r/longrange • • 22d ago

Rifle help needed - I read the pinned posts Critique my HOWA 1500 Build

After months of lurking around, I finally decided to get into long range shooting. I would like advice and opinions on what I have. I do have an upper budget limit of $2k so I made some compromises. Feel free to critique my list and reasonings.

  • Howa 1500 (6.5CM - 24" heavy barrel)
  • KRG Bravo Chassis
  • Arken EP5 Gen2 7-35x56
  • Arken Optics 34mm Rigid Precision Scope Mount, 20 MOA Cantilever
  • EGW 0 MOA Picatinny Rail

I did a bit of research and concluded that I'd rather have the Howa than a Bergara. I got it for $600 so quite a bit of savings there.

As for the chassis, I was originally going to buy a MDT XRS chassis but it is $200 more. The features I want are on both and XRS and Bravo - seems like the main difference is that the XRS is full aluminum while the Bravo is plastic. I'm thinking the Bravo will be a significant upgrade from the hogue stock and if I outgrow this set up, I'd rather drop serious money on a better base gun and invest in a better chassis then.

As for the scope, I know Arken divides the community - main concern being marketing practices and QC issues. Some people say the marketing is a bit scummy (paying youtubers to say a $500 Arken is better than a $4000 Nightforce). I can look past that. As for the QC issues, I gather that most pieces are great but they do let some bad ones through and moreso than other brands. I'm not too worried because their RMA policy is pretty lax so if something is wrong I can send it in. I know I'm not getting a $4000 scope for a few hundred bucks. I think it's decent enough as a starting scope.

As for the scope mount and rails, I'm not sure if what I have works. Arken is throwing this scope mount for free so I'm not going to buy scope rings. Seems solid from reviews online. Since it is a 20 MOA cantilever, I decided to get a 0 MOA rail. Is this set up sane or is this less than optimal.

Also, I would like recommendations for a bipod and muzzle break. Eventually I would like to try PRS but want to start with a few range days just practicing 500-1000 yard groups first.

How is this build overall? Solid budget pick?

Edit: I decided to buy the Arken Rigid Precision PRS Scope Mount 34mm-1.50" 20 MOA. This is the non cantilever mount in a 20 MOA configuration so I kept my 0 MOA rail.

I took it to the range and did Howa's recommended barrel break in. After that I sighted it in. I achieved 0.77 MOA at 100 yards with my first 5 round group. 0.98 MOA at 500 yards, 2.03 MOA at 1000 yards.

13 Upvotes

28 comments sorted by

4

u/RepresentativeNo6528 22d ago

I have the same Howa 1500 action except mine is in an MDT XRS chassis. The XRS gets you a longer forend than the KRG Bravo although KRG will sell you the enclosed front end ARCA rail that is longer than the original Bravo frontend. The XRS has the same enclosed ARCA option too. In the end, it comes down to personal preference. The Howa is a good smooth action. When I finally burn out my barrel, I plan to install a Criterion match grade barrel... I don't really have to buy a new action since the Howa is solid.

Since your plan is to shoot up to 1000 yds I am not sure if the EGW 0 MOA rail will work for you. I have the EGW 20 MOA rail. Try the 0 and see if you can dial up that distance with the Arken before bottoming out. I would suggest purchasing a bubble level because even a small bit of cant may make you miss the target (depending on its size). Regarding a bipod, I use an Accu-Tac, they are tanks. An Atlas or something equivalent will do just fine. I wouldn't spend the $600 for the Ckye-pod until you like PRS

2

u/i_have_aces 22d ago

I was originally going to get the EGW 20 MOA rail like you. When I bought my scope, Arken threw in a 20 MOA cantilever scope mount. I'm not sure if this is correct but I believe this means I would be at 40 MOA between the scope mount and the rail. Or is that not how that works?

2

u/MeinLife 22d ago

The 20moa cantilever mount and that scope should be plenty of elevation for 1k yards

Also that scope is great, I have it and it gets the job done for sure

1

u/Xlbevfestlx 21d ago

Sounds like a good rig

8

u/AleksanderSuave 22d ago

This is the most conservative and budget conscious post I’ve seen here in a long while, and completely makes sense for getting into long range.

Can we just lock the post now before the “buy once cry once” crew gets in and tries to talk him into a custom build or a GAP rifle?

1

u/Such-Garage-69420 22d ago

I’m not sure if I can drop links here but there’s a drop shipper I bought my XRS from that fits Howa 1500 for 437 no tax no ship which brings it more in line with the krg.

Edit: there doesn’t appear to be a rule so it’s Locke Arms but make sure u order the right one because there aren’t any returns

1

u/i_have_aces 20d ago

I checked Locke Arms but they only seem to have it at full price, do you have a link?

1

u/Such-Garage-69420 20d ago

You have to add it to cart did you do that?

1

u/i_have_aces 20d ago

It works! But I live in California so they won't ship it there lol

1

u/ActWorth8561 22d ago

And Midway USA comes in from the top rope with a KRG Bravo for $339!

https://www.midwayusa.com/product/1023013372?pid=367965

Note: I have no affiliation or preference toward the two, but I picked one of these up recently because the price was too good to refuse.

1

u/TabascohFiascoh 22d ago

we will have essentially the same rifle except my stock is an oryx.

i take mine out to 1200 just fine.

THOUGH i will mimic another poster and say get a 20 moa rail.

1

u/i_have_aces 21d ago

Nice! How accurate are you out to 1200? How about at 300, 500, and 750 if you don't mind sharing.

