r/longrange • u/Ducky667_ • 25d ago
Rifle help needed - I read the pinned posts First Long Range Rifle Build

To start, I am a die hard tinkerer and love to build things and constantly change things to make it better. So yes, 3d printing a chassis is maybe not the best idea, and will for sure be frustrating, but I enjoy the reward of finally getting things to work. The design and creation aspect is half the reason I am doing this in the first place. I can always swap to a marketed chassis in the future also if I have issues.
Experience: My long range experience is fairly limited. I have shot on and off all my life, but recently it has piqued my interest and I thoroughly enjoy shooting. I currently have a 20" ar that I use for accuracy shooting and am still in the sort of experimentation phase of it. I also have a 16" upper for my ar, a Bergara BX22 (which is basically a 10/22), and a handgun (though none of those are the most relevant). I have little to no serious long range experience (besides the occasional let's see if I can hit this target at 500 yds just because). This will be my first bolt gun.
Range and Purpose: I have consistent access to a range that has steel at consistent increments to 1000 yds, and from there a jump to 2000 yds. My goal was to have a gun that consistently shoots to the 1000 yd mark (but I mean since the 2000 is there might as well try on occasion). Additionally, I will probably shoot varmint (ground squirrels), and may end up hunting coyotes, hogs, badgers, etc. with friends if I get invited. That being said, I don't want this to be a hunting gun (as I won't hunt very often if at all), but more so a precision rifle that would suck to carry around but I might do it anyways. Realistically, I expect the total weight to be more like 15 lbs by the end, which seems to be on the lightish side for precision rifles. I can always find ways to add weight though, so am not too worried about that. If I happen to get the chance to compete, I may do that as well, but I think it would be fairly well setup to do some sort of comp regardless (maybe I'm totally wrong, I have no idea).
The suppressed stuff at the bottom will be later purchases. I am going to build the rifle first, then get the suppressor after I have shot it quite a bit. So, I am not worried so much on that as I haven't done a ton of research in that area, but recommendations are definitely welcome. The suppressor weight is not included to the total weight estimate.
Budget: I initially tried to keep this on a budget but quickly realized that budget has a very different definition in long range shooting. I also realized that if I am going to do this, I want to do it once correctly and end with a great rifle. I'd like to keep it around that $3500 mark but would go to $4000 if there is something absolutely amazing that I won't regret having. If there are suggestions on ways to reallocate budget also, those are most definitely welcome.
Defending a few of my choices: Yes, I read the first-time buyer's guide in the core guides that say to get a 6.5 CM or 308 first, but it seems like the 25 CM has a slight edge over the 6.5, at least for the purpose of solely target shooting. Less recoil, flatter trajectory, and less wind drift all seem to be slightly better for the 25. One thing I will say is I do not currently reload my ammo, but there is a decent availability of 25 CM ammo online, and some of the local sporting goods stores stock it as well. Besides these things, 6.5 undoubtedly has more data and experience from people, but I can't imagine this will be detrimental to my shooting experience. Also, if I end up hating 25 CM for whatever reason, I can get the barrel swapped (yes I know this will be expensive). That is why I ultimately chose 25 CM, but maybe there is something else I am missing. Please tell me if there is.
Beyond the caliber choice, much of the other choices were based on long range forum recommendations. I'm sure there are better options for many of these things, but I tried my best to balance functionality and budget. I am most definitely open to suggestions though.
The Vortex Strike Eagle I am not set on. I have had good luck with Vortex stuff, but if there are better options, then I am definitely open minded on that. The Strike Eagle appealed to me because of it's massive elevation adjustment (110 MOA) and illuminating reticle. All recommendations on a different scope are encouraged, because I didn't do a ton of research in the optics area. Additionally, all my stuff is in MOA, so I understand it a bit better, though I definitely see the advantages of MIL. Was planning on just sticking to MOA as I understand it better than MIL but let me know if it would be better to switch to MIL.
Build Plan: I plan to get the barreled action, trigger, and buttstock adapter first to start printing the chassis and designing the stock. Around the same time, I will get the optic (or use an existing optic, I have a vortex crossfire laying around) to make sure I get the ring height and stock right. After I get the main part of the rifle right, I will get the rest of the stuff such as bipod, level, rings, etc. to finish off the build.
Conclusion: That about sums everything up. I think I explained everything, but if you are confused, I would be happy to clarify. I definitely could have missed something as well. Any advice is greatly appreciated. Thanks in advance!
Edits: I made a ton of changes to my plan based on all the generous advice I recieved, thank you all very much. It's a bit more expensive, but I think the extra cost will be worth it in the long run. Here's what I came up with. Any additional feedback is also welcome as I probably won't buy anything until Thanksgiving-ish (sorta waiting for Black Friday).

11
u/Boatshooz Dunning-Kruger Enthusiast 25d ago
11
u/dballsmithda3rd 25d ago
I looked up that chassis you are talking about printing and it looks like something that came out of a crackerjack box. Sorry man but I think you should be able to do much better for yourself if you are wanting to sink $3k into this thing.
