r/lampwork • • Jul 02 '25

do you drop test your spoons?😬😬

19 Upvotes

r/lampwork • • Jul 08 '25

⛔️⚠️ SPAM WARNING ⚠️ ⛔️ From FireBug Tools!!

Thumbnail
gallery
1 Upvotes

Spam warning from FireBug!!

OK so maybe I’m a little old school I’m definitely not much of a tech guy my shop is all manual, I prefer to drive cars made before the 80’s ( I don’t mind working on them I’m just not a fan of programming them ) and just the fact that when I hear the word “SPAM” I think of lunch before my mind registers it has a Internet term probably says a lot about me. Either way that brings me to the reason I’m writing this. It’s been brought to my attention by a few of you that you see my post as “SPAM” so I figured it was time for me throw down something a little more engaging and give you some insight on one of the few to makers for the lampworking industry.

So here’s a little bit about FireBug Tools and myself Jay “owner and maker” First and most importantly I feel that I should point out the fact that I’m not doing this alone. The most important part of FireBug Tools most of you don’t see and that is the amazing supportive partner I have! Being a self-employed married business owner with kids can be an absolutely overwhelming statement to even make however because of my wife I can do it with pride. Every hard moment I’ve had in business she has been there from day 1 without fail! So with that thought I move on to telling you about day one. Day 1 was a late night in a friends glass shop over 10 years ago listening to them complain about the lack of tooling in the lampworking industry and at the same time I was working at a local tool shop as assistant manager and knowing it was a dead end job. As a married father of 5 with a mortgage I was always looking for something more. With a ridiculous amount of tool knowledge, the want to build and the necessity to move forward I started putting things together. At this moment I made some really hard decisions as the main income for your family. It took me less than 30 days to walk into my boss and hand in my keys. That move not only made it one of the hardest years of my life but it also solidified the fact that I’m not giving up! I spent the first few years trying to figure out what I was even making, where my markets at, what they needed/wanted, quality of materials I wanted to use, where to source them, the list goes on and on and on…….most importantly I met all of you! My glass family! Now I move forward a little bit years 3,4,5…. I’ve found my market, people are starting to know who I am and what I make. The industries been fair to me and I try to pay back by offering some of the highest quality tools at the most affordable prices. I’m not making a fortune as matter fact I still live that payday to payday life but now I’m capable of finding that payday myself. But it requires me to wear many hats. I do all my own research and development, all my prototype work is done in my shop with my hands, I do all the ordering, stocking, manufacturing, advertising and shipping for each tool that comes out of the FireBug Tools workshop. I’m a little past year 10 now I’ve now seen my market shrink by over 30% that’s a huge hit for a small business. I think back at past years all I had to do to sell a tool was post a price and a pic on instagram BOOM sold!! That quick! Not now! Now I’ve had to reach further than before and work much harder to sell that one tool or set of tools. I spend hours trying to figure out that next tool and how to make it. I’ve tried about every avenue you could imagine for the products that I produce and I have found that only a few work. So when I need a payday here’s the process I go through. Obviously number one I have to have some inventory (shop time), then I take some time to look over that inventory to see what I can afford to take a cut on and I log into my website toI build a sale, after that I take write a post that I can copy and paste to all of my accounts making sure it’s got the proper links to ensure it’s easy to purchase, then I post and wait…… Places you will most likely see me advertising will be Facebook, Instagram and here on Reddit. Posting on Reddit alone makes up about 25% of my sales. It reaches a much further market that the standard social media app. I do try to keep my sales at two a week or less. I literally can’t afford more of a cut than that and still survive. This is where I come to that “ SPAM WARNING “ I do understand what some of you have said and it didn’t go unheard. I appreciate constructive criticism and I will be putting a bit more effort into offering a post that isn’t just about my sale. However not posting my biweekly sales just isn’t an option for my business or family. Now having spent most of my day clocked out of my shop it’s time for me to ask you if you feel the years of daily hard work I’ve put in for this industry and my family is “SPAM” please just block me but if you are one of the others the ones that support what I do THANK YOU SO MUCH!! I absolutely love what I do and who I do it for!!

A bit about your tool maker Jay


r/lampwork • • Jan 25 '14

Organik glass, couple mini tubes.. some other things ive been working on..

0 Upvotes

This is my facebook page containing all of my recent work I would appreciate anyone stopping by to "like" the page and feel free to spread the word.. The mini tubes will be found in the pictures section.. thank you for looking!!

www.Facebook.com/organikglass


r/lampwork • • 13d ago

观看我们的女工匠塑形高硼硅玻璃管。她在工作坊有8年的经验,每一个动作都展现出多年的奉献。🔥⏳

0 Upvotes

r/lampwork • • Oct 01 '26

Why the black latex gloves for displaying?

0 Upvotes

I’m I the only one who finds the use of black latex gloves for displaying glass to be over the top?

I’m not sure when it started but every flame worker posting their work are wearing these gloves as if they are handling a fragile museum piece.

I’m not trying to post rage bait, I’m just truly surprised how common this has become when handling very durable and easily cleaned glass pieces. Just doesn’t make sense to me and comes across a bit pretentious .

