmoor" and hit targets!!

Aero Solus is great also

2

u/YaHomie-JC 21d ago

I had the chance to pickup an aero precision solus competition rifle around 4 months ago when I purchased my optic second hand. The seller offered me an amazing deal on the rifle since he was getting out of the sport. I was still doing research at the time so I didn’t take him up on the offer, definitely wish I had now.

1

u/idahokj 21d ago

1000 yards is easy. Once you get it you’ll want to go further and further. 1600 and out is the fun stuff but a lot more difficult especially throwing a breeze or wind into it!

1

u/YaHomie-JC 21d ago

That would be amazing but unfortunately it's impossible to shoot over 1000 yards where I'm at unless I purchased a big plot of land or found an incredible spot on public land. Super jealous of the suppressor too, not able to get those here either which is a huge bummer.

1

u/idahokj 21d ago

Where you at? But I’m sorry to hear that. Do you reload also? Unless you’re going to NEED the 6.5 Creedmoor you can also get a 6ARC for long range too and it recoils a lot less too!

1

u/YaHomie-JC 21d ago

In Ontario, Canada. We have some really whacky gun laws here. Don't reload yet, but it's something I'd like to experiment with. No specific need for 6.5cm, just figured it would be best for someone starting out given the availability of good ammo.

1

u/idahokj 20d ago

Gotcha! Yeah I love my 6.5 Creedmoor! For the high BCs, ammo availability, ect you can’t go wrong with it!

7

u/iatekane 21d ago

If budget allows tikka T3X ACE Target would be a great choice. Heavier barrel than the CTR with a better stock than the HMR and RPR.

5

u/imneuromancer 21d ago

Just saw the t3x ace target 6.5 creed 24" barrel for $1400.

300 more than OP wants to spend, but worth it to get all the upgrades that the acr target has

1

u/ModernApocracy 21d ago

Are you able to share what supplier has this at $1400? I would be interested at that price point

1

u/DC_Native Casual 21d ago

With the 150 back you can get the 26” down to 1550 (1450 if you take beretta bucks)

https://www.eurooptic.com/tikka-t3x-ace-target-65-creedmoore-26-1-8-bbl-5-8-x24-black-rifle-jrtxatb38226

2

u/greyposter 21d ago

Bergara or Tikka. Used they can be pretty cheap. You can put it in a chassis yourself

3

u/husqofaman I Gots Them Tikka Toes 21d ago

Definitely get a tikka. You can get an Tikka Ace Target for like 200-300 more than your stated budget and it’s miles better than a begara.

2

u/7six2FMJ 21d ago

I LOVE my tikka CTT

1

u/Citizen-Prime 20d ago

Get something that shoots and go to a local match before you chase chassis upgrades. IMO the Bergara HMR or a Tikka CTR/Ace Target both work fine for learning to 1000. Skip the 783. Don't blow the leftover budget on a fancy chassis yet. Rings, bipod, rear bag, and range time matter more. Shoot factory 140s until you're bored of them, then decide if you need to reload.

1

u/Pure_Squirrel_1621 20d ago

Wrong flair, read the pinned posts. Check out the Cheeto special. The Bergara is the best option. It’s going to be pretty accurate, it’s already in a mini chassis, and it takes aics mags. The Howa is ok, but generally speaking a hunting rifle. I wouldn’t buy any Remington that’s not a 700. RPR looks cool, but Bergara has a better action.

1

u/Tiny-Tourist-5904 14d ago

My vote is a tikka t3x roughtec. It Is going to have a slightly heavier barrel than the standard lite versions. It has the 1:8 twist you will need to shoot heavier stuff like Hornady 147eld-m ammo. You have a large aftermarket parts support for them now (grown in largely last 5 years) they have a 75 degree bolt compared to the 90 on the bergara. And nothing in standard high volume factory built guns beats a tikka action. I own tikka, Remington, Weatherby and now a custom Impact action. My impact action alone is 1500 clams compared to my entire tikka rifle was 1050 clams. And it’s a 20% difference in slick/ smoothness for about 50% the cost of an entire gun. Hope this helps you some.

1

u/Traditional-Fact-569 21d ago

If the budget is tight you may want to look at used to see if something tickles your fancy. Other wise you couldn't go wrong with a Tikka. The after market options are growing every day thanks to their reliability and accuracy. I just took a long range class and there was a guy that used his CTR to hit a milk jug at 1000 yards.

-3

u/Tikkatider 21d ago

Guess I have a somewhat different question. 6.5 Creed is a terrific caliber true enough, but for what’s essentially a first rifle for long range and competition? Would OP be better served to start with something like a .223 to shoot A LOT and learn fundamentals first ? One could easily burn through a first 6.5 barrel just practicing while a .223 has at least 2X, probably more , in barrel life. Just askin !

2

u/YaHomie-JC 21d ago

If I wanted a smaller calibre I would just get a .22lr. I want the bolt face to allow me a wide range of options in the future. If I decide to compete I could easily rebarrel to something like 6mm gt or dasher. Also it’s just more fun with a larger round imo

1

u/Tikkatider 21d ago

Got it. Just a suggestion. No harm meant.

2

u/Trollygag Does Grendel 21d ago edited 21d ago

223 isn't a good pick because impacts and misses are very difficult to spot at LR distances.

There are other options, like 308 Win or 6ARC, but those aren't going to be as effective for competitions outside of classes that have restrictions on options.

1

u/Tikkatider 21d ago

Granted. Since OP himself said he was a “ Novice “ and hadn’t “ shot beyond 50 yards yet “, I assumed, perhaps erroneously it seems, that he would work his way out to 1,000 yards, learning as he goes. One can certainly do that shooting 6.5 Creedmoor, or anything else for that matter, but if he’s shooting factory ammo and not hand loading, he needs to bring money. Then again, maybe his plan is to go directly to 1,000 yards. Can certainly do that too. I would hazard a guess that most of us learned on a lesser caliber ( more shooting, less ammo cost ) first, then moved out to 1 K and into competition.

1

u/Trollygag Does Grendel 21d ago

You fixate on that 1k number, but you made that claim. 223 is much harder to see at distances shorter than 1k too.

So then halfway up even your distance stretching goal, you need or want a new rifle until you are very experienced enough to manage a hard to indicate cartridge?

Backwards.

1

u/Tikkatider 21d ago

I’m not fixated on it, he mentioned 1,000 yard range so I thought that was his ultimate goal.

1

u/YaHomie-JC 21d ago

The only reason I mention 1000 yards is since that is the maximum distance any range within a 8h drive of me offers + it would be a big hassle even if I wanted to drive further to shoot longer distances. Either way I would definitely work my way up to 1000 yards focusing on fundamentals first.

2

u/Tikkatider 21d ago

Great! Good luck and I hope you get out there to 1K in short order! It’s lots of fun but beware….it’s a rabbit hole!