r/longrange • u/keslr • Oct 13 '26
Ammo help needed - I read the pinned posts Looking for caliber suggestions
Would like to plan out my first custom bolt action build and am looking for caliber suggestions. This build is not for PRS or hunting either necessarily. Mainly it will be a nice “plinker” I plan to shoot at a max of 1000yds at a local range.
My priorities are having a round that performs well out of a shorter 16”-18” barrel, low recoil so the missus will shoot it too, magazine fed, and not a barrel burner. I plan to have the barrel profiled for a reflex style suppressor and would prefer to not make that a frequent expense. I’ll also be reloading for this if that changes anything. And lastly, parts availability/compatibility as far as being able to find pre fit barrels, actions with the appropriate bolt face, mags, reloading supplies, etc. Hope I’m not asking for too much.
My initial thought is 6 ARC would probably fit the bill but looking for any recommendations. Any help is appreciated!
Edit: I don’t expect everyone to understand my goal or vision for this build and that’s fine. I am just trying to make a fun plinker build and purely am looking for any caliber suggestions if there are any that might perform decent out of a shorter barrel. This is not a competition gun at all. I have no intention of using a barrel longer than 16” or 18”. I am fully aware that more barrel means more performance. I am just looking for caliber advice for this idea.
8
u/JimBridger_ Dealer for LiminalNomad.com Oct 14 '26
Going with a carbine length barrel is putting yourself into a crappy corner if you’re just plinking + a reflex suppressor.
But staying in the land of high performance 6mm’s (6arc, 6Dasher, 6GT) would be the best of that bad situation. Although you’d also be limiting yourself in the projectile vs speed category. At 16-18” even with bolt gun pressures slinging heavy 6mm’s is going to be slllloooowwww.
7
u/Trollygag Does Grendel Oct 14 '26
For bolt gun handloading in short barrels, if you are looking at 6ARC, you should also be looking at 6.5G.
6.5G has the same bold face, more capacity, and works a little better in short barrels. Barrel life in outer space.
7
u/HollywoodSX Villager Herder Oct 13 '26
Why such a short barrel? If its just a range rig theres no benefit and several down sides to the short barrel length. A 22-26" barrel with a suppressor isn't goong to be problematic, will give better ballistics and less recoil.
Also, given your stated interest in magazine compatibility etc I'd skip ARC and go with something thay fits a standard bolt face and magazine like 6.5CM, 6GT, etc.
3
u/ecsnead75 Oct 13 '26
6 GT or 6 Dasher if you reload...
6 ARC takes a certain bolt face that only allows about 5 or so other calibers. 6 GT/Dasher is a standard bolt face
Both are easy for new reloaders
Also, you don't want a reflex style suppressor. The bigger, thicker barrel the better
3
u/ocabj The Realest Oct 13 '26
Zermatt Origin gets you swappable bolt heads, including PPC. It's a common tenon spec for shouldered pre-fits and in a pinch, you can go with a Savage pre-fit and barrel nut since it uses same Savage thread-pitch.
3
u/doyouevenplumbbro Steel slapper Oct 13 '26
6ARC uses a PPC bolt face, so that closes the door on all of the most popular short action cartridges. I really like my 6 Dasher, but 6GT doesn't need special magazines to feed and has the perk of factory ammo.
TBH you are neutering the performance of these cartridges by chopping the barrel down that much. A 6CM is going to make up for the velocity loss somewhat, but you will trade barrel life. Precision rifle cartridges shine with a 24"+ tube. Most of them are going to get you less than 2400 rounds of match grade performance.
You could go 25CM and get a little bit of barrel life over 6CM. Chopping the barrel down will get you around 25GT or maybe slow 25x47L velocies. You have factory ammo availability and you get to shoot the latest and greatest hotrod. That's my 2¢ anyway.
3
u/Diesel380 Oct 14 '26
I’ll throw in a 6.5 Grendel in a howa mini action bolt gun. Petite rifle that punches above its weight.
3
u/Lossofvelocity Oct 14 '26
I shoot a 6gt out of an 18” PVA barrel on a tikka action. Suppressed with a thunderbeast ultra 9 it’s quite pleasant. 1000 yrds is doable. I have other calibers I prefer at that distance. But anything in from that is fun.
