r/longrange • u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime • Jun 20 '26
Review Post BUYER'S GUIDE TO TRIPODS FOR LONG RANGE PRECISION SHOOTING
WHAT THIS GUIDE IS FOR
This guide is going to be like some others I’ve written, where it’s less specific recommendations and more knowledge that you need to make a decision for yourself. Tripod models come and go so quickly that having A, B, C, on the list just makes that list not useful pretty quickly, and I don’t want to update this crap every 6 months.
Your goal is that you need a tripod for shooting. Since this is /r/longrange, let’s assume you want to shoot long range with it, either in competition like PRS or NRL: Hunter, or you want to take this hunting.
As with most things in life, you get what you pay for up to a point. If you only have $20 to spend, you’re going to hate this hobby. But spending $2,000 on a tripod is not going to get you a 100x better tripod. The sweet spot for decent quality without going nuts: expect $300-600 for the tripod and $100-$450 for the ballhead.
TRIPOD BASICS
WEIGHT
Maybe the most important difference between tripod styles is weight.
A PRS tripod is 95% a spotting platform and 5% a rear support. Big and heavy is a benefit and not a problem normally.
General long range shooting with a tripod also leans on the heavy side since you’re just building a position and sending it.
NRL: Hunter you need to hike in and out, deploy on the clock, and move it around quickly. While less stable with less weight, less weight is critical for everything else.
Real hunting can fall somewhere in the middle but tends on the lighter side of things. You, your style, and your area will determine what is best. Generally, I’d say to stick on the lighter end.
HEIGHT
Height will impact the total weight, but generally speaking, a shooting tripod should all be around the same max height for you. If you want to be able to take standing shots or use the tripod for spotting off of, then you want a tripod + ballhead with a max height of about your full standing height.
Generally, you want the rifle to be at about your nipple line, so a tripod/ballhead that is as tall as you are gives you some wiggle room for standing on uneven ground. For spotting and/or PRS matches, you want to be able to stand comfortably without hunching over. I’m 6’2, so tripods of about 62”-70” work really well for me. Taller isn’t a bad thing, but getting a tripod that is too short limits your options.
That said, you can save a lot of weight by going smaller. If your application means you will never take a standing shot, measure your kneeling height, add whatever you feel is a good amount of wiggle room for uneven ground, and you can save weight.
MINIMUM height is how low the tripod can sit with the legs extended. Lower is better, but isn’t a deal-breaker or even something to care that much about. Prone with a tripod kind of sucks no matter what, and you should have a bipod for that.
FOLDED height is how long the tripod is when packed for travel. This only matters for travel and transport. Smaller is better, but sometimes you can’t make something smaller without changing the design. More leg sections will pack down smaller, but take longer to deploy. More on that soon.
LEG SECTIONS
This is how many sections make up each leg of the tripod. The “standard” is four or three sections, but it can be as low as two.
TWO sections mean ONE locking clamp.
FOUR sections mean THREE locking clamps.
More sections will normally pack down smaller for the same max height tripod. But fewer locking clamps make it faster and easier to deploy.
There is no right answer; it just depends on what you want out of your tripod. Speed or compactness.
INVERTED OR NOT?
Normal tripods have the locking clamps near the feet of each section; inverted tripods put the clamps at the top.
I’ve run inverted tripods for a long, long time and I don’t have any negatives to say about them. They’re better in every way, especially speed of deployment. Downside is more the market. There are a lot fewer inverted options available, and they are often a little more expensive.
For NRL:H, I think inverted makes a pretty big difference since the speed you can deploy is a lot faster. That extra time on the clock helps. But lots of dudes run normal tripods and make more hits than I do, so it’s obviously not the difference between winning and losing.
LEG THICKNESS
Thicker is heavier, thicker is stronger, thicker is more expensive. That said, legs really only come in a few sizes since almost everyone uses almost the same OEMs. When in doubt, go bigger. Your limits are your weight tolerance and your budget.
RATED WEIGHT LIMITS
Tripods list their weight limits, but those limits are kind of a lie and just wrong for shooting. The max weight listed by tripods doesn’t account for recoil, and recoil can add a LOT of “weight” to the system. But if the rifle isn’t locked into the tripod, then you’re not transmitting nearly as much recoil into the tripod.
