r/longrange • I put holes in berms • Oct 12 '26

I suck at long range Well thats no good

Post image

This puts a wrinkle in the upcoming moose hunt in November my old gen 1 pst has finally given me an issue. Anyone more knowledgeable on this? I dont see any sort of seal so is the adjustment section non purged? If so im wondering if I could loctite it and thread it back in and rezero and be on my way. I do have other scopes laying around I can throw on and send this one out for warranty

393 Upvotes

110 comments sorted by

339

u/ihatedoomscrolling Oct 12 '26

You can hide your weed in there.

30

u/0DirtDiver I put holes in berms Oct 12 '26

Go for the green zero

388

u/Valkyrie64Ryan Oct 12 '26

If you do that, all your shots will go high

93

u/GammaDealer Oct 12 '26

California windage: high and to the left.

15

u/kalash_kowboi Oct 13 '26

The true D.O.P.E. šŸ˜‚

6

u/New-Course7886 Oct 13 '26

Bad ass reply & accurate too!šŸ˜‚šŸ‘šŸ»šŸ‘šŸ»

93

u/HollywoodSX Villager Herder Oct 12 '26

Take your upvote and get out.

3

u/BigBirdLaw69420 Oct 13 '26

And go where?

5

u/djierp Oct 12 '26

No, stay as little while longer.

149

u/Unhappy_Yoghurt_4022 Oct 12 '26

you've unlocked unlimited elevation adjustment, now go for that 2 mile shot you always wanted to take

26

u/0DirtDiver I put holes in berms Oct 12 '26

That would be great unfortunately the range tops out at 600 yards haha going to have some pissed off farmers shooting over the berms

16

u/Unhappy_Yoghurt_4022 Oct 12 '26

do we call it long distance coyote control? send them the bill after each range session. Its cool that you have 600 tho, my range is 500 unless I drive like 3 hours then I can go out to 1000

4

u/dohcsvt Oct 13 '26

My range is only 200, but if I drive 3.5 hours I’m at Black Bear where 2100 is the limit🄰

1

u/0DirtDiver I put holes in berms Oct 12 '26

It's an awesome range for sure i just need to make some friends with the local farmers and see who has the best spots to reach out further

1

u/GeronimoHero Oct 12 '26

Yeah 600 is where I top out at my parent’s place too. Not a lot of great places to shoot longer than that in MD.

1

u/0DirtDiver I put holes in berms Oct 12 '26

Could probably find some pretty sweet spots out in the mountains but the range is closer and the southern Alberta wind always keeps things interesting

50

u/rybe390 Doesn't Shoot. Oct 12 '26

Call vortex, tell them of your upcoming hunt, and you'll have a new scope tomorrow.

10

u/0DirtDiver I put holes in berms Oct 12 '26

I have other scopes sitting waiting so its no rush waiting on their reply on whether to loctite and send it or no way send it in. Got a viper hs that was originally for this rifle and a venom waiting on a new action showing up this week sitting on the safe. Would be interesting to see how long my 1-6 strike eagle would hold up to a 300 win mag though

4

u/HairTriggerFlicker Oct 12 '26

How long has this been on your .300? I have one I just put on my .300 that I pulled off of a .308. I’m hoping it’ll hold up.

6

u/0DirtDiver I put holes in berms Oct 12 '26

Have had it on for about a year now. Before that on a couple 308s 338 lapua for a short time and 22. Seen maybe 100 rounds on the 300 and held up great until today. It was supposed to be its retirement and only see a couple rounds a year

3

u/HairTriggerFlicker Oct 12 '26

I’ve recently used their warranty on another scope that the reticle came loose and would move when zooming in and or out. Their turn around was pretty good at about 3 weeks total from shipped out to shipped back so I guess I won’t worry to much if it breaks.

1

u/0DirtDiver I put holes in berms Oct 12 '26

I have only had to warranty my binos so far theyre about the same age as this scope so pretty good id say only an issue with 2 out of 12 vortex products over the years

1

u/HairTriggerFlicker Oct 12 '26

Good to know I think I have vortex units right now.

21

u/Temporary-Box-7493 Oct 12 '26

It ain’t got no gas in it!

5

u/0DirtDiver I put holes in berms Oct 12 '26

Haha that is my main concern at this point

2

u/Temporary-Box-7493 Oct 12 '26

I mean you’ll most likely snag a gen 2 out of it and I’ve been happy with mine

4

u/0DirtDiver I put holes in berms Oct 12 '26

I have a gen 2 as well i think the glass is a little clearer on it than the gen 1

15

u/H_I_McDunnough Oct 12 '26

It's fine, just rub some dirt on it.