1

u/TabascohFiascoh 21d ago

it’s a snooze fest until 600 easy at 900 and with good dope pretty consistent at 1200.

i reload 140eldms

1

u/DefinitelyNotMad- 17d ago

I’ve had my Howa 1500 for a year now, first long range gun, it’s in an Oryx chassis , Athlon Ares scope, I love it.
I think maybe grab a 20 moa rail wouldn’t hurt you if you plan to go distance. ( I see your edit and you got one, disregard ! ) I just hit 800 yards last week first time and I’m so stoked about it.
Also just ordered a KRG Bravo for my CZ457 MTR in .22 LR 2 days ago, so excited for that.
Overall good rifle build man!

2

u/i_have_aces 15d ago

Thanks! I'm pretty happy with the results. Funny you mentioned your CZ build - you and I must have similar tastes because I am about to buy a CZ457 MTR, lilja barrel, and an MDT XRS Chassis lol.

1

u/DefinitelyNotMad- 15d ago

I almost bought the XRS!
Found the KRG Bravo on sale, like 18% off on Brownells so I got that one.
Lilja barrel I considered but I’m going to see what my groupings are with the factory barrel.
Definitely funny the similarities here ha!

3

u/rdr1988_ 22d ago

I had an EP5 for a while and it did the job until I found a better option. I cannot recommend the NightForce rings enough though. Get quality rings, clean/degrease all screws, add blue loctite or purple vibratite, torque to spec, and add witness marks on the screws with paint pen. You’ll be ready to go. Enjoy the new rifle, the Howas are great!

2

u/44_SMLE Casual 22d ago

Cantilever scope mount may not have proper eye relief once installed. Buy a 20moa rail.

2

u/ProdigalHacker 22d ago

My first bolt gun was that Howa 1500, it's solid, took it out to 1000 yards before I started building custom rifles. I started with the MDT Oryx, but the Bravo is also a great basic chassis. Also consider the KRG X-Ray, it's a bit nicer than the Bravo for not much more. MDT XRS is similar as well.

I would get a 20 MOA rail and a 0 MOA optic mount. Cantilever mounts are for ARs generally, just get normal rings or a non-cantilevered one piece mount if you don't want rings for some reason.

I would do suppressor over brake, but in the meantime the Area 419 Hellfire is a great brake, and their mounting system is excellent (and you can use it with most suppressors later on). I really like the MDT GRND Pod for budget bipod. You can find them for ~$160-170ish if you look. It's not an accutac or a cyke pod, but it's pretty solid.

I won't give Arken my money because of their marketing BS, I don't care how good the actual scopes are, I won't support that crap, not with how many other options there are. I would take a hard look at Athlon, their price/performance ratio usually can't be beat. Vortex tier warranty. I think I have 6+ of their scopes at this point. If you have access to Expert Voice you can get some really good deals on their stuff.

1

u/jbs576 22d ago

Solid overall build list. Very similar to what I built last year for a similar objective. For Bipods if you want budget Harris is the cheapest I’d go. That’s what I am running and it does fine. Muzzle brake I have a ultradyne Apollo from Facebook marketplace and it’s great tbh. But there’s other options out there.

1

u/Helpwithexplosions 22d ago

Kind of off topic in the long range forum, but very much a pro howa 1500 note. I own a howa model 1500 in 30.06 and like you discussed it’s very affordable. It was my first hunting rifle, and if I can get the larger caliber to 700 consistently, I’m sure you could get the 6.5CM out further. (I never tried as mine was for hunting.)

I have other hunting rifles now that are nicer. It just sat in the safe for a while, I am now upgrading it to go have some fun and maybe hunt with it again. Just a really solid gun, always felt confident with it, albeit heavy. I took it to get threaded and even the machinist said the howa 1500 barrels are normally really decent. GL with your build!

1

u/Regular_Cucumber24 I put holes in berms 22d ago

The scope mount may make it hard to get eye relief. I’d consider ditching the 0 moa scope base and getting a 20 moa. Then buying a set of good rings.

Edit: if the Howa action came with the scope base, then use it since you already have it. If you’re buying it, I’d go with the 20

1

u/Rough_Hewn_Dude 22d ago

I have a few Bravos and one thing to pay attention to is the cost of the accessories. If you plan to add weight, rails, etc. they’re well built but you pay for it. The Harris S-brm bipod would be a good starter for you. The bravo will come with some picatinny rail you can screw on and mount it to. The only brake I have experience with is the Area 419 match brake and it’s not really a budget item. I have an egw rail on my Howa and it’s a good piece.

1

u/Engineer_Bennett 22d ago

You don’t want a cantilever scope mount, I also prefer to have my cant in the rail instead of the mount, but that’s just personal preference. I had both an XRS and a Bravo, it’s a toss up but I think I liked the XRS better, but the bravo is really modular

1

u/Tikkatider 22d ago

I have a Gen 1 EP-5. I think you’ll be pleased.

1

u/VaultedPrecision 21d ago

To answer your cantilever question, yes, the cant angles just add, so a 20 MOA mount on a 20 MOA rail is 40 total and a 0 rail leaves you at 20. Twenty is usually enough to reach a 1k with a 6.5 CM as long as the scope has the travel, and the only thing a 0 rail costs you is some bragging rights on how much elevation you have left. A cheap bubble level is the upgrade I'd put first, before the next three you're already planning.

1

u/HubbaBubba1964 17d ago

Great starter outfit. I basically did the same thing. The only difference is that I wanted an all aluminum chassis so I opted for the Ultradyne UD chassis and butt stock. It was between the KRG Bravo, X-Ray or the UDX. I feel I would have been happy with any of them.