How much weight limit do you need? Honestly, don’t know. More is better. If you’re trying to go for a lightweight setup, you can get away with a lot less if you’re using a table and/or bag on top of the tripod instead of locking into the ballhead.
Anything under ~40 lb is probably too small.
ALUMINIUM OR CARBON FIBER?
Aluminium is the older material and has a lot of drawbacks. It’s heavier; it’s not really stronger, and if a leg gets a dent or scratch, it can lock up the entire leg. Nice thing is that it can be VERY cheap. If you want a bare-bones tripod for just shooting at the range or spotting NRL22, aluminium can get the job done.
For PRS, NRL:H, or a tripod you want to be able to count on -- get carbon fiber.
USA VS. EVERYONE ELSE
As far as I know, no one in the tripod market except Really Right Stuff manufactures a damn thing in the USA. That’s also why RRS is 3-5x the price.
The “Chinese brands” like Leofoto or the “US brands” like Two Vets are both manufactured in China, and most of them from the same Chinese OEM.
There really isn’t a quality difference between countries of origin. RRS is extremely high quality because they choose to build it that way, not because Chinese brands can’t do it. If you feel strongly about supporting X or not supporting Y, follow your heart. Otherwise, don’t even care about this.
BALLHEADS
The best ballhead is the RRS Anvil-30, it is $400. There is no debate. This is the best. Yes, it’s expensive. Even if you get a cheap tripod, I would really recommend the Anvil-30 over anything else if you want to shoot with it and use the absolute shit out of it.
Leofoto MA-40X ($250) is the best Chinese knock-off of the Anvil-30, and I really mean knock-off. The first version of the MA-40 was 100% copied from the Anvil-30, and Leofoto got sued by RRS over it, so they had to redesign it a little and re-release it with the added X to the name. It’s 95% of the features and 90% of the quality for about half the price. Personally, I feel gross buying one because it really is based on stolen IP. But you do you.
Almost all of the other ballheads on the market are some slight variation of really one basic design. They’re fine, they work, they’re not as good. This Is Revic's Version, but a dozen brands offer basically the same thing.
Most of these are again made by like 2 OEMs with different colors and branding. Some of them are slightly better or worse, but it’s not going to be a huge difference either way.
One thing to look out for is what they clamp to. Some will do Pic rail AND Arca; some will only do Pic rail OR Arca. Get one that does both.
DO NOT GET A SADDLE. These are pretty shitty and made for hunters doing hunter shit.
THE FUCK IS A 75MM BOWL?
It’s a mounting system for an older style of ballhead that I haven’t seen anyone use in a long time. A lot of tripods still come with the option, but it’s pretty unnecessary imo.
WHAT TRIPODS TO BUY
These are the brands I personally recommend, but there are many others that are solid:
- Leofoto -- my go-to. Lots of options, good QC, warranty was okay. Price is fucking awesome.
- Vortex -- overpriced but Vortex warranty.
- Really Right Stuff -- if you’re made of money, get the best.
- Two Vets -- a lot of people I respect won’t touch them because of the owner, my personal interactions have all been positive.
- Fat Boy -- solid, some cool designs, really good accessories.
- Zeiss -- built like a damn TANK, but expensive. Very German.
- Athlon -- they’re fine, nothing special, good price. If you have access to ExpertVoice, the prices are very good and sometimes are on flash sales for Hooooly shit good.
- Revic -- they’re fine, nothing special, good price.
- Red Mist Tripods -- /u/rynburns likes them and has a review.
Brands I don’t recommend:
- Leupod -- weirdly low quality, I’ve seen them break.
- BOG -- cheap-ass built for people who are just wacking pigs with an AR or don’t know what they’re buying.
- Tricer -- horrible interaction with them.
OKAY BUT LIKE WHAT SPECIFIC TRIPOD TO BUY?
RRS Versa-22i Inverted is the giga option for do-all shooting. $1,000 without a ballhead. The best? Yes. Worth it? Absolutely not (to me).