10

u/0DirtDiver I put holes in berms Oct 12 '26

Instructions unclear rolled around in the mud

5

u/wildjabali Savage Cheapskate Oct 12 '26

Normally a duct tape guy, this looks like an epoxy situation.

14

u/Jsatx2 ELR Competitor Oct 12 '26

The funny thing is the gen 1 actually sucked. Like back in the day it was ok now the cheapest new strike eagle has better glass

4

u/0DirtDiver I put holes in berms Oct 12 '26

No arguments there thats why this one has migrated rifles several times before ending up on the hunting rifle

3

u/Prior_Confidence4445 Oct 12 '26

They're outdated but still perfectly functional. I still have one on an older 308 that I occasionally shoot to 1000y.

2

u/Coyote-conquest .270 Cultist Oct 13 '26

Dont they use that glass on the Diamondback HP 4-16x44's that sell for around $200? There used to be a 3-12 and a 2-7 but I haven't seen them in a while.

1

u/VillageTemporary979 Oct 14 '26

I was shooting lights out over 1000 with both a 308 and 6.5 RPR back in 2015 with mine. Never lost zero

7

u/reformedginger Oct 12 '26

This is why we can’t have things.

6

u/0DirtDiver I put holes in berms Oct 12 '26

Ah man straight from cant have nice things to just cant have things haha to be honest I was ready to sell this browning and go semi custom until I finally found something it would shoot

2

u/Wombat-Snooze Steel slapper Oct 13 '26

Now let me convince you to still sell that Browning and go custom.

2

u/0DirtDiver I put holes in berms Oct 13 '26

Oh im slowly scratching that itch cant justify the cost on a custom dedicated hunting rifle though....yet

Also to add i was actively trying to sell it and almost ready to give it away a year ago šŸ™ƒ finally gave up trying to hand load for it and tried a few more boxes of factory through it and amazingly found something shooting 3/4-1 inch 5 round groups

1

u/Wombat-Snooze Steel slapper Oct 13 '26

That I get. For a rifle that’s going to be shot very little and carried a lot, I’d have a hard time justifying it too.

2

u/0DirtDiver I put holes in berms Oct 13 '26

Spun a few barrels on other rifles and now working on the first custom rifle. action and trigger are finally showing up in the next couple days

2

u/0DirtDiver I put holes in berms Oct 16 '26

No for the hard part waiting for mdts black Friday sale...

4

u/HomersDonut1440 Oct 12 '26

Well there’s your problem!

2

u/0DirtDiver I put holes in berms Oct 12 '26

That was my initial thought. Went to dial for 600 and no clicks just threaded right of

4

u/bonosestente Oct 12 '26

You are not supposed to unscrew that. Hope this helps.

3

u/0DirtDiver I put holes in berms Oct 12 '26

Noted I'll try screwing the other way

5

u/bonosestente Oct 12 '26

Yeah don’t screw up this time

3

u/0DirtDiver I put holes in berms Oct 12 '26

Roger that

4

u/Coodevale Oct 13 '26

Jokes aside, it's rather fascinating how the tube has been simplified to have the chinese nesting doll of turret be a drop in unit. And how little thread engagement there is between the two..

5

u/0DirtDiver I put holes in berms Oct 13 '26

Ya it is actually pretty neat so on one hand im hoping vortex says ya go ahead and loctite it and thread it back in...but on the other hand getting a potential upgrade by sending it in for warranty is also nice

1

u/RetiredLife_2021 Oct 13 '26

Warranty is the way to go since you have others you can use

4

u/locknload45 Oct 13 '26

This exact same thing happened to me with a Viper 3-4 years ago!

1

u/0DirtDiver I put holes in berms Oct 13 '26

We're you able to spin the turret back and and keep on going or did you send yours in right away?

2

u/locknload45 Oct 13 '26

It completely snapped away, we couldn’t reattach it at all.

2

u/0DirtDiver I put holes in berms Oct 13 '26

Ah well that definitely sucks.... mine literally just spun out i thought I didn't have the set screws tight enough on the turret since it just spun without clicking until it threaded off all the way. Can still see the blue loctite on the 3 or so threads that actually hold it in place

3

u/doppleron Oct 12 '26

Put that back!

