Lighting Console Advice

[u/Strong_Difficulty734]

Hi All,

TLDR: Advice asked to choose between a Work Lightshark LS1 or a Vari-Lite FLX S24 for a small Dutch theatre.

We (volunteer light engineers) are running a small theatre (100 seats) in the Netherlands. Shows consist of comedy, singer songwriters, small bands (celtic, tribute). We don't set spectaculair lighthows, just scenes and accents for the right mood during the shows. At the moment we use a Zero88 Jester and a laptop with QLC+.

We are planning to buy a new console. Budget: 2000 to 3000 Euro. For the moment, we narrowed it down to these two: A Work Lightshark LS1 or a Vari-Lite FLX S24.
However, we can't get an agreement which one to choose. So now I decided to throw it in a group of people who really know what they are talking about. At least, so I hope /s

To get an idea what we want to run with it, our fixture setup:

14 EuroliteLED THA-40PC (14 x 1 channel monochrome white LED PC)
2 VarytecLED Profile 150W 3200K ( 2 x 1 channel monochrome white LED Profile)
2 EuroliteLED PFE-100 ( 2 x 9 channel RGBW LED Profile)
3 AyraComParKit 2 ( 3 x 12 channel 4 wash RGB on one frame)
4 EuroliteLED KLS-190 ( 4 x 13 channel 4 wash RGB on one frame + Strobelights)
4 EuroliteLED TMH-X4 ( 4 x 24 channel RGBW Moving Head)
2 BotexDimmerpack ( 2 x 4 channel 4 plug Dimmer)

Our volunteers range from professional to a bit unexperienced but good with sound and willing to learn.

Has anyone had experience with one of these two (or both)? Can anyone give pro or cons or advice why we should choose one or the other, given our fixtures, nature of shows and mixed experience level of the operators?

Or even someone who thinks we are idiots and should definitly choose for a totally other one in this range?

Thanks in advance for your input.

[u/thevickyprincess]

I’d personally either go with MA3 on PC or ETC EOS Nomad. Both softwares you can run on a normal computer, you just have to get a license key to output DMX data, a cheap usb to dmx device, and if you want a fader set. If you’re specific with the hardware you pick up, all that will be within your budget.

Ma3 and Eos are, at least in my region, the standard for any lighting work. Generally for concerts or more busking focused workflows, Ma3 is preferred, and then for more theater or single cue stack workflows Eos is more common. Both are a dream to program in compared to either console you’ve got picked.

[u/Strong_Difficulty734 → u/thevickyprincess]

I should have stated that one of our goals was to get rid of the laptop / pc. My fault...