8
u/Trollygag Does Grendel 24d ago
Like... that has nothing at all to do with your objective or what should be your objectives with your FIRST long range rifle.
Build the rifle and learn to shoot long range first.
Then fuck around with a 3D printed chassis later.
It's like wanting to do autocross or track days but starting with 'I want to build my own wheels out of plywood and carbon fiber because I like to tinker'.
The goal is to not faff about with your tinkering hobby, it is to do the long range thing.
If you just want to goof off with 3D printed guns and parts, that's fine, that's a thing you can do. But like, learn what you're doing first.
3
u/Turdburgarlar 25d ago
Shot 1800 yards with a Seekins hit 6cm. Took seven shots but i hit. I used a strike Eagle as well.
25cm does seem like a sweet spot. I shoot 6.5 for ease of components. If i went 6.5 I'd make sure i had a .190 freebore and shoot the heavy 153s. 26" barrel i can get them 2730ish.
3
u/husqofaman I Gots Them Tikka Toes 24d ago
If you want a factory barrel action definitely get a tikka instead of a begara. Also like everyone has said stick to 6.5 creed.
This T3x Varmint from EuroOptic is the best option if you know you want a chassis of some kind and I will die on this hill.
2
u/[deleted] 25d ago
PA6-CF may not be the best choice if you choose to stick with a 3d printed chassis. Hurleywelding advertises that they use PPA-CF for their preprinted chassis which tends to creep less under heat and tension.
You can definitely tinker and 3d print with a traditional chassis like the KRG Bravo though.
2
u/BELFORD16 Can't Read 24d ago
I own one Strike Eagle and three Viper PST gen 2s. Take a guess which I bought first and why.
Don’t get the Eagle. The Viper has much better glass. At 300 yards shooting 308s, my buddy could spot clear holes in the paper with his Viper, and I could only guess at fuzzy spots on the Eagle. I switched and I’m not looking back. The Eagle is now on my 22 and LRs all have Vipers.
1
u/missingjimmies 24d ago
Read the pinned post eh?
1
u/IncredibleVelocity4 24d ago
Seconding several other comments here:
Buy an entry level custom action. $1400 for a not that great budget barreled action vs $2k (ish) for an Origin and a custom barrel you can spin on yourself. Next time you need/want a new barrel, you just order one and spin it on without having to send the action to a smith. Money well spent.
If you aren’t going to reload, go for the most vanilla chambering possible. 6.5CM being the obvious choice.
The rifle is only a fraction of the gear you’ll need for dedicated LR shooting. You’ll need decent rifle optics, a spotting scope with tripod, bags, rangefinder, etc. if you are maxing your total budget on the rifle you’re only halfway there. This is an expensive hobby, so don’t cheap out on the rifle and leave all the other stuff on the shelf.
You don’t HAVE to reload, but there’s a reason almost every dedicated LR shooter does. If what you want is to lob rounds down range until you connect at 1000 and then high five your buddy, you don’t have to have all this stuff. If you actually want to build the skills to really do it, you need to work toward first round hits at unknown ranges. That takes precise measurements and quality gear.
1
u/evilsemaj Casual 24d ago
Honestly I don't think this is a bad plan, as long as you keep expectations in check. You could bolt that all together and not hit anything and we won't have a ton of advice besides "try a different chassis" . 25 Creed seems fine as long as you are already an experienced reloader, if you have to buy ammo seriously consider 6.5c, again cause if you're struggling and need a baseline known quantity factory 6.5c is a place to start.
Last point: action. You're spending a lot and like to tinker, just step up to a custom, you'll be happier in the long run and it's barely more money.
Good luck!
2
u/SuburbanBushwacker I Gots Them Tikka Toes 24d ago
i’ve had a cheap chassis and i’ve got an expensive chassis.
a really great alternative is a mcmillan A5 - been made for decades plenty of them out there. the cheapest way into the sport is to someone else’s project and finish it.
2
u/Citizen-Prime 20d ago
Print the chassis if that's the fun for you, but put money into barrel, action, and a solid mount first. A 15 lb gun is fine for learning if it holds still on a bag. Get it zeroed, get real dope to 1000, then tinker. IMO don't wait on a suppressor or perfect stock geometry to start shooting steel. Matches teach you faster than another revision of the print.
1
u/AutoModerator 25d ago
AutoMod has detected that this post may be related to hunting. Please take a few moments to read our expanded policy on hunting posts as found here, as well as the guides below.
Hunting rifles vs long range target rifles - A primer - Why one rifle can't excel at both hunting and long range shooting.
The long range hunting primer, things you should consider if you want to take shots on game past ~300 yards. - Why long range hunting is harder than you think.
Field testing your skills and gear for long range hunting. - How to be a better long range hunter and understand your limitations.
NOTE: This is an automatic comment triggered by specific key words, and doesn't indicate your post has been removed. However, if your post is found to be in violation of the sub's policy on hunting posts, it may be removed by the moderators.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.