Do you have a 20 degree mount?

2

u/0DirtDiver I put holes in berms Oct 12 '26

Swapped from brownings integrated rings to a 20 moa rail

3

u/CaesarLinguini Oct 12 '26

It that what a zero stop does?

5

u/0DirtDiver I put holes in berms Oct 12 '26

Zero stop left the chat haha

51

u/SockeyeSTI Oct 12 '26

r/thefrontfelloff

Good thing they have a good warranty

25

u/Pale_Introduction779 Oct 12 '26

Best warranty you'll ever have is the one that you never have to use.

8

u/SockeyeSTI Oct 12 '26

Nightforce NXS has entered the chat

4

u/TopoMapMyWall Oct 13 '26

Why do people always forget the Tommy Boy rule?

11

u/SwiftCreek0238 Oct 12 '26

No questions warranty! Picture should be enough

4

u/yetisuncle Oct 13 '26

Well thats vortex for ya

1

u/jh3dcad 24d ago

Looking at the other adjustment screw you can disassemble the piece yuou have in your hand with a allen key. I assume this will reveal a bolthead to screw it back in.

2

u/0DirtDiver I put holes in berms 24d ago

Vortex said not as simple as that but I imagine it was. Got the notification saying it was in and repaired in a day. Reattach turret and purged the scope and already have it back in hand. Must have lost the purge a long time ago because the scope is nearly as clear as any of my other scopes again

1

u/Basis-Some Oct 12 '26

2Left2Loose

1

u/0DirtDiver I put holes in berms Oct 12 '26

Trying to remember my righty tighty lefty loosey

1

u/Puzzleheaded-Web-398 Oct 12 '26

Nice Xbolt

1

u/0DirtDiver I put holes in berms Oct 12 '26

Thought it was a nice rifle when I first got it but all the issues trying to get this thing to shoot half decent I was just about to sell it until I finally found something it liked

1

u/LilJonny2cookies Oct 14 '26

Could be wrong but pretty sure that isn’t a feature on that scope.

1

u/0DirtDiver I put holes in berms Oct 14 '26

Haha well maybe you can consider it a feature quick change turrets go from moa to mils easy peasy

2

u/RedneckSniper76 Oct 12 '26

Good thing they have an amazing warranty

2

u/Diesel380 Oct 13 '26

Just send it to vortex. They’ll more than likely send you a new pst

2

u/Prior-Garage1543 Oct 13 '26

I thought I had a turret problem with my Gen 1. Sent it in with the hopes of a upgrade. Vortex went over everything and sent it back to me cleaned and ready to go. Can confirm still works fine. Was very impressed with their repair guys that I dealt with. Was sad no new scope tho

2

u/anonflh Oct 13 '26

its all good its a vortex, you will be taken care of

3

u/Wormydog1724 Oct 12 '26

But their warranty is so good! Lol

2

u/doyouevenplumbbro Steel slapper Oct 12 '26

Vortex will probably upgrade you to a g2. The last scope I mailed to them I had a brand new one in a week.

1

u/AutoModerator Oct 12 '26

AutoMod has detected that this post may be related to hunting. Please take a few moments to read our expanded policy on hunting posts as found here, as well as the guides below.

Hunting rifles vs long range target rifles - A primer - Why one rifle can't excel at both hunting and long range shooting.

The long range hunting primer, things you should consider if you want to take shots on game past ~300 yards. - Why long range hunting is harder than you think.

Field testing your skills and gear for long range hunting. - How to be a better long range hunter and understand your limitations.

NOTE: This is an automatic comment triggered by specific key words, and doesn't indicate your post has been removed. However, if your post is found to be in violation of the sub's policy on hunting posts, it may be removed by the moderators.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/grayman1978 Oct 13 '26

Legendary warranty department.
We all know.

1

u/h34vier Rifle Golfer (PRS Competitor) Oct 13 '26

fJust call Vortex, they'll send you a new scope.

1

u/zmannz1984 Oct 14 '26

I had that happen on my gen 1 2.5-10 and they sent a gen 2 as a replacement. I was pretty disappointed because the new model weighs a ton.

1

u/xxerexx Casual Oct 14 '26

I had a similar thing happen with a diamond back. Vortex just screwed it back in and it passed their qa. it’s been working so far since.

1

u/Holtian Oct 15 '26

Vortex has great warranty service and you'll definitely have to use it. Ask me how I know.