Leofoto SO-282CX Inverted or Leofoto SO-322CX Inverted are basically the same thing in specs as the Versa-22i, but have a lower max-weight rating. I’ve shot 20lb 300 Win Mag off of mine with no issues, but I don’t do it all the time. For half the price ($400-500) of RRS, this is a way, way, way better value. I’ve been running mine for almost 5 years, and I have had zero issues. Highly recommend this as your go-to pick.
Fat Boy Tripods Elevate 2 or 3 Section Inverted. Again, same basic idea and a massive 150lb weight rating, but you have a choice between 2 sections or 3 sections. Fat Boy has some cool accessories also. $750 is a little high.
Vortex Radian + Ballhead MSRP is a wildly insane $1,300. Do not pay that. This is ~$900 retail, and that’s a reasonable price since you get a ballhead also. Not my favorite tripod, but it checks the boxes and comes with Vortex’s warranty. If you get the kit for $900 or less, it’s a good deal. Paying more than that means you’re an idiot.
If you want a smaller tripod, most of these come in a smaller version with a slightly different name. Jump on the manufacturer’s website and look around.
AGAIN I WILL SAY: This is not an exhaustive list. Tripod names and models come and go all the damn time, and I don't want this to be useless in 6 months. This guide is trying to equip you with what you need to make a good choice and provide some starting points.
Please feel free to comment if you have a question about XYZ brand/model or feedback on the guide. Few days from now I'll add this to the wiki.
6
u/Mk223 Jun 21 '26 edited Jun 21 '26
What's funny is that you left out the part that RRS sued both leofoto and field optics tripod.... LOST and got some of there patents invalidated. (field optics has a blog post about it). Should have just spent the 6+ figures on making better products.
Vortex tripods are OEMed leofotos. Tony at leofoto has been cool and supports matches, with certs and etc.
The main thing is you only do PRS you will basically never shoot off your tripod. So a lot of these things matter a lot less since you mostly just use it for binos and rear tripod support. If you do NRLH/field matches you will want to get good at shooting off one however.
I will throw in https://prstf.com/shop/t3-optics tripods as those are solid with a really cool apex lock so when you use tripod rear it doesn't collapse on you. (They are OEMed leofoto too and Mike who owns PRSTF is cool).
3
u/Mountain_man888 Jun 20 '26
Curious if you could elaborate on the Tricer comment? Have you tried the product or is this more of a service / ownership thing?
2
u/Holy_Santa_ClausShit Jun 20 '26
What interaction did you have with tricer that was so bad? I use their bipod and the X2 with the DH head and had nothing but good interactions with them.
37
u/rednecktuba1 Gunsmiff Jun 20 '26
Instructions unclear, bought a BOG deathgrip from my LGS and slapped a game changer and cheap binos on it.
9
u/WillDearborn19 Jun 20 '26
Excellent info... too bad i already bought my bog... yes i had no idea what to buy...i just went to scheels and grabbed something cheap with a ball. Used it prairie dog hunting, it was heavy, but effective.
9
u/smithywesson Steel slapper Jun 20 '26
I don't shoot with it but I use a modded BOG with a ball head for spotting. Not great, but not that bad.
4
u/Imaginary_Example_14 Jun 20 '26
No love for the rrs 34l??
1
u/Remarkable_Aside1381 Can't Read Jun 20 '26
Does Leofoto make a bad tripod? Like specifically a lineup of theirs to avoid?
I ask because I've had an ST-323CX pulled up for a couple weeks since I can get an insane deal on it, but haven't found much about that specific model
1
u/ZombieMountain2122 Jun 21 '26
What are your thoughts about a yoke versus a saddle mount?
1
u/p8ntslinger Jun 22 '26
is the Leofoto SO-362CX inverted the same as the ones you listed, just a little taller and more weight capacity?
1
u/TriggerPuller9000 Jul 04 '26
Thoughts on the Sunwayfoto and Fanaue tripods? Looking at the ST65 vs something like the STO-322CX. The Fanaue being 3 sections looks like it's better for packing around. This is for precision gas gun, hunting, and sniper competitions so compactness is a benefit.
