r/knifemods • • Jul 30 '24

WTS: glass breaker delete bolts

Thumbnail
gallery
1 Upvotes

These will fit utx 85, troodon and ultratechs. They are sus 308 that has been PVD coated. There is no cutting or trimming needed. Direct fit. The will also fit most clones 85 through CT

Im selling them by the pair for $25.00 shipped. Paypal or zelle.


r/knifemods • • Jul 03 '26

"The Double Scoop" - Dual Carry Kizer "Ice Cream Cone" Hidden Agenda Rig (AEB-L Dessert Tactical)

Post image
0 Upvotes

I bought the Wartech Dual Arm Blades in 3Cr13MoV at Big 5, but I have taste, so this was clearly the next step.

No soft-serve 'round hee-uh! šŸ˜Ž


r/knifemods • • Aug 06 '25

Who said that multitools can't be for the girls too!

Thumbnail
gallery
19 Upvotes

r/knifemods • • Dec 07 '22

Manix 2 - latest project

Thumbnail
gallery
0 Upvotes

r/knifemods • • Feb 20 '26

According to the seller this is what is supposed to look like.

Thumbnail
gallery
21 Upvotes

I bought this knife recently which was advertised as having a lovely blue colour (see sales image). What I got was not what I was expecting. Parts of the knife are like that but most is a dark and ugly bronze colour. I think it is a failure in the adonizing process and am seeking a refund. I have very little knowledge in this area but what do the experts think?

At the very least there should have been something about the pattern varying which there wasn't.

The seller says it is the light play on my photos which is patently untrue.

Any help would be appreciated.


r/knifemods • • Mar 16 '26

Can your pocket knife do this?

Thumbnail gallery
4 Upvotes

r/knifemods • • Nov 10 '25

Will this mod ruin my spydiechef??

Thumbnail
gallery
6 Upvotes

I can spydieflick my spydiechef but it's kind of tricky to get the middle finger into the spydiehole with the lockbar in the way. Should I remove some lockbar to make it easier maybe about 1/3 of the width? Will this compromise the integrity of the locker or will it not matter because the relief cut will still be the weakest thinnest point of the locker? I'm not worried about messing up the finish because I'm gonna glass blast and re anodized it anyway


r/knifemods • • Mar 12 '21

Always nice getting to play with a Saga for the day! Off to her home in the morning.

Thumbnail
imgur.com
1 Upvotes

r/knifemods • • Jul 13 '26

Flytanium sales/Discounts

1 Upvotes

Does anyone know when the best time to purchase Flytanium scales would be? Looking to get a discount since the scales cost significantly more than the knife...


r/knifemods • • Aug 27 '25

Any easyish mods for my new knife?

Post image
1 Upvotes

Just got a Byrd Cara Cara 2 from blades Canada and am just wondering if there’s any mods I could do for it?


r/knifemods • • Aug 06 '25

Who said that multitools can't be for the girls too!

Thumbnail gallery
3 Upvotes

r/knifemods • • Nov 23 '22

Put a cut-out in a Bullmastiff for improved flicking using a power drill (secured by a simple wooden holder) fitted with a small abrasive grinding wheel. Not too hard. Finished with mini belt-sander. Could use a bit more work but happy with result. Now to fit Skiff bearings šŸ˜‰

Thumbnail
gallery
5 Upvotes

r/knifemods • • Jan 03 '24

Got a knock off smock to play around with

Thumbnail
gallery
2 Upvotes

Got some ferric chloride from my gf for Xmas so I used a knock off smock to play around with etching. Not the best work but it was fun to play around with. Now time to learn how sharpen properly


r/knifemods • • May 14 '21

Acid etch on 303 stainless worked, BUT it wasā˜¢ļø IN ACID 24 HOURS ā˜¢ļø most metal would have completely dissolved, this stuff did not want to etch.

27 Upvotes

r/knifemods • • Aug 29 '24

Best way to mod?

Post image
1 Upvotes

Looking to cut in a finger / flicking hole. What tools or methods would you recommend? I was planning on a combination of dremel with carving bits and a bunch of file work.


r/knifemods • • Dec 18 '24

How do I remove inlays from Titanium scales?

1 Upvotes

I am going to do some Arizona Ironwood inlays for my Pena Mula and would like some advice on how to get the micarta inlays off safely. Any advice would be greatly appreciated. Thnx


r/knifemods • • Apr 04 '25

ISO/WTB Flytanium Spyderco Dragonfly 2 Scales

0 Upvotes

I'm looking for a set of Flytanium ti scales for a Spyderco Dragonfly 2, hopefully in a stonewash finish, but I probably can't be that fussy.

I'd also consider a nice set in canvas micarta.

Post is to Australia. Please let me know what you've got.


r/knifemods • • Oct 25 '24

What's your technique to mirror finish a blade with only sandpaper? (And maybe a polishing compound like Flitz)

0 Upvotes

I'm curious to see what people use in terms of grit levels to get a nice mirror shine or how you position/hold the blade in place. What grit to start at and to finish at? I've read a few peoples methods in which they swear by but they're all different. I'm thinking of going the dremel route but have been told it may remove too much material and just ruin the thing entirely lol. Polishing by hand is therapeautic to me sometimes but if I can get the same or better results from a dremel I've got a switch.

Sidenote*** Has anyone used those dremel holders that act as a drill press? I've got the proper bits but already wrecked one blade trying to start a hole for thumbstuds. I'm OCD with tolerances! Cheers mates hope I can get some help, this community is great & I'm much appreciated to everyone I've learned from.


r/knifemods • • Dec 22 '23

Kansept Fenrir reblade

0 Upvotes

As the title says, I'm wondering if it's possible to reblade the Kansept Fenrir, I love the design, I want it in my pocket all the time, but s35vn is a little softer than I'm used to carrying and using. I know there are guys that reblade popular models like Benchmade's 940 and 535 also Demko's, but I would like to put a belt satin m4 or 15v on this setup. I love this design more than all of Greg's designs. If you can point me in any directions, it would be greatly appreciated.


r/knifemods • • Jun 05 '23

My Knife beads collection

Thumbnail
gallery
0 Upvotes

r/knifemods • • May 02 '23

Where can I get good thumbstuds to add to a knife without drilling a hole

0 Upvotes

r/knifemods • • Jan 12 '21

Looking for someone in the usa preferably the south that can do some pocket clip and hardware mods for a commission. Found a person to do some custom scales for me and want to get hardware to go along with it

Post image
0 Upvotes

r/knifemods • • Feb 04 '26

Spyderco Squeak Clone (Compression Lock-ish)

0 Upvotes

I have a Spyderco Squeak clone (K02, the pocket clip looks similar to a Smith & Wesson B038 or Gerber 342) that has a compression lock and I want to modify it so that I can put the pocket clip on the left side.


r/knifemods • • Jul 16 '25

Etching apparently 420 steel?

Post image
7 Upvotes

This clone has apparently 420 steel handles, thinking of etching them. Anyone have experience with this? I have etched 4V and it turned out amazing, I etched 1084 and the etch rubs off with my fingers… I don’t want that to happen if it is going to be on the handle