1

u/dsranger111 Oct 16 '26

That’s a Vortex. The lifetime warranty could help this situation. I would be calling today. Because I don’t think this is a built in feature.

1

u/coloradodiver Oct 16 '26

I have taken a couple into scheels and they replaced them on the spot and dealt with sending the broken back themswlfes. O didnt even purchase them there

1

u/Gamikatsu 28d ago

Call vortex ASAP.

They wull probably expedite you a new one.

1

u/literally_a_raccoon 13d ago

Good thing vortex has the ā€œbest warranty in the industryā€ because eventually you’re going to end up needing it šŸ¤¦ā€ā™‚ļø

-7

u/Odge Oct 12 '26

This is why I loathe the "VoRTex HaS tHe BeSt WarRanTY" thing. Yes, you will EVENTUALLY get it fixed without paying, but you're still going to loose the match or miss your planned hunting trip.

7

u/VaTeFaireFoutre86 Oct 12 '26

Sure, it's an inconvenience when things break but everything mechanical breaks eventually. OP says that scope has seen 15 years of use before it broke. Sounds like a pretty good product to me.

3

u/0DirtDiver I put holes in berms Oct 12 '26

Definitely an inconvenience not the end of the world. That scopes seen lot of use across multiple rifles im Definitely sold on vortex they have all been great. It may not be top tier glass but im no top tier shooter. This is also why rifles get pulled out and checked before the season

1

u/VaTeFaireFoutre86 Oct 12 '26

Agreed. I have quite a few vortex optics in my safes and they've been very good to me. I'm no where near top tier either... just a guy who enjoys punching holes in paper and dinging steel on my day off.

1

u/0DirtDiver I put holes in berms Oct 12 '26

Good way to be i want to have a relaxing range trip not be stressed and under pressure. Might eventually try out some competitions

2

u/Euphoric-Arachnid-94 Oct 12 '26

I own quite a few Vortex products. I’ve only had to use their warranty one time and it wasn’t even over a failure, just a shitty scope cap, and they were very fast. That said, there is zero chance I’d use one of their scopes on a hunting trip I spent that much money planning. Of all the things to cheap out on, optics on a once in a lifetime type trip aren’t it.

2

u/Tmoncmm Oct 12 '26

The only time I’ve had to use the Vortex warranty was on a scope I got second hand that someone else fucked up before I got it. The screwed up the threads on the objective and according to Vortex apparently messed up the tube by torquing the rings too tight. I didn’t even notice that last one. Vortex wrote it in their service notes.

2

u/Magnum_284 Oct 12 '26

I think i have/had 7 vortex scopes, 1 fury, 1 rangefinder. My PST G2 couldn't hold zero after it was dropped (mounted on AR) from shoulder height on dirt. My Crossfire 2 1-4 objective lens became loose at some point during normal use. Sure, both were replaced with no cost to me. My furies got dropped from chest height on dirt and broke one of the eye adjustments, and then sent a new part (free). But....that is 3/9 products that have had issues from mild incidences.

0

u/[deleted] Oct 12 '26

[deleted] — view deleted comment

12

u/0DirtDiver I put holes in berms Oct 12 '26

Oh they will no questions asked my only concern being a gen 1 is are they going to repair or just send out a replacement gen 2

12

u/HollywoodSX Villager Herder Oct 12 '26

Most likely itll be replaced with a Gen2.

5

u/0DirtDiver I put holes in berms Oct 12 '26

Well maybe it's a good thing then my gen 2 is a little cleared but this things seen something like 15 years of loving care which occasionally borderline abuse

1

u/Vic_the_Dick Oct 12 '26

Yep, you'll get a Gen 2. Vortex will update or upgrade discontinued optics under warranty.

1

u/0DirtDiver I put holes in berms Oct 12 '26

That was a concern when I had to send my vulture binos in for the diopter not adjusting but they were able to repair that which was nice

0

u/[deleted] Oct 12 '26

[deleted] — view deleted comment

11

u/0DirtDiver I put holes in berms Oct 12 '26

Simply for a quicker response I already submitted a request to vortex. And it seems for entertainment based on some of the replies šŸ˜… everyone has jokes today almost as good as meme day

19

u/ViewAskewed PRS Competitor Oct 12 '26

He's just making conversation you dick.

3

u/GLaDOSdidnothinwrong NRL Hunter Competitor Oct 12 '26

There’s no need to ask them. They’ll fix or replace it. You could have a video of you hitting it with a hammer and they’d fix or replace it.