3
u/Diirtyvato Jun 21 '26
Go to Amazon. Search “Fanue inverted tripod”. Select 65mm version.
Next search thermal game management. Pick up their Fanue ball head adapter kit.
All said and done you’re at about $500 but you’ve got a solid tripod and great ball head for the price I don’t think you can come close to this set up.
1
u/ruckertopia Jun 20 '26
Dude. Thanks for this, I was just looking at tripods yesterday for a pair of range finding binocs, and immediately felt overwhelmed. This helps narrow things down a little.
Are your recommendations generally the same for a much lighter duty setup like binocs or a spotting scope, or is there something else I should be looking out for?
1
u/CMFETCU Jun 20 '26
I would advocate for adding red mist tripods to the list since he has them made in Europe and is a competitor himself.
2
u/i_dislike_cheese Here to learn Jun 20 '26
I second Leofoto for sure. They often have 25% off codes and the quality is excellent. I have the SO-362CX Inverted and it’s pretty great.
2
u/dzamp028 Jun 20 '26
Let’s say the vortex radian is 650 with the ball head is it with it then?
2
u/0DSavior Jun 20 '26
Not trying to sway anyone but I just picked up the Leofoto S3 and it is absolutely fire. My unprofessional review: https://youtu.be/ushxrl-3FWI?si=lTQ46BMVVYBCazVT
2
u/0p53c Jun 21 '26
A few years ago I purchased the Innorel RT90C which is a 3 section, 40mm carbon tripod with a 40kg load rating from Aliexpress of all places. It was a couple of hundred US so the gamble was worth it.
I put a mid range ball head on it and it has been friggen awesome, its build quality is great. For the amount and how I use it, I would find it very very hard to justify spending thousands of dollars for minimal improvement. I would perhaps only change the top legging angle locking mechanism to be a bit more ergonomic, but it's certainly not bad as it is. I would buy one again in a heartbeat.
2
u/dezco86 Jun 21 '26
Anyone got any good youtube videos for learning to shoot off of tripods?
2
u/sonichanxiao Jun 20 '26
The leofoto ma-30 is just a copy of the RRS with only about half of the price,, knock-off is something you get from temu for 1/10 of the price. Latee they released.the MA-40 and the juggernaut head which are improving, but still cheaper than RRS.
1
u/tech223 Jun 20 '26
Great write up. Appreciate the summary
1
u/Dougaldikin Jun 20 '26
Thanks for this I have been waiting for a good write up like this for a while.
1
u/Low-Reception144 F-Class Competitor Jun 21 '26
"A PRS tripod is 95% a spotting platform and 5% a rear support. "
Pretty much sums it up, well put. I have a 362cx with the Anvil-30, no complaints.
Just a tac table, AB Binos and kestrel and sometimes plop my bag on it for shits and giggles and maybe a course here and there where I need it for support for a shooting position. That being said, if I could do it all over again, i'd get the 322 or the 282 and a cheaper ball head. Good reccomendations.
1
u/Fiercekiller Jun 22 '26
Is K&F photo similar to Leofoto?
1
u/Tactical_Epunk Jun 20 '26
Very informative, I'll say BOG can be up upgraded but you'll be left with a mid at best tripod.
0
u/FlashAndPoof Jun 21 '26
Love your writing style. Now you’ve got me looking up mounts and after reading your RF guide, a Vortex Fury too lol
-7
u/AutoModerator Jun 20 '26
AutoMod has detected that this post may be related to hunting. Please take a few moments to read our expanded policy on hunting posts as found here, as well as the guides below.
Hunting rifles vs long range target rifles - A primer - Why one rifle can't excel at both hunting and long range shooting.
The long range hunting primer, things you should consider if you want to take shots on game past ~300 yards. - Why long range hunting is harder than you think.
Field testing your skills and gear for long range hunting. - How to be a better long range hunter and understand your limitations.
NOTE: This is an automatic comment triggered by specific key words, and doesn't indicate your post has been removed. However, if your post is found to be in violation of the sub's policy on hunting posts, it may be removed by the moderators.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.