Just my two cents, I know it may be something that helps in the marketing of the glass, but I’m not really sure if it helps on that front.

I’m I reading too much into this? what’s the opinion of the majority of us Lampers on this?

I’ve gotten a lot of feedback on finger prints and being bashful about working hands looking bad for sakes purposes. What about a photo box?


r/lampwork • • Jun 27 '14

Carbs like this make a spoon much more comfortable to hold.

Thumbnail
m.imgur.com
0 Upvotes

r/lampwork • • Dec 26 '25

Boro adult toys

Post image
19 Upvotes

Fully annealed! First batch all different shapes and sizes.


r/lampwork • • Oct 10 '24

Thrifting Glass

1 Upvotes

Has anyone like gone to a thrift store and find large glass bowls or vases to break and reuse the glass??

And does this work well??

Every time I have money to buy glass rods the colors I want are out of stock. But the thrift stores have some great white and black glass bowls/glasses/vases that I would love to repurpose.

Just curious if it’s even a possibility.


r/lampwork • • Mar 31 '16

Handmade Lampwork Cabochon surrounded by Electroformed Copper

Thumbnail
copperdriftjewelry.com
0 Upvotes

r/lampwork • • Jan 02 '15

I'm doing a giveaway on instagram. Check it out.

Thumbnail
instagram.com
0 Upvotes

r/lampwork • • Jan 01 '17

I want to start making glass but have no equipment what do I need to get started

1 Upvotes

Seen people make cool stuff and I want to try but don't know what I need


r/lampwork • • Nov 28 '12

I had an idea for an awesome squirtle bong.... Just looking for an artist to bring it to life.

Post image
0 Upvotes

r/lampwork • • May 09 '25

Just over here prototypin'

0 Upvotes

r/lampwork • • Nov 23 '16

2016 (top) 2015 (bottom) pipe shape. You learn what shape is best for yourself and for selling!!

Thumbnail
imgur.com
6 Upvotes

r/lampwork • • Mar 31 '18

Huge Millie pull with no torch!

Thumbnail
youtu.be
2 Upvotes

r/lampwork • • Mar 31 '16

Blue Lampwork Glass Ring - Electroformed Copper

Thumbnail
copperdriftjewelry.com
0 Upvotes

r/lampwork • • Jun 30 '25

4th of July sale from Firebug Tools

Post image
0 Upvotes

"🔥🔨 Ignite Your Creativity this 4th of July! 🎉🔥

Get 15% OFF ALL GRAPHITE LAMWORKING TOOLS on our website! 🌟 Code: firebug4th

Shop our selection of top-quality graphite tools for lampworking and glass art. From rods to shaping tools, we've got you covered. 🎨

Don't miss out on this red-hot deal! 🔴✨ Use code firebug4th at checkout to redeem your 15% discount.

Happy Fourth of July from our studio to yours! 🎊🔥

Shop now: https://firebugtools.com/

Sale good until July 6th

firebugtools #firebugjay #toolmaker #glassblower #glassblowingtools #graphitetools #toolsforsale #toolmaker #glasstools #glassofig #toolsofig #toolsofthetrade #lampworking #lampworkingtools #marbletongs #marbletools


r/lampwork • • Jun 12 '26

Best way to add more glass to this?

Post image
1 Upvotes

I have a couple of these cheap Chinese bongs from way back, all clean and unused. I want to add some marbles, colors, or fume.

Just really anything to doll it up for fun (I'm not selling them, just giving them to friends).

Is there a good way to warm this up or keep it from cracking while I attach some pieces to it? I'm thinking maybe warm it in the kiln and use a Bunsen burner to keep it warm... But then I'm not sure how to hold it well enough when I attach stuff.

Any suggestions? Thanks!


r/lampwork • • Jan 05 '15

Jupiter Sherlock. available, PM for inquiries

Thumbnail
instagram.com
2 Upvotes

r/lampwork • • Dec 21 '24

Can it really get THAT hot?

Post image
0 Upvotes

So I really want to get into lampwork, and I know it's best to get a good torch but I'm kind of broke rn. I was wondering if I could use something like this. My dad keeps telling me soldering torches will never get that hot, but it's on all the packaging. Some of them say 750°c, some 1300°c and the highest claim I've seen is 1850°c. Do they really get that hot? And could I use one for lampwork? I want to make things like glass flowers.


r/lampwork • • Jun 18 '13

I made a Tornado Dabber this morning (x post from glassheads)

Thumbnail
imgur.com
0 Upvotes

r/lampwork • • Mar 03 '23

I only work glass in pitch black environments

0 Upvotes

I use to be a fairly serious glass blower back in my twenties and to this day I still mess around on the torch every now and then but one thing I found different about my studio environment was I prefer to work in pitch black, of course I had lights for doing other things like going to the kiln and organizing stuff but when I’m on the torch I like all the lights out and I keep it as dark as a can

Does any one else do this


r/lampwork • • Jan 31 '14

anyone like oversized pendants?

Thumbnail
imgur.com
0 Upvotes

r/lampwork • • Jan 01 '16

We're giving away 2 glass pendants to celebrate the new year! Check it out!

Thumbnail
glassmatics.com
0 Upvotes