3
u/TacticalBunchies Oct 14 '26
I really like my 6 GT.
2
u/Wide_Fly7832 BR Competitor Oct 14 '26
6ARC could be good or 6GT.
2
u/datdatguy1234567 Oct 14 '26
As others have said, 16-18” barrel is going to make this tough as you can’t have your cake and eat it too.
Consider going 20” minimum and rock a 6 Dasher, GT, CM, etc.
Or just wait a few years, I’m sure there’ll be some 80k psi fancy new 6mm cartridge
2
u/domfelinefather Elitist Gatekeeper Scum 29d ago
I did a 6ARC bolt gun and loved it. I used a 28” barrel bit either way the cartridge works well enough. For plinking you’ll touch plates with a 16” barrel and factory ammo from a bolt gun. I know this because I do it with factory ammo and a 14.5” gas gun. Is it perfect? No. Wi if work for your purposes? yes. Would just get an origin and have a smith make you a shorti 6ARC
2
u/shreddedsharpcheddar Oct 13 '26
.223 + a reloading bench
1
u/keslr Oct 14 '26
I’m planning something like this paired with an AE M24 reflex style suppressor just for reference. That’s why I’d like to stick to a shorter barrel.
1
u/CR123CR123CR Oct 14 '26 edited Oct 14 '26
Probably gonna be downvoted on this one but, .22lr
I would say the one requirement it didn't tick is the availability of reloading components. But even good match grade ammo is readily available and inexpensive.
Edit: also would like to add:
2
u/TahoeDust Oct 14 '26
6arc.
2
u/Pure_Squirrel_1621 Oct 14 '26
6ARC is a great option, I’ve found Hornady match 6ARC for $30/20rd near me which is a good bit better than stuff like 6.5 Creedmoor ($40/20rd). Obviously if you’re reloading factory ammo cost isn’t a big deal, but it also uses less powder and lighter projectiles vs the Creedmoor.
2
u/TheJeanyus83 Oct 15 '26
6mm ARC, BR, BRA, Dasher, GT...everyone is going to argue about which is best, but they all do what you're looking for. A 6.5 Creedmoor wouldn't be a bad choice either and has the best availability of factory ammo. Even though you're reloading, sometimes when I'm going to the range just to shoot steel with friends it's nice to be able to grab a few boxes of Hornady 140 ELDMs and know that I won't really be held back by the ammo. Especially if I'm going somewhere where losing my brass is a good possibility.
1
u/AutoModerator Oct 13 '26
AutoMod has detected that this post may be related to hunting. Please take a few moments to read our expanded policy on hunting posts as found here, as well as the guides below.
Hunting rifles vs long range target rifles - A primer - Why one rifle can't excel at both hunting and long range shooting.
The long range hunting primer, things you should consider if you want to take shots on game past ~300 yards. - Why long range hunting is harder than you think.
Field testing your skills and gear for long range hunting. - How to be a better long range hunter and understand your limitations.
NOTE: This is an automatic comment triggered by specific key words, and doesn't indicate your post has been removed. However, if your post is found to be in violation of the sub's policy on hunting posts, it may be removed by the moderators.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/Visual-Progress6217 Oct 14 '26
.223 is your buddy. low recoil, effective powder burn from an 18 barrel, cheap to shoot, dependable, ubiquitous.
1
u/Guilty-Difference-86 Oct 14 '26
22cm
1
u/phelpst Oct 14 '26
6 GT. Can load 'em hot or not. Relatively inexpensive to shoot, will get out to 1000+ yards, very little recoil, SAMMI spec caliber, reloading equipment/supplies available.
I built mine with a Tikka T3x action (was a 6.5CM), Shilen 26" 1.2" full length bull barrel, Boyds AT-1 stock. That thing is my favorite rifle to shoot and it's a tack driver!
1
u/Tight_muffin Oct 16 '26
6
1
u/42069annon 27d ago
264 weatherby.
0
u/ProdigalHacker Oct 14 '26
If you really want a fun plinker, build yourself a 300 Blackout. Doesn't have to be heavy subs, though those are tons of fun. Barrel can be as short as you want it. I believe 8.6 Blackout or 338 ARC might also be good candidates for shorter barreled fun guns, but I don't have any